POV Gloss Carbon Fiber Interior Wrap - How to wrap your interior Tesla Model 3

Material used: amzn.to/2CUisnw
More training: www.vinylwrapt...
My Favorite tools and accessories I use at my shop:
Heat Gun (Instant heat, no waiting) - amzn.to/3WWHmNC
3 Pack Squeegees (soft, medium, hard) - amzn.to/450sOP2
Wrap Gloves - amzn.to/4aDRAWt
Knife (Have not found anything better) - amzn.to/3KghNj8
Hex Garage Lights (perfect temp for detailing and wrapping) - amzn.to/3wPlut1
Rolling Bench Stool - amzn.to/3UZO1Ej
Tool Cart - amzn.to/44X3nxT
Scratch-safe Ladder - amzn.to/4aDaAEn
Headlight Tint (I put that %^#-$ on everything) - amzn.to/4bYoMZB
Knifeless Tape - amzn.to/3Vg46XK
Wrap Sticks - amzn.to/3wZK1eM
Magnets - amzn.to/44X3cCF
In this video I show you what a pre cut kit looks like vs what it looks like when you "bulk" install an interior wrap on a Tesla Model 3. I'm using Vvivid Epoxy carbon fiber which is the most realistic interior carbon fiber available.
For exclusive content in 4k video visit ckwraps.com and sign up as a premium member
Get Vvivid Epoxy carbon fiber here
amzn.to/2CUisnw
Certified Training visit www.vinylwrapt...
Email [e-mail] to save 20% on your Hexis or Vvivid vinyl order

[@CKWraps]

For exclusive content in 4k video visit ckwraps.com and sign up as a premium member

[@DeanF]

Thanks for this! I have wrapped a few things, and always learning!

[@Dorklord444]

Hey Christian, do you know of a an exterior vinyl wrap that looks the same or similar to this VViVID vinyl wrap?

[@omeroguzman6935]

Ck wraps i was nervous doing my own wraps to my genesis but thanks to your videos i gain alot of confidence thanks bro amazing wraps you do.!

[@adengbuhaybukidinAustralia]

I want to use gloss woodgrain pvc wrap on my gen 4 Mitsubishi Pajero console, is using a heat gun necessary or just plastic spreader?

[@CRXUGLYKID]

Just needs the fro!Great work

[@15DurangoRT]

This is what you can do when you have years of practice. The secret to wrapping is patience. This guy does phenomenal work!

[@Chris_Wolfgram]

Yes he does ! Id pay just about anything he asked, to do my interior.... But 3000 miles is just a bit too far for me. Even in my Prius, that would $600 in gas....

[@drdanbhcmg]

I love it when a Craftsman make his work look easy!!!

[@LB20278]

I started watching your videos because I wanted to know how to apply a small bit of wrap to a specific area. Now, I keep coming back to watch a master at work...and to listen to a great teacher.

[@bridgendesar]

Awesome, when you've finiished the video, you should say "and that's a wrap!"

[@c.amoroso]

That’s too corny

[@nikolesmith1307]

Been helping my husband's wrap the interior of our vehicles for the past 3+ yrs. They only reason & time we redo it, is when we want a change up the look. We are working teaching our daughter so she can do her own look in her vehicle in the next couple of years. **Chris, Doing amazing work as always, on doing your trait as well as teaching it, keep it up!

[@silverback2773]

Man doing work for free is unheard of, you really seem to be a super cool guy. Know the vid is old but still super useful information. Just recently wrapped my hood, took like 4 hours but I really took my time to make sure it was done right and was my first time wrapping anything. You are fuckin awesome dude. Keep up all the good work.

[@Staykool777]

THIS DUDE IS AN ARTIST! Don't get it twisted.

[@benrobinson7676]

I think it’s safe to say you’re the Bob Ross of the wrapping world 😂

[@omartellez1446]

I was literally thinking the same

[@YusufPetersenCPT]

Look at all those happy cuts...

