Rebuilding A Wrecked 2021 Aprilia RSV4 (Part 14)

Рет қаралды 80,823

CJ Media

Күн бұрын

Пікірлер: 137

@emjaylloren4486 Жыл бұрын

FINALLY A RSV4 UPLOAD! LEZZZGOOWW! 🔥

@jamesharbor7981 Жыл бұрын

make sure the pinch bolts on the fork bottoms aren't over torques I have seen those snap plenty of times

@edgeorge785 Жыл бұрын

cht aluminum paint. Has aluminum in it. Used on my xr1200 triple trees.

@Restorationclassics Жыл бұрын

use some contact adhesive under the seat to glue that bit down. then stretch and staple

@dollaklaci Жыл бұрын

This motorcycle is BRUTAL! Your videos are also very, very good!!! Thank You.

@markhackman8566 Жыл бұрын

Using high quality parts makes it such a better build ,with the carbon put some copper grease on the screws first and turn the screw a bit then back it out until the screw has cut a thread into the mounting lug and for the ones that have snapped use 2 part epoxy glue from the home depo ,good job looks brilliant

@tristanbuckoke9121 Жыл бұрын

Gday mate im a motor trimmer form Australia. To get rid of fullness Just put the seat outside in the sun for a day or use a towel over the top of the seat and pour boil water over the towel

@jamesharbor7981 Жыл бұрын

I have wrapped a rsv4 seat before best thing you can do is take the cover all the way off and use some spray carpet adhesive to stick it down as Aprilia themselves do it on some of the other models using the same seat (125cc versions in Europe)

@showd300 11 ай бұрын

The Ducati Aprilia rsv4 MV Agusta troublemakers they are as fun as hell you always have a laugh riding them

@superbikesquadracer Жыл бұрын

Almost full Matte Carbon fiber Aprilia rsv4 base model superbike!!! Amazing work! Italian masterpiece

@kswright2 Жыл бұрын

for the seat. warm it up with a heatgun on low or hairdryer and THEN pull/staple it in.... that should help it settle!

@brianhurd9071 Жыл бұрын

Use a heat gun when installing the seat cover. Makes a world of difference

@paul-hj4lr Жыл бұрын

Loving the carbon fibre look, but those bolts replacing the pinch bolts would mess with my head....

@TheChaz81 Жыл бұрын

I got a Tappezzeria on my RSV4 with memory foam. Best upgrade!

@torr-michaelbennetta9785 Жыл бұрын

SO glad you finally got the pneumatic staple gun!! Life changing, isn't it?!

@lukasgarage956 Жыл бұрын

Killer build......keep em going

@jerryshepherd6528 Жыл бұрын

You have to say, the Italians make some great looking bikes, and then improved upon by you

@williamarms2trong857 Жыл бұрын

You need to use glue on your seat for the high spot

@BIGKAudi Жыл бұрын

Cj media, when a state officer inspects your bike what do they check for, cuz I have a Copart savage title bike and next month I’m getting mines inspected what should I expect? 😮

@mendingmotos Жыл бұрын

That dry carbon is amazing

@afriyanto9967 Жыл бұрын

indonesia selalu menonton mu CJ 👍👍👍

@buggerlugz6753 Жыл бұрын

Just put a chunk of sponge under the seat cover then staple the middle back together on the back.

@mohamedmontaser1250 Жыл бұрын

Dude i follow you from Egypt can't watch your entire videos for not having much time but you are a LEGEND

@MrPAlberst2 Жыл бұрын

That's a thing of beaty! You sure did a great job!

@GhostedPerformanceCF Жыл бұрын

Do rivets. And since it's carbon. Use washers on both sides. That way it don't Crack the carbon and has a firm grip on. When pressing it on.

@ksboi29 Жыл бұрын

CJ got me looking at copart for wrecked bikes!

@Nasoulis34 Жыл бұрын

Been waiting for this too long!❤

@Sauce05SRT Жыл бұрын

Ugh.... that RSV4 sound is soooooooo good....😍😍😍😍

@zackySZN Жыл бұрын

Needs some aprilia decals livery for sure CJ !!! and the front aprilia winglets😊😊😊

@MrDanieburger Жыл бұрын

Put some stickers on the bike to break or highlight the carbon. Pinstripes or something. Still loving the vids and still waiting on a GSXR

@dogsnmotorcycles Жыл бұрын

This is about the nicest looking bike yet.

@dieterich6533 Жыл бұрын

Use adhesive for the seat leather

@monterocorner4815 Жыл бұрын

Hello from INDONESIA 🇲🇨

@trygvejohannesen4202 Жыл бұрын

Kabar baik? 😊

@monterocorner4815 Жыл бұрын

@@trygvejohannesen4202 sangat baik🔥

@zamzamofficial7496 Жыл бұрын

Iya bang

@bangmj69 Жыл бұрын

Heeh mang kalem. 😂

@kamsidwiyan8158 Жыл бұрын

sudah makan?

@VMorghulisreal Жыл бұрын

THAT'S A MASTERPIECE, CJ. Your MASTERPIECE!!

@davidtalturejman9185 Жыл бұрын

What a bike man

@davidtalturejman9185 Жыл бұрын

Amazing!!! What a mechanic you are!

@GL-tj3xe Жыл бұрын

🎉🎉🎉Just ordered some hoodies thanks for the hookup 🎉🎉🎉 can't wait to see the north Carolina blue 💙 let's goo 😄

@GL-tj3xe Жыл бұрын

There's a road called the Dragon between Carolina and Tennessee , super Kool something of 300 turns in 20miles 😊❤

@mjc1177 Жыл бұрын

Nice build CJ the bike is looking fire! I also rebuild bikes myself and love watching your vids keep it up.

