How to vinyl wrap your mirrors (outside). Learn how to vinyl wrap alone by @CKWRAPS

Material used: vvividshop.com
More training: www.vinylwrapt...
My Favorite tools and accessories I use at my shop:
Heat Gun (Instant heat, no waiting) - amzn.to/3WWHmNC
3 Pack Squeegees (soft, medium, hard) - amzn.to/450sOP2
Wrap Gloves - amzn.to/4aDRAWt
Knife (Have not found anything better) - amzn.to/3KghNj8
Hex Garage Lights (perfect temp for detailing and wrapping) - amzn.to/3wPlut1
Rolling Bench Stool - amzn.to/3UZO1Ej
Tool Cart - amzn.to/44X3nxT
Scratch-safe Ladder - amzn.to/4aDaAEn
Headlight Tint (I put that %^#-$ on everything) - amzn.to/4bYoMZB
Knifeless Tape - amzn.to/3Vg46XK
Wrap Sticks - amzn.to/3wZK1eM
Magnets - amzn.to/44X3cCF
Here's a quick how-to for all those 4th gen Eclipse owners out there. How to vinyl wrap on your own. Follow me to learn how to vinyl wrap anything
VViViD True R Black Carbon can be found here www.vvividshop.com

[@CKWraps]

For Exclusive new 4K Videos on disassembly and wrap installation visit www.ckwraps.com

[@renjitbhattarai4584]

hey CK where do you buy your vinyl? i'm trying to wrap my car so i wanted to where should i go to buy the good one, any websites. thank you man and good job.i want to do my mirror soon

[@Vinc3M4st3R]

love the job you did. for me as a beginner, it's well explained and it helped me a lot :) keep doing those videos :D

[@Scotty_in_Ohio]

First minute in to this I thought this guy was a clown. After he started in with the heat gun he really knows his vinyl.... Great video!

[@gafrancisco]

bullshit ...still a clown...overstretched... to much heat ... when in cold weather gone shrink

[@TheBooze13]

Gilberto Francisco haha do you know who this guy is? clearly not

[@gafrancisco]

@@TheBooze13 i know now who this guy is ... seen most videos of the guy and he is a pro ... in 2014 ... he was a clown ... but then he learned and now is the best ... by the way ...he was cooler then ...now with all the tattoos we looks more a punk ... even the hair was greater then in 2014 :D

[@concrete490]

@@gafrancisco it's going to shrink cause of cold weathe?...but heat is what makes it shrink back into place so you sound like a clown actually.

[@cyqloneonline4855]

@@gafrancisco we are here to watch a video about wrapping a mirror not how a guy looks like. Are you gay? I dont care how this guy looks like. Probably you do.

[@jeffreyheelan4850]

So I have to say. After practice and practice I've started wrapping my car and my girls. And with alot of practice and re watching your videos a million times. I've been super happy with it. Thanks for the great videos bubba !

[@SirSmokesAlott]

Always make sure to cut out a breathing hole when wrapping your girls though, i forgot one time and when i returned it was NOT pretty..

[@alexandruioanagafitei3840]

really nice explanation about everything through the entire process, i did not lack any intel. usually, i don't comment, but this had me done ;) nice tutorial!

[@Prepper_Raider]

I think I watched this 10 times while I wrapped me mirrors!

[@pointlessCRAYtv]

Despite all the hate I see in the comments, I think you did great and it looks awesome

[@CKWraps]

Thanks dude, as I mentioned in the video this isn't something that should be done outside or in the wind. I'm just merely demonstrating how to do it. The environment you choose is your choice

[@pointlessCRAYtv]

Vinyl Solutions Exactly, people just need to chill out

[@Deathnote0-_-0]

I can't see the fail in something that actually came out good.

[@ronharmsen8466]

Nicely done. Good tutorial. You earned a new subscriber.😊

[@Gunny559]

Wow I watched the entire video with ease. BEST DIY vinyl wrap I've watched bro! Good job, lol looks awesome.

[@CKWraps]

+JediMasterJF thank you, check out some of our other ones which are more advanced

[@CKWraps]

Kudro Rico The mirrors hadn't been done on this car yet so it wasn't a re-wrap. This eclipse belongs to a friend of mine who I sponsored with a full wrap. As for brand, I prefer to stay away from 3m. I find it's hard to work with and very over priced. Their carbon fiber also isn't as nice as Vvivid Vinyl, I only use carbon fiber from Vvivid Vinyl. I would recommend using Avery Dennison if you're a beginner. Avery is very easy to use and also more cost effective, I consider Avery to be the Rolls Royce of vinyl brands.