[@rotrmotr]

Ben Robinson hey I was going to say the same thing! His voice is soothing. I would be nervous as hell doing what he is doing.

[@colemartin8796]

I mean he wrapped a completely flat, very simple piece, lets be real

[@GFXKraVe]

Have you watched Yiannimize?

[@larzDJ]

That is by far the best carbon fiber wrap I have ever seen!

[@Alternabear]

Amazing. I am about to wrap console and dash trim panels in my Volvo XC90 and I was worried about the fussy panels that aren't removable. This showed me everything I need to know, step-by-step.

[@cherri2665]

I’m about to do my Volvo s60😄

[@DistractedKat]

This tutorial was fantastic! Unfortunately, it made me a little over confident in my ability because you made it look so easy…not perfect, but I know I did MUCH better at installing my vinyl all thanks to you. Seriously, great technique. Thanks for sharing!

[@Pboy7272]

All of the piano black interior pieces of the world just made a collective GASP!!!

[@MichaelFarrell2]

Great video, you made it look so easy. Well it's definitely easier then the pre-cut and not having to line up the holes and edges. Good job. I will be ordering today.

[@joea1746]

You make it look easy. I did my W212 E400 center console and like you I did each lid separately. I used the same gloss fiber interior wrap but removed the side trim piece of the center console. This allowed me to have better access side of lid trim. My biggest issue was trying to get the side edges to stick.

[@nomo4u886]

Damn this will make any car look so much more unique it’s dope af & stands out from the crowd.

[@urgoodfriend7510]

love the way he pays attention to details by aligning the carbon trails.

[@Jesko_VRS]

Quality vinyl, mad skills, patience of a monk = good results.

[@texasslingleadsomtingwong8751]

Wow , that car should have came with the wrap you put in . It's so good that it looks factory perfect and blends correctly . I'm impressed.

[@douglasgarcia8577]

Watching this video was like watching Bob Ross doing his paintings.... Very calming voice as you show us your amazing work!!! Great Job!!

[@mattb12341]

Man one of your biggest fans I can watch your videos all day. Great teacher to. Hopefully can be good like you one day.

[@offdabeatz]

Quick tip. If you can remove the pieces applying the vinyl to I highly recommend. The faces of that area with proper tools take a bout 10 mins to remove and save a whole lot of worry about cutting vehicle or vinyl wrong.

[@mikex1384]

"This is the part that makes people nervous." You got that right! The thought of having to drag that blade straight along that edge would freak me out.

[@JD-wm4uv]

I wonder how much practice this guy has has . You can tell he does this alot all the tools techniques everything is just makes it look easy and quick as he applied with steady hands

[@nullwii]

This is exactly the video I needed this week

[@blackredzie]

Thanx for the video. I learn to do better wrapping from all your videos. Nice interior wrapping without removing the console.

[@selcouthmesonoxian3143]

"I'm really good with my fingers." Instantly went to comment section

[@bobrick8176]

Same

[@TechGodI-AM-THE-GREATEST]

Sameeee bruh Lmaoo

[@pims8797]

Same

[@burdogman8839]

HAHAH same

[@Mskiwi4844]

Meeeee toooooo 😂😂

[@RG-sk8cc]

why would anyone give you a thumbs down? great job and easy to follow along. can't wait to try my hand at this on 2020 dodge challenger scatpack

[@scottgillig908]

The carbon fiber vinyl you're using makes that console look totally bad ass.

[@e36fanatics]

i disagree heavily... it makes it look cheap to anyone who knows what real carbon pieces look like not to mention how overdone this whole carbon wraps have become its actually more unique not to have one

[@drunken13astard]

@@e36fanatics If that piano black is heavily scratched, it may be an improvement. I agree tho, nothing beats the real thing.

