I Snapped It - Tesla Model 3 Trunk Vinyl Wrap - Very Hard & Detailed

For Exclusive new 4K Videos on disassembly and wrap installation visit www.ckwraps.com
Hexis matte red currant has a fantastic finish with a very heavy metallic appearance. The metallic properties to the film do make it more fragile to install as demonstrated in this video. At 6:20 I snapped the piece of film by pulling too hard without adding any heat. The film is sticky yet it leaves no glue lines and the air release works fantastic. Personally, I would rather use a film that's harder to use but gives a better overall appearance.
Showing you how to wrap a Tesla Model 3 Trunk in one piece.
Certified Training visit www.vvividhq.com/get-certified
Email [e-mail] to save 20% on your Hexis or Vvivid vinyl order
Get 70% isopropyl alcohol here amzn.to/2ErcE6s
Get 3m 301+ masking tape here
amzn.to/2Iwa3uL
Vvivid Shield Guard here
amzn.to/2XPCZSF
Vvivid knife with 30° blade here amzn.to/2HQG3Ku
Vvivid Rev 4 heat gun here amzn.to/2HQiC3V
Vehicle degreaser here amzn.to/2CNkXZj
Soft magnetic tape measure here amzn.to/2FRHHbt

[@lawrencebecker2431]

Like when you show the mistakes or problems you run into and show what you did wrong and how to fix it. Nobody’s perfect. Great video👍🏼

[@christiancatalano5880]

Lawrence Becker he is the only one that shows it, every other wrap company posting videos will edit out a complex corner or something they have some problems with. That's why I love Christian and what he shows, very informative.

[@andrews4276]

I love the dog chasing his tail right after, lol.

[@MadCloudDisease]

"Nobody's perfect", I agree, that's why Google comes to me for answers they can't provide.

[@MrDaveinkw]

Christian, I'm not sure if you read these comments but I cannot thank you enough for providing these videos to your subscribers. i recently purchased my step daughters 2011 Hyundai Genesis coupe which has a terrible paint job where the paint was flaking on almost every panel across the vehicle. Initially I was going to get the car painted but after watching your videos I gained some confidence in thinking I should be able to do a wrap; I power washed all the lose paint, did some minor body work and followed all that you have listed in your videos. Today my wife and I applied Avery SW900-653-M Gloss Dark Blue Metallic to the front two fenders and all my neighbours were stunned at how well it turned out. We live in Waterloo but often come to your area to get groceries at the Yummy market, I will most certainly drop in next time I'm in the area to thank you personally for your KZbin channel - it almost has me tempted to take a course and develop some refined skills. Regards.

[@magnumopusdesign9148]

Perfect timing with the dog "chasing his tail" right after you tore the film! Thanks for sharing your pro experiences, they have helped me with my personal project! Result? Less of me "chasing my tail"!

[@MrUkielover]

6:41 Your doggo is awesome

[@Michael-jq5pf]

Ck you are my inspiration, I am in the process of getting hired as an intern at a local wrap establishment, and I owe so much of that to you! Helped me teach myself a bit and get me interested. Love from Seattle WA!! 🤙

[@bevmcmullan-kungl8089]

Wonderful, Michael. Congratulations!!!!

[@Michael-jq5pf]

@@bevmcmullan-kungl8089 thank you!! I'm excited!

[@scottgillig908]

Hello Michael, Well, if you've been watching Christian, you have definitely been watching the best. Best of luck on your new job. You'll always have Christian's videos to resort back to for guidance. My very best to you, Scott

[@20tea]

I'm another fan here in Seattle! Love checking out your videos. Helps answer my questions when applying vinyl wrap. Thanks!

[@austynalmasy7197]

I love that you show your flaws dude, you've done a hundred wrap jobs without that happening and you still show your mistakes. ive learned you have to always be humble with the film. it bites you in the ass when you're the most comfortable .

[@84eurospec911]

So glad you left that rip in the video, makes me feel better about how many issues I had wrapping my car. Awesome work as usual! Keep the knowledge coming!

[@zenvent]

I wrapped my model 3 after watching some of your videos, very helpful! I ended up doing a seam on the tip of the spoiler to make it easy (and I ran out of large enough pieces). Interested to see how you do the front bumper as I struggled in that area.

[@PaulNicolau]

the doggo in the background is just chilling :)

[@MrDJTeasy]

Thumps up from Germany! Please more of those Mistakes when they happend! They teach us... Love your Videos!