[@marlongereda1045]

can u do a video on how to wrap the front end pls :-D

[@14infallible]

CK Wraps what do think about orafol/oracal 970?

[@mohdnornorshei]

cara warring side mirror viva

[@mohdnornorshei]

CK Wraps

[@damalmeemaduma1637]

Indian dance

[@achbanilacran2061]

The dude had the skill from way back then! Nice work!

[@acerodriguez6884]

Can you please take longer to remove the wrap jeez

[@Sky1]

For those that want legal dark window tint, "No officer, it's not tint. It a wrap!"

[@cmykimberly]

Nice movado you got there. Thanks for the video!

[@ducstroyer]

I don't know about the highly trained professional, but for the average dIY'er - these are some helpful hints. Something to go by... Thanks for sharing!

[@rellom777]

Damn bro. You've come along way. Love your channel.

[@nzpyr55]

Props on the Movada Watch. Clean & nice deatiled work! TY

[@thebardock6785]

Another tip opening your driver window might help you work better angles

[@kajus001]

MORE MORE HEAT :DDDDDDDD .carbon texture is GONEEEEEEE :DDD

[@mickcoomer9714]

I like the pre-heating and stretching but I think I would have fixed the free end to a plastic rod or tube first to give an even stretch and remove the risk of it flapping back on its self in the wind.

[@acat6821]

Stretched that film way too far, the pattern is damaged.

[@juandontworryaboutit4150]

A Cat yup i noticed that too

[@great4ever845]

Juan DontWorryAboutIt yup

[@eflem7708]

That's the hard part about CF vinyl, you heat it and stretch it, it distorts the weave pattern

[@fomocowboy]

Pattern looks pretty damn uniform to me by the time he's done. Where's your video where you don't damage the pattern?

[@joellarrysr9977]

how much should mirrors cost to wrap professionally?

[@fairlanewhip79]

You make it look so easy... how do I avoid creases and bunching on curved surfaces? Your videos are great, you explain things the same way I would when showing a layman a new skill.

[@Roadsurfer2k11]

Heat gun and relief cuts at angles worked for me. I just did bottom of a spoiler that i had to work 3 different angles on a surface..wasnt easy. Lots of heat and cutting to work it in

[@Adrian-op5ni]

He does make it look easy. I finished my roof today and it came out awful. 😂

[@JustinAbroad]

I hope no one wraps a mirror like this. Go look at his newer videos. This way is bad and no one should do it

[@anncarnicer679]

i am a car wrapper for sure that kind technique in just few hour will fill off 100 percent

[@juandontworryaboutit4150]

Greatly appreciated for you taking the time to talk about the steps and few extra tips, I'll be wrpping the interior of my e90 cheers from California

[@Pseudopregnancy]

Damn I think this is the oldest video of yours I've seen yet, just noticed no sleeve!

[@burningmanmike]

That looks like enough vinyl to do both mirror caps. Could you have cut it in half before stretching, and saved a little money?

[@angie624]

Thank you, plan on wrapping the black pieces that hold my mirror all the paint has chipped off thanks

[@sambajazz69]

Thank you very much. I almost everyday watching your video. Can I ask you one thing? Grand cherokee side mirror, Can I do this? Grand cherokee site mirror is so difficult to me T T

[@dennismaddy5706]

Guy took way to long. Not enough heat at the right times AT ALL and all his reasoning and confidence and he wastes so much vinyl and just thinks he's doing a good job !? 😂.

[@paulb8153]

Hi ck wraps. I had ago doing my wife Fiat 500 wing mirrors. I made a right cock up. I tried to taking things slowly but the vinyl wasn't big enough. After watching your video I'm going to have another go. Many thx mate. Cheers from the UK

[@wolvoman1]

Wing mirrors are old school, 1950/60s

[@DavidGarcia-pd2gk]

Tiene algo que ver la calidad del vinyl? o esto se podría hacer con cualquier vinyl de cualquier marca y tener un resultado igual de bueno, es más cuestión de práctica y habilidad o tiene mucho que ver la calidad y precio de cada vinyl...

[@syntrexfpv1347]

I feel like I am getting conflicting information between youtube channels. Some say never pre stretch or apply heat till its basically done but ck wraps does great work and pre stretches and heats prior to even applying.

[@ClintonSnow]

Hi, Vinyl Solutions, you did so great on this video the carbon fiber your video is really helpful and we all appreciate your effort to teach us. thanks a lot and keep doing great videos like this.