[@DrWarcloud36]

@@e36fanatics i tend to agree with you. I have an infiniti g37 and its like everyone and their mother wraps the interior in carbon vinyl.. i hate the brushed aluminium in my interior but i dont want the carbon wrap either. Think i may just drop a few hunded $ and go with the wood grain conversion

[@Unknown-qs2wu]

@@e36fanatics chin up

[@kylephillips8780]

Wooooww the cup holder came out great 👍🏾.. I love the close up camera

[@jordancerace9310]

Oddly satisfying watching this. Gonna do carbon fiber on my dash soon

[@shanekemp4093]

This is the exact video I needed to see. I've been watching your videos for a couple of months now. I want to get into the wrapping business and I started my first project with my own interior in carbon and it was very difficult to use probably not the best first material to use or the fact it was labeled as 3m which it wasnt, and the material wasn't the best. But the second job I did was on my friends BMW 3 series and it came out wonderful. But I did find wrapping the corners difficult but now I see where I went wrong thanks bro love the videos and love the work, I hope to get on that level one day big ups 👍

[@djrichsaracino2554]

Amazing work, to think COVID-19 lock down got me here :-) The power of endless youtube videos.

[@roamizane1484]

Thumbs down for what? Nice job CK, you always move like a surgeon with the blade.

[@MrXispas]

Great vid's. I was doing something like that in 1997 in my car.....101% of people said i was crazy, using an hair dryer for a heat gun......Now i know i was right...., never to late to start again!

[@bfunkydunk]

You give me the confidence to wrap my own car and interior!

[@BaldEagle11100]

And thats the Mac Daddy of the wrapping world right there ! Come to the UK - please.

[@davidhaddox6492]

Literally learning this to make this f150 i bought a easy flip lol i appreciate your handy work and detailed tips and instructions

[@chinito20fam]

so aver doing my fromt grill and mirriors and now going for the big boy. which is wrapping a car. glad you still habe this up. going to redo the inside. makes things so simple. buy thanks again. great stuff.

[@th3suffering]

As the owner of a Model 3 that did this wrap recently, a word of warning. The piano black is itself a wrap of sorts. Use caution when removing the wrap. I had just about completed the cupholder portion when i was a little too careless with the knife and had to start over. So i give the wrap (unheated) a good yank to start over because im a moron. It took the wrap off, right along with the piano black below it and i was left with the ABS. If i ever unwrap ill need to replace this piece from ebay now.

[@michaeltlays1293]

Watching these is kinda therapeutic ☺️

[@AlphaHarmonious]

Wow. This gentleman was extremely professional and did one h^** of a job. -Harmonious

[@nightynine4061]

I really like your videos. I am happy that this vinyl stuff is not destructive on your surface if you fail. It's not like glue and it's cheap too. I am going to start practicing on small surfaces on my car. I got an old Honda Civic I will not sell and will be driving it into the ground.

[@vidi3872]

Laid this wrap down on the scoop of my WRX (2 WRX so far), and its holding up fine, 1 year so far. Had no idea its interior only. The adhesive on this wrap was super strong, made it tough to manage

[@latenight30i]

what’s the wrap called? where can i find it

[@rbmwiv]

I have been using a salon quality hair drier for doing vynal. It gets it hot enough to stretch and you will never over heat it. I happened to get one in a parts car I bought and I use it on stuff like that and if I gotta break out the heat gun then I do. Great work.

[@teddym2808]

Wow it actually looks so much better

[@J-luna]

I envy very talented craftsmen. Very good job.

[@grantroberts4231]

would have enjoyed more of a reveal shot of the whole project after it was finished. the 2 seconds at the end left me wanting more.

[@andrewrandolph9559]

HE GOT THE HAND OF A SURGEON REAL TALK THATS THE PERSON U WANT TO HIRE REAL TAL;K

[@williamsokoloskiwilliamsok9544]

Thanks!

