Best LED lights for 2019+ Ram Trucks- Over 50k Lumens!

[@JasonWaterfalls13]

Shop truck. Montana plates. Haha I can dig it. Also, now I want a 5th gen. Great set-up!

[@thelouiebrand]

Man I wish I was closer to you guys!

[@Canuck307]

Wish they would offer a custom cut lower grill for the 20" center mount light bar. Push the light ahead with a factory look would be awesome.

[@patteioval3109]

I got a 2019 1500 ram sport ( Canada ) and I can’t see nothing for lightbar .. I need some help thx

[@alexandriamacleod3144]

will these this fit a 2020 1500 Rebel?

[@SimmCity3]

Does the A pillar lights obstruct your view at any point on or off road?

[@unixdoes]

hoping these can work for 19+ 1500

[@ridgedbullet2420]

F me man. Shoulda got the 5tu instead of the 4th. Like I love my 4th but the 5ths look so much slicker

[@tedwagner9216]

I have a 2019 laramie. I like almost the entire setup, can I get a link with everything but the fog lights.

[@CJCOffRoad]

The links to the products are in the video description!

[@Jkimmer]

What did you use as a switch? Did this truck come with stock aux switches or did you install your own dash switches? I have these same lights coming in the mail but no stock aux switch in the cab. Thinking about Switch pros, but no idea where to mount the controller in the cab

[@CJCOffRoad]

We used the factory switches for this truck, but the Spod or SwithPros units can be mounted in a ton of clever places!

[@Jkimmer]

@@CJCOffRoad Thanks

[@Tinman040]

Any plans on lights for the space left and right of RAM on the grill? Any Coupon codes available?

[@breezyridgeranch]

I've got a 19 tradesman. Any idea if they are working on a fog light option for them? I currently don't have any and would love a set. The factory plastic bumper Insert will pop out if someone would make a replacement that could house a light?!?!

[@CJCOffRoad]

Not sure but we have a hunch the big horn baja designs kit might work? www.cjcoffroad.com/Baja-Designs-2019-Ram-2500-3500-Fog-Pocket-p/bd-fogpckt2019.htm

[@breezyridgeranch]

@@CJCOffRoad wanna send me a kit to see if it fits?!?!

[@famoffive831]

Any blind spots with the Pilar mounts?

[@CJCOffRoad]

Nope!

[@joserarellano5630]

Do you guys provide the light bar in a yellow color?.

[@CJCOffRoad]

You can get a yellow lens if desired!

[@jjoa442]

I have 5th gen 2500, is there any way to mount a 30 in LED bar on the front? Without drilling or cutting.

[@CJCOffRoad]

No there physically isn’t space! This 20” takes up the whole opening in the bumper.

[@meseahunt]

WHY would you not cut the plastic in front of the 20", kinda defeats the purpose of the light if its obscured.... it DOES make a difference!!

[@growtradelearn1079]

Amazing! When will we see some dually setups? :)

[@CJCOffRoad]

Hopefully we get a few cool customer builds to film soon!

[@whateverfits1978]

CJC Off Road send me some lights, I’ll get you a video....😉

[@Sercumference]

You guys should cover something other than Baja designs not all of us have the big budgets their name calls for.

[@jtango9330]

Will you talk about light switches setup. None of us want to cut or drill into our nice interiors on these 19s.plus I haven't seen many good spots for switches.

[@CJCOffRoad]

For the 2019 plus trucks, we recommend using the factory up fitter switches if equipped. If that isn't an option, a switch pros unit is the way to go.

[@michael54amaro]

Hi there I have a 2021 ram big horn do you have a link for the flood lights in the hood with brackets?

[@CJCOffRoad]

Here’s a link: www.cjcoffroad.com/Dodge-Ram-2500-3500-19-On-A-Pillar-Kits-p/bd-2019-a-pillar.htm

[@GriffinRE-Brett]

Where did you get the mounting brackets for the light? I can't find one to mount my 20" in my 2020 2500 Limited

[@CJCOffRoad]

Here’s a link: www.cjcoffroad.com/collections/ram-lighting-kits/products/dodge-ram-2500-3500-19-on-20-bumper-kits

[@tonyboneize]

If I want to buy some badass after market bumper will I lose my front sensors? 2500 5th gen 6.7

[@CJCOffRoad]

It all depends on the bumper, but typically no. These sensors are very picky though.

[@zacjohnson906]

The hood light brackets for the pod lights, Where did those come from? I had a set on my eco diesel.. I like them! And I really wanna see those fog lights for the big horn.

[@CJCOffRoad]

The a pillar light brackets are on our website! We also have big horn fog light kits too for the 2019+ Ram trucks. Just click the link in the video description to check them out.

[@zacjohnson906]

CJC Off Road thanks! I checked it out. Love all the extras! Could it be possible to cut out small holes in the rear bumper for the rear leds? The s2s.. I’m in Fallbrook. Maybe I can swing by and check out what you guys have 🤔

[@CJCOffRoad]

Yeah but the no drill kits are definitely easier!

[@traviskorda3262]

I have a 4th gen 2017 Laramie is there a similar package for my truck? I actually already have brackets to mount a 30" light bar in the bumper. Interested in A pillar option too

[@CJCOffRoad]

We do! Here's a video showing all the options with the products linked in the description! kzbin.info/www/bejne/nn3OYaFmd9Vgi5o

[@ashleygreen1562]

Just feast for the eyes ♨now

[@devonbachus2520]

What wheel and tire sizes are you running on that thing?

[@CJCOffRoad]

37/13.5/20 with 20x9 wheels!

[@georgienunya3753]

Do you offer any set ups for a 19 ram 1500 laramie

[@CJCOffRoad]

If Baja Designs offers it, we sell it!

[@bigsky5248]

Are you guys from the Kalispell area?

[@970tahoe]

Big Sky No, they’re based in Southern California.

[@CJCOffRoad]

The shop is in so cal but the truck is from Montana.

[@echutch]

CJC Off Road Our farm is in MO, but my truck and camper are from Montana also...looking forward to some 2020 Super Duty information from you guys.

[@Fliptheswitch.]

What tanneau cover do you guys have on the shop truck, looks nice!

[@CJCOffRoad]

It’s a BakFlip cover. Works great!

[@richfarfugnuven6308]

The back up lights hang down way too low. They will be knocked off as soon as you offroad it...

[@CJCOffRoad]

They're about an inch off the bottom of the bumper, which is much higher than the hitch on the truck. You'll rip off the exhaust or bottom on the hitch before hitting these lights.

[@shaniarice1054]

Nice job on killing air flow to the intercooler

[@CJCOffRoad]

There's still more than enough air getting to the intercooler through the lower air dam and around the light bar. We've run bars in this exact location on our trucks since 2003 with zero ill effects.

[@jakep8438]

@@CJCOffRoad that was my question and only hesitation in ordering this setup.