[@DavidMadeira29]

Clouds of smokes anyone, since Facebook?! 🚬🌀⌚

[@JunliuTPU3177FILM]

Car TPU transparent car coat car color change film Chinese manufacturers Wechat

[@DragoMusivini]

How many feet of vinyl wrap is needed to wrap a 350z spoiler like the Vader 3?

[@sophiam6923]

Better if you stuck it behind the mirror, heated it up and then let it fall over the wing mirror then cut it?

[@dankodasic2203]

how is wrap resistant on the sun?

[@enriquemarin4945]

First off too much vinyl . Second why did you put it on the window. Heat it than take it off hahaha

[@matta6170]

Thanks for the tips i am in the process of doing my mirrors i was having draw back from the vinyl now I understand what needs to happen

[@CarWrapsCasablanca]

Very nice work man , i like your word u say ( you are not superman ,,,, you cant do this on one more try , no body can ) Very true .

[@garyalcorn3831]

I done this first attempt lost my shit ripped it off tossed in the bin wish me luck second attempt

[@anasezzerouali7054]

Hello.. What do I do when I stay under vinyl bubbles

[@guillermojuarez4062]

a) re-wrap if it is like a small piece b) puncture the bubble with a needle, apply heat an press until the bubble and the puncture are gone c) lift the piece and re-apply These are individual options, not a general instructive

[@жекабелый-х5ж]

Piece of shit. Better to use immersion printing. This shit will not for so long.

[@mohdanuaraaziz8054]

Nice job. I'm going to wrap my side mirror. I will follow the steps what i saw in the video. Hope it's will work perfectly.

[@thecurvedr]

carbon is hard to work with because of the pattern, you did an alright job. Pretty sure you can do it in one piece, but who cares if it's 3 pieces. The car isnt being judged and winning 1 piece vinyl awards.

[@troyd-motorsport9933]

So Im no tthe only one who thought It did look like he could have done it in 1 piece

[@miscaccount4760]

Jezuz a lot of hate in the comments.. He can't be too damn bad he's def making his money

[@mirekwieclawski326]

it looks so easy when you are doing it, I think it is great job, will try myself, but start with something easier first, more flat :)

[@stephaniecarder-gallon3489]

T

[@frenchjeeper83]

what a waste of paper!!..not waspe))..i mfrench!

[@cashflow6576]

I could see this would be a clustterr fuck if I tried this

[@Mikemiguel85]

Thank for sharing bro. I been think on wrapping mines CF too but I though it would be to difficult. Now I have an idea how to. Can you do the front bumper. I want to do the middle part instead of painting it like everyone else. Thanks again.

[@daleashworth-brown2062]

That was terrible application.. looks good in the end ... But you could have done that a lot smoother.. and the more you stretch it the weaker it gets

[@CKWraps]

This is like a 6 year old video. Long before most knew how to wrap. Yes, it can be done better.

[@Seeker76543]

I just got the same wrap TODAY from amazon, and looking to wrap my black mirrors also. Glad I subscribed PERFECT TIMING for this to come up for me, THANKS!

[@pinewho]

I still dont agree that u should stretch that piece before u stretch it more when u applied it on mirror....less stretching means less pressure means it will hold better..

[@pinewho]

@Aaron Ferguson same as he did in second part of.video.. I just dont see a reason why would i stretch film before apply it..

[@ericfung3308]

I'm actually surpisred, it's such a good video, great explaining. Thanks!

[@nicknick2117]

Coming here from your (much) later videos, I have to say, this is sooo bad :)

[@CKWraps]

Lol it is

[@robforn9622]

Nice!! Thanks for the vid. It helps me a lot for DIY.

[@010aray]

DIY tip #1: Save a lot of headaches and take the damn mirror off the car first, it's not difficult.

[@ukandrew]

Nice videography, hope mums been receiving her commission…

[@CKWraps]

She gets to live life for free. She raised to children as a single mom and did a hell of a job so the least I could do was make sure she never has to work again.

[@midifire]

Is there a reason you pre-heated? Because it looked a little bit deformed if I'm not mistaken. I guess overall it looks okay

[@lauraholmes9353]

He explained why as he was doing it.

[@JayTheTruth]

damn this is harder than it looks lmfao

[@gamersvictory6261]

You just gave me the cheat code

[@MachineKing]

pretty rough start but good job in the finish

[@bennyblanco4651]

Talk to much crap looks bad job

[@NDBBDB]

Great video, very helpful.

[@deafrich5971]

Wrap master!!

[@AJ6spd]

Will a normal hair dryer work?