[@konartist66]

You're a beast with the wraps 💪👏🏾

[@NsXy]

PLEASE DO MODEL 3 FRONT BUMPER

[@bephrem]

Yes!

[@youtubasoarus]

You're an absolute wizard with these wraps man! I look at that and i'm like, no way.... you make it look easy! :) Beautiful work!

[@CharmleysChopShop]

Glad you left the mistake in there, you did a good job handling it also. Stayed calmed moved on, good stuff.

[@chinohaynes6605]

You are Truly a Master of your craft. Love the videos. 👍🏼

[@pastpianist]

I Just bought some vinyl for my m3... going to install this weekend after binge watching all your videos

[@oXinaboX9]

First off, thank you! You're effen amazing brother!! Then, countless hours watched over the last few weeks, this is by far the best video. The dog chasing it's tail right after the rip.. Priceless bruh..

[@ryleydoh]

Will you eventually have videos covering how to wrap every panel/ section of a Model 3? Keep up the great videos!

[@gpadz2162]

It's not a shame to break some stuff and it's part of a video to show and learn what will happen. Since you never edit or cut those part of video it means you are true to your fan.it helped to the viewer to learn everything about wrapping a car..big Thumb up to you..Great video

[@Dustin-Wood]

So, first video of yours I watched was wrapping a Camaro spoiler, since that's what I want to do with my car. Decided that it was probably going to be too much trouble to do myself. But then started watching more of your videos, and no I'm probably going to do it, and maybe consider racing stripes with the knifeless tape. The thing that worried me was wrinkles and vinyl doubling over itself, but seeing how you handle it, doesn't look like its a big deal at all. Looks pretty forgiving. Thanks! Subscribed.

[@lfearless1819]

Buy bubbleless film. Its pricey but will actually safety you money n headache

[@Frankencougie]

Thanks for the work you have put in to help others. You are a good human being sir, I wish you success in whatever path life takes you.

[@andylane1968]

It happens to the best of us Chris but so glad you left it in to show eveyone what can happen. Oh what's your lovely dog called.

[@hassanalmaanaki4134]

You always have the best videos on KZbin. Thank you for sharing

[@markl7520]

@CKwraps is king, always great demo's

[@iWeasel410]

Great vid! Can we see more of your pup? Watching it chase its tail was hilarious.

[@iWeasel410]

5:36 - is he recording? Hmm can't tell, lemme take a closer look 6:41 - MUST BITE TAIL 6:48 - oh #&#@$ he is recording, play it cool, play it cool In all serious, thanks for showing your successes and failures so other can learn.

[@bigdaddy741098]

Another fantastic tutorial and awesome colour

[@DIDGZONEW]

Great Video! Ck! Great tips!

[@coolbull101]

Great work CK! Would you be able to provide any tips on how to DIY wrap if you have no indoor place large enough for your car? Like what would be the best environmental factors such as sunny/cloudy/sun/no sun/ morning/ evening and best practices. Thank you in advance

[@frankiewalnuts]

I'm a hexis trader... Best stuff I've ever used... switched from 3m and avery...

[@lummy321]

Still the best wrapper I've seen mate ... CK wraps rule ... Peace bro 😍

[@auyobimuhammad2808]

I like because you show all with details thanks lovely work

[@twinkmaster2]

Thanks for showing this, now i know if im ever going to wrap a model 3, to simply put a seam on the bodyline😁

[@antman1097]

Thinking about doing this wrap on a widebody challenger.looks great.

[@WarlockSRB]

Like your work a lot man, cheers for all this tutorials, hope I'll be able to do my 159 SW in few months...

[@jonathanmatey3594]

You are a rockstar! I wrapped the back of my Tesla Model 3 front seats in carbon vinyl and would have benefited from some of these techniques

[@ozzyanddad]

absolutely fantastic... i have such an appreciation for what you do, as i have tried this on my own :)

[@scottgillig908]

Brittle vinyl, heavy coating weight, very sticky = big problem. Take the car to Christian, no problem, Mon ! I was listening to some music, and left the volume up a tad too high when the vinyl snapped. Did it scare the crap out of me ? Ü Hell yes it did LOL. Christian, great job. That vinyl didn't look like it was going to be easy to work with when I saw how sticky it was. I wish people could get a good whiff of how good vinyl smells when you take it right out of the box and the bag the roll comes wrapped in. My best, Scott

[@J05BNL]

Great instructions!