[@XboxNationCanada]

Product looks amazing. Great job as usual. Looks so much better than the precut material that was on there before

[@juannavarrete3990]

You should do radio. The Bob Ross of wrapping. Thanks for the great content 💯

[@rasheedmuhammed1073]

I have tried this in my car, and removed it after 3 months. Reason, i usually park my vehicle in 🌞 and when interior gets heated and some dust gets in the edges these sticker films edges gets out of the body where its applied and will looks very bad. Then after a lot of consulation from auto experts i tried hydrographics in my dashboard and now its comparable to ferrari interior. Go for carbon fibre design in hydrographics water dipping. All those approved providers are offering life time guarantee. It will cost as like this square inch /$ . Hope this may help you car lovers. Any way the wrapping seen this video is of extreme quality. Great job♥️

[@peters9869]

You just fixed Tesla’s fit n finish issues. Looks awesome. Cheers my friend

[@ricoshay1172]

Could watch this guy wrap anything..great instruction..first attempt coming this weekend!

[@MrLeroyJacob]

shout out to your freehand skills!!! and yes you are Bob Ross!!!

[@masquedebe713]

Excellent technique. Your expertise is what I’m trying to emulate.

[@bsams3827]

Snap on makes a really good light that hooks across the headliner for more light inside. Its even cordless/rechargeable. I use mine for more under hood apps but for you it would really light up those dark areas.

[@bsams3827]

heres a link if interested:shop.snapon.com/product/Flashlights/14.4-V-MicroLithium-90-LED-Cordless-Underhood-Light%2C-Red/CTLUH761

[@stulogic]

Good job Christian, the Vvivid carbon is so nice to use - looks amazing around the cupholders.

[@unadomandaperte]

rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=143416520322&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111

[@Blokkie]

Just discovered this channel. Im already a huge fan. Was looking for some inspiration and guidance. I’m starting my first wrap project ever. I want to wrap my Fiat Panda (sport) in glossy red vinyl. Just ordered everything and will see how it goes. Man you’re channeling is useful and nice to watch 😊

[@consumerthis3169]

It’s intimidating, but the more you watch these videos the more I work up the nerve to do it; worse case I’m out $20 for some vinyl

[@davidnorthover2812]

Hands of a surgeon

[@KevinAClassA]

WOW !! Perfection and steady hands at there finest.. Great job brother Stay safe

[@kanatanagesaeiji]

You: I’m really good with my fingers Girls: 😳

[@shubham-------]

lol😂😂😂

[@lovegenerator7617]

Im extremely good with my tongue and lips, girls and women

[@ciair7]

@@lovegenerator7617 no one interessed 👌

[@slushy0022]

Kind of funny your commenting on a “lady” pov lmfaoooo and no other lady commented that 💀 💀

[@ciair7]

@@slushy0022 this kind of people are always poor in this life 😉

[@madebyscratch]

Brandon needs a flashlight.. haha.. You make everything you wrap look so easy...

[@MuscleTile]

This is as satisfying and relaxing as watching Bob Ross' painting videos.

[@johnboy5632]

😂 true

[@magnificent10304]

Man u make it look easy. I think I'm going to wrap my car watching your videos. I used the CF wrap u suggested here on my vents an it looks very good. I need a portable heat gun cuz I don't have a garage and couldn't heat an tuck some areas that needed it. Practice makes perfect. I really want to wrap my car

[@americosupply]

Thank you , I know this is an older post but it really helped me . Great job !!👍

[@BowsettesFury]

Wow that vinyl behaves so well compared to the crap I’ve seen and used. Looks amazing installed.

[@Wightzebra]

I binge watch your videos like I watch a series like Sons of Anarchy.

[@onerichartist]

Stellar vid brother. Great voice, great camera angles. Thanks for posting.

[@bagrbuckcustomhydrographic5697]

Final product looks great guys!

[@rayban8680]

This dude has mad skills. Was thinking of wrapping my side view mirrors but after watching I think I’ll pay to have it done.

[@lummy321]

Perfection as always brother ... Brendan does need a light though for the darker areas ... Phenomenal work as usual Christian bro . Peace 🙏🏁

[@CKWraps]

We'll get another light. Can't have too many lights

[@thuggy67]

@@CKWraps shouldn't you spray a water proof something on it after ?