@avx_irham2806 Жыл бұрын

Kayaknya banyak penonton dari indo

@paulomonteiro485 Жыл бұрын

Aprilia the best ❤🇵🇹

@hoppiemacv8604 Жыл бұрын

I was thinking Red Rizoma Mirrors. Or half the mount in Red. To where the Mirror twists. Or just the edge's with a Red pinstripes. To tie into the Red Tail Fen would look good. Or Paint the Hand Wind deflector Red you're not a fan of. To help tie to the Tail Fen. Either way she's a Head Turner.

@shashankn4523 Жыл бұрын

Having a suggestion, You could make use of plastic revet's for the flaring mounts

@davidtalturejman9185 Жыл бұрын

Thanks man!

@poojamoharkar9767 Жыл бұрын

Bro can you post the video every 4 days if it is possible Love you from India

@sadiqrocks167 Жыл бұрын

Lovely bike episode😮😮❤❤❤ my dream bike

@0youx Жыл бұрын

GREAT WORK BRO WHAT A BIKE !!!!

@123mus Жыл бұрын

Well com back brother ❤❤❤❤❤

@AmanDeep-lg9tq Жыл бұрын

Broo I am in love with this colour scheme definitely worth watching your videos But you should probably upgrade your GoPro set to 12

@davidtalturejman9185 Жыл бұрын

Oh yes CJ another video!!!!

@QMAXIMUS Жыл бұрын

🤌A work of art! Looks killer!!! 🔥🔥🔥

@tangywinning776 Жыл бұрын

#carb gains #stackin carbs #carbohydrates

@yotoma Жыл бұрын

Excellent!

@Medi_CA-TN 10 ай бұрын

Did I miss how cylinder’s block and valve rust was cleaned

@no.name.lol.no.245 Жыл бұрын

Small nut fixed with two part resin should work on the fairings

@CJMediaOfficial Жыл бұрын

thats a excellent idea

@USAHockeyCoaches Жыл бұрын

This is a much better solution for your lighting problem. I bought mine at Fleet Farm. Bergen 100 Watt LED Hi-Bay Work Light. Also buy the wireless switch to make it super convenient. Two of those will be brighter than all 10 of your fluorescent tubes😂

@ezzaafreda9903 Жыл бұрын

Gotta admit the rsv4 is hot

@momoansari1195 Жыл бұрын

Great job enjoy

@luismirsv4855 Жыл бұрын

Un seguidor desde España

@ewrnew Жыл бұрын

You did an excellent job with that bike. for how much are you going to sell it? do not forget to remove the canister to keep the heat low.

@matthewalexander2436 Жыл бұрын

Beautiful frigging bike bro.. Take good care and God bless! 💪❤👍

@stannedev1280 Жыл бұрын

CJ, don't smashed this one. Good luck

@markphillips2072 Жыл бұрын

Heat the leather or vinyl with a blow dryer to soften the material then pull it tight 😊

@lices Жыл бұрын

Beautiful cj!!!❤

@LucianoDesouza-jf9qr 8 ай бұрын

Guerreiro 🐜

@mehedihassanemon7265 Жыл бұрын

you can hold it to fire,for get that perfect fitment ✌️

@1000CC_Mandra Жыл бұрын

RSV is lookin goood love the Carbon I'm slowly doing same to my Tuono. If you come across a Carbon rear wheel scoop like on the X model, I would love to know

@xdinked7502 Жыл бұрын

Riv nuts should do it? I could be wrong but I personally would try that, putting the riv nut on the underside piece, then drill a hole big enough that's slightly tight to connect the upper piece with a couple washers to the underside riv nut, would that work or just rip off?

@emiliodabu59 Жыл бұрын

Love watching this show'

@CJMediaOfficial Жыл бұрын

Thank you!!

@bathbath3616 Жыл бұрын

Amazing

@javieriturbide3973 Жыл бұрын

Nice work 👏🏻👏🏻

@kevin.Rsv4 Жыл бұрын

How is the fitment of the carbon side fairing under the seat?

@Dhmedia53 Жыл бұрын

Big fane broo from srilanka 🇱🇰

@wbbikers1884 Жыл бұрын

We demand videos twice a week (plz)

@jonathasmenezes2306 Жыл бұрын

O som que essa moto faz é muito bonito,diferenciado

@gray5099 Жыл бұрын

Personally i think it just needs a little something to break up all the carbon some Aprillia decals or something

@stevenfalconer5797 Жыл бұрын

Your rotor ducts won’t last long with those nuts on, you need lock nuts. ‘Nylon may do but it all depends on how hot they get. Maybe try drilling and taping the carbon for normal screws rather than self tapers and use locktite. Carbon does look good though, keep this bike coming or try a Tuono, it’ll blow your mind

@al-twenty_seventh4464 Жыл бұрын

Iam waiting you bro...where you gone man😢

@biondod1 Жыл бұрын

awesome bike ❤

@DuyPNT Жыл бұрын

Can you tell me the carbon brand name or the store where I can buy it?😇

@DuniaHanyaSementara Жыл бұрын

Malaysia 🇲🇾☑️

@ruuddekkers4336 Жыл бұрын

hi CJ, my name is Ruud and I live in the Netherlands. I always look forward to a new video from you. I love how you rebuild the motorcycles and cars full of enthusiasm. I hope to see many more projects from you. I think you are an inspiration to many. maybe I missed something, but where did the BMW go? Did you sell it? Kind regards, Ruud Dekkers from the Netherlands 👍👍👍

@triumphracing351 Жыл бұрын

brake rotor cooling is useless, the brake caliper needs cooling. the brembo m50 used to get a fading at high speed tracks like mugello or hockenheim gp.