[@Michael-jq5pf]

I had this video playing a short bit ago, and wondering why you were specifically talking about the model 3 being difficult.. then a 3 drove by me and I realized " oh, yeah... That'd be a tough one." Ha

[@bephrem]

Thanks for this!!

[@danielwenske1107]

That was fun to watch

[@bobbaker8223]

Thanks for the tutorial and effort in your videos. Looking to wrap my model 3 also , can u do a front bumper tutorial plzzz?!!

[@BARTOKBRKtv]

you keep it realm i love it... :)

[@billtcheng2316]

Enjoyed your video! Can the wrap be easily removed later and will it damage the paint job?

[@Yang-xv1on]

Perfect video. Love it. Please post front and rear bumper wrapping. Please.

[@bombaydan]

Great content

[@bobbaker8223]

front bumper tutorial incoming! Many here in the comments are requesting including me! Can’t wait!

[@dieglog]

I like to much your work 😎

[@orestwolfgang556]

Props for leaving the break in there, shows its not as easy as it looks

[@anatolyspencer2730]

Can you make a playlist of the entire model 3 wrap process panel by panel?

[@jordanandrew15]

Is a front bumper video coming for the Model 3?

You've got to be confident in your skills to actually show when things f**k up! That looked like a total PITA to do so well done on a great result and good on you for showing that even professionals can sometimes have their work cut out for them... no pun intended!

[@meowmixmeowmix]

Hey there. I just ceramic coated my Model 3. I was wondering if I need to polish all the coating off before applying a wrap. I'm planning on buying the Vvivid Satin Ice Chrome for my car as soon as they have it in stock. What size roll should I buy? I've already chrome deleted the car so i wont need vinyl for that. Great channel! Used your channel to do my chrome delete. Now I'd like to move on to something bigger.

[@under_wraps]

If this was say 3m or avery would you have done the beginning differently because of glud lines? I'm asking more about the start where you heated it up the middle to pull the 2nd half?????

[@hgutierr]

That 1st take is classic! You should make a video with just the bloopers. LOL You make it look so easy. I'm wrapping my 2007 Tacoma & the bumper is kicking my @$s man! It's a humbling experience I hope I get through it soon. Air release tool!? Hello! I was wondering about that since I started. Does it work with all wraps?

[@fernandoortiz4003]

Eres un crack amigo Saludos desde Ecuador

[@frankiewalnuts]

You can mix a spray bottle with 5-10 drops of washing up liquid to 1-2ltrs of water and spray the vinyl back... similar to what they do when tinting windows... This will help avoid the tacking

[@matthewfox3760]

👍🏼 wow nice job That looks like a nightmare to get through

[@gp_e30daily27]

Nice one, as a professional any chance you can explain how to wrap E30 touring (estate)? Thank you

[@AlphaFlight]

That's easy. Buy a different car

[@kennethbellmyer9241]

Nice hack & slash...

[@nuclearbum9858]

will this stuff stick to fiberglass custom speakers or just to paint finishes

[@vorticosecomb]

Can I ask how much you quoted this person? I was thinking of wrapping my mothers as she is always talking about how cool it is

[@CTP1111]

reminds me of my aston martin V8 vantage trunk... that was a pain -- also was hoping for the slowmo replay of the snap @ 6:00 LOL

[@EM-fi2qg]

When it comes to scraps, what shape and size do you decide to keep so you dont have a massive library of odd extras.

[@CKWraps]

I normally don't keep anything but what's still on the roll

[@AuthenticBenny]

How much wrap do I need to order for my model 3

[@rememberussliberty1822]

Hey CK Wraps, thinking of wrapping my truck black (either gloss or satin). In your opinion what is the toughest wrap as far as scratches, rockchips?

[@mrjafs4616]

Rick B i wanna know too :)

[@SammysCruisers]

Gloss will be harder to wrap and more susceptible to scratches. The film is thicker and tougher to deal with.

[@markwatrous3796]

Frickin wizard!

[@RSWarriorBryan]

Hey, I know how hard it is to answer all subscriber comments, so it may be a shot in the dark. Looking to wrap my tank and loving that Avery satin chrome red. Only able to find it a few places and it's alway different names it seems like. Is the actual name, satin red chrome? I keep finding things like frozen red satin conform, etc... Love the videos man, I know you will keep them coming!