[@chynabarnescb]

This man makes me sick, he got me acting like I can do this and he makes it looks so easy. So far I have wrapped my grille and back part of my trunk of my car. Now I have to pray 🙏 for my hood, I think 🤔 somebody needs to call the cops he makes it look so easy he does such a great job.. he has me in love with the v2 wrap I have ordered 3 times

[@Sky1]

Tell me about your heat gun. Can I use a blow dryer or if I get a heat gun what temp do I need?

[@thebardock6785]

I had no idea about post heating

[@ChrisBeatsRecords]

Waste of vinyl but good looking outcome :)

[@OatesSteve]

To wrap my spoiler & my side View mirrors can you suggest where to purchase the squeegee and what size I should get, Do you suggest 3-D, 4d, 7d ? ,, What is the best rap to buy for outside the car? Any hints what brands are the best quality? Thank you for the video I’m sure it will help when I do this project. Steve

[@ericd.4253]

Thank God for KZbin I was trying to replace my new cap with the imitation carbon fiber cap I'll take my time and do this

[@Retrocoleccionista007]

4 horas para un puto espejo jajajajja

[@nzpyr55]

Clean, nice & detailed work! TY

[@zygelio1568]

Wtf are you doing?

[@jarosawmizga1161]

16:05 can see line where carbon has damaged

[@valmiralimi9165]

Hello your video is perfekt but can i know why my vinyl in 1 Week on the sides it is detached i musst to do more with the phone? or what Thank you very much :)

[@frenchjeeper83]

what a waspe of paper,,

[@D1G1TALSYNAPS3]

Fast forward eight years, you are now able to do it in one piece. You have come such a long way. I still suck, but you are almost God level.

[@doyleredwine1683]

what happened to this vid? says unavailable

[@Selrisitai]

Still works for me.

[@professor_meowington]

Anybody care to explain why one should wrap the mirrors instead of just using plasti-dip? Feel like it's much easier to get a good result, and less work? Maybe also cheaper?

[@SimiTravels]

at begin i thought it won't come any good.. i was wrong , actually a good job

[@russellsitaro8505]

Hi Chris I’m getting ready to do a carbon fiber wrap on my motorcycle gas tank. It doesn’t have any hard edges. Pretty much a teardrop shape. Should I pre stretch like you did on this mirror. By the way this will be my first attempt at wrapping. It’s Avery SW900

[@joka69ify]

Surely stretching the carbon look wrap will distort the carbon effect?

[@SuperMaxibaby]

i dont think u realise how talented these guys are until you try it yourself, several attempts and still cant get anywhere near getting a result

[@bbnine6407]

Fight the vinyl 101

[@JhonnyTube]

Good video! I'm planning on doing the mirrors on mg car but they have the integrated turning signals. Any tips?

[@Roadsurfer2k11]

Black streak on corner from stretching.. used the same material last week and got the same mark. Lifting up the vinyl to get wrinkles out cause it

[@asyrafasyraf6923]

thank you so much for all your tips.. its help me so much... btw im from malaysia.....

[@williambresinski6706]

What kind of prep would you do to a plastic mirror before you wrap it? This wizardry that you show us has inspired me to try this on my Mustang👍

[@sydneyadams4356]

I think if you have cut it smaller, you wouldn't have struggled 🤔🫣

[@Ducksnuget]

So you're going to stretch a patterned vinyl with heat and then shrink vinyl with heat. What part of that makes sense?

[@SS-qn8tb]

in your professional opinion...what would be the best way to prep cracked interior trim before wrapping with this product?

[@ad.8928]

hey bud I have a wrap shop and if you wanted to do the mirror on the car instead of the pre stretch on the window heat the whole piece and stretch around the mirror... then heat again and let it relax around the grove. just fyi for next time ... also you wont pick up debris from the window you had it on

[@TheChromeCannon]

Know having extra material is needed but seems like this much extra is wasteful? Turned out great ether way love the Vids and explanations. Helps huge

[@loganm9784]

I tired doing my mirror and it went pretty well but I had a lot of wrinkles around half the mirror, for a first attempt it wasn't bad but I wasn't happy with it and pulled it off, I think I need to prestretch like you showed and it would be perfect

[@andresposada3648]

que buenos vídeos. el color de tu carro es el quiero utilizar en el mío, cuanto vinilo necesitaré? yo tengo un nissan patrol y61 tres puertas. yo quiero intentar ponerlo ya que en mi país es muy costoso contratar ese servicio y no quiero que me falte material. muchas gracias.

[@timothyrico4079]

Have you ever wrap the inside of a car if so can you upload a video of that for your followers to watch