[@younggod619]

@@thuggy67 you mean a wrap protection ? It’s like interior protection they spray so it doesn’t get dirty or sum shit like that lmao

[@thuggy67]

@@younggod619 lol ohh sorry I'm not that well knowledgeable about cars and so

[@MA-bq8yg]

WoW 🤩 so beautiful. It appears so easy when you do the covering.

[@DVTOM]

How much would have you charged for doing that normally? I'm learning a lot from your vids! Thank you!

[@andylane1968]

Wow so informative Chris, great pov camera work thanks so much for the information on how it's all done.

[@walkingthedistance]

That's some quality wrap there!

[@patrickthompson1190]

"I'm really good with my fingers" - CKWraps 2019

[@altraigovender5900]

Hehehehhe

[@CKWraps]

😂 😂 😂

[@michaeloubre8255]

Had this vid playing in the background at work, and when he said this, it made me spit coffee everywhere

[@thegamingturtle9553]

Thats what she said

[@Kittypopvegas]

Lmao

[@marshallcolin71]

Can't wait to try this on my car. Great video quality, and immaculate job.

[@cobaltuniversedotnet]

I will admit I still use the old school 3m Di-Noc, but this looks really good.

[@biaggi150]

Woah! That piece around the cup holders made me nervous, amazing job man! 👏

[@migdi242424]

That was quite therapeutic.. Great job.

[@Stizy]

this was an insanely high quality video thank you

[@julianbell9586]

Amazing video. Such detailed work and precision. I like the two fingered control of the blade and delicate use of heat gun. Love the tips (careful where you put the heat gun, always retract your blade... I typically create jobs much bigger by mistakes unrelated to the job itself!). Video was good but camera man can lock off focus to the point he wants by tapping lock on the screen). I now have confidence on wrapping my BMW z4 without having to remove the dash trims. Excellent video and job. Thank you 👍

[@vasylgrygoriv4155]

Nice job

[@tonybyfield2173]

Brilliant job Christian.

[@swndle1]

Great Finished product love the tips and pointers to attain a better finished product, Awesome how you make it look so easy ‼️

[@unadomandaperte]

rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=143416520322&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111

[@AshwinLB]

Bought this carbon fibre wrap to cover the grey poplar trim in my 135i! I’m hyped!

[@CaliXJ96]

AshwinLB same here, how did yours come out?

[@AshwinLB]

SoCalXJ really good! I just took my time with it and used heat for all the curves and stretched hard so it wouldn’t wrinkle

[@davidgonzalezsrt4]

I love your channel and has really pushed me to wrap , with knowledge of your videos !

[@robqcmccullum8797]

Nice work, I hope you don't mind me making a suggestion but can you add a little more light, maybe investing in a LED that you can strap on your head or safety glasses with LED

[@TravisInCanada1]

I want to say "friggin mint" is a Canadian thing LOL! Nicely done Christian.

[@VenusianSanctuary]

Travis In Canada also very British too 😁🇬🇧

[@rsx2k2]

For example @ 22:45 when u made that cut. You can use that built in cutter on that vivid blade.

[@JeffDavis_is_JeffDavis]

@ckwraps The screen is super easy to remove. I've wrapped the back of my screen as well, for a really clean and blended look.

[@amandasaurusrex23]

Wrap Daddy 😍😍💋 I love your precision and patience

[@TurboJohn74]

Unintentional asmr wrap

[@trilla252]

Dude...I swear...you make it look so damn easy.....lol.

[@edgarluna2327]

I'm definitely doing this to my car. Great Video!

[@thomasanderson3667]

You make it look so easy

[@Nfamus_Kiwi]

Looks good dude. But personally I would have tried to do it in 1 piece. When you use many cut pieces you can get the pattern going in the same direction but you can't get a uniform pattern alignment that matches perfectly between each section of console.