[@CKWraps]

Order from Metrorestyling.com and it'll be legit

[@RSWarriorBryan]

Thanks for the reply! That was actually one of the sites I was looking at, so that's where I'll go through. Want to do black stripes on it. Would it be best to do them over the satin red, or would you cut the vinyl and put the stripes directly to the tank? Kind of like you did in your video with the black and red stripes. Thanks again for the reply, you're awesome!

[@rudyc79]

I cringed when the wrap snapped, but that dog chasing his tail made me feel way better.

[@samqarib7292]

I'm Iranian. very very good and nice brother

[@Mr.Kerokerokero]

A basic question: why not leave more film for easier installation rather than stretching it? For cost?

[@yulz1179]

what size length do you recommend for this car for beginner? 5x25? 5x20?

[@Tesla_Armando]

Don't sure if he said it in the video but what color is this vinyl?

[@David-rk2cw]

Just did a customers a second time it's passable but since it's matte thier are some slight distortions that's really bothering me.

[@K.B.E.B]

Can you get those extra hands on Amazon? Where's the link? Description?

[@aidenwatson1998]

Anybody know any places to order good quality vinyl wrap that can be deliver to the UK?

[@hanes2]

I didn't see what happened because there's a doggy in the background.

[@nestorruelas2613]

What kind of vinyl Did you use?

[@tungvlog1465]

I think you forgot to tell us what kind of red vinyl is this? Thanks!

[@kennethbellmyer9241]

It's your attitude... Damn it!!!...sorry I blew up ...

[@UsernameBlank123]

Which vinyl are you using?

[@WatchnItMove]

Can you do the whole trunk in one piece? As you just stated, the trunk is wrapped…. But it’s missing the whole bottom half.

[@kennethbellmyer9241]

Are the reds more expensive???......,.

[@dsthings8695]

How many feet to full wrap?

[@untilthemoon137]

Why are wraps so expensive? Im new. Thanks!

[@zigfridtijunelis616]

You will understand after you will do your first colour change wrap ;)

[@alexwarkus7553]

Your reaction is so cool😁

[@kpkpkpkpkp209]

I'm not even trying to wrap my trunk. This is just interesting lol

[@kreliss2245]

I already get frustrated when applying a screen protector to my phone...real craftsmanship.

[@safanachanel231]

Assalamualaikum wr wb I am from Indonesia watching this video

[@rudyomic21]

At 5:13 a wolf walks by in the background.

[@M2C_mike]

I watch another wrap channel.. installer always uses a torch to heat material ..is there a reason you use the gun instead.. I wouldn’t use a torch myself in fear of damaging something on the car

[@frankiewalnuts]

The alternative is to use heat to make it more malleable but you run the risk of colour burn

[@jonjacobsen1897]

I see 👍🏼

[@mrfumetsu]

I think I know why that happened after watching it a second time. When you were lifting the vinyl off and it was getting stuck on the edge, before you re-adjusted the grip angle, the vinyl did stretch out a bit there @6:03. Then when you went to pull on that area after re-gripping, you pulled it like it had no tension on it at all. I've whacked myself in the face :/ You the man.

[@X862go]

Husky at 6:40 🥳

[@j_d8624]

It has to do with the weather as well

[@Manufalket]

👍👍👍👍

[@beauburnett8479]

Hey man I own a wrap business in Missouri and have been doing wraps for the last 5 years or so. How do you get people to pay for a good wrap that takes time Most of people around my area will go to another shop because they are a few hundred less and not the quality.

[@rosey9806]

I'm in MO and I study this dude, hire me 🤤

[@beauburnett8479]

rose y do you currently do wraps and have you been to any wrap classes.

[@rosey9806]

@@beauburnett8479 I've been learning on my own car almost exclusively outdoors and I haven't been to any classes.

[@beauburnett8479]

rose y ok. Well what part of Missouri do you live In.

[@rosey9806]

@@beauburnett8479 STL area! what's your shop called?

[@jangzstarr]

hahaha love it! Thats why we got love for you man keeping it real. Thank you for keeping that in. I did the same thing when wrapping my dad's car with a premium vinyl and it snapped, so it's not you at all. Shit happens ^_^

[@luzgonzalez2838]

HEY SOMETIMES 💩HAPPENS TO ANYONE...DON'T WORRY ...BE HAPPY!😃