Clamp Truck Class

Clamp Truck training video.

[@thedcfamily507]

I lied on my resume saying I know how to drive this equipment got the job starting Monday n I’m excited bc this really helped me learn all the controls n I know how to drive a car so I’m sure it’s easy

[@gratus0824]

😂😂😂

[@playboi_riq]

How did it work out bro?

[@localpizza.]

did you pass

[@MrTrashcan420]

So are you still there today 😂😂

[@nathanstark1151]

I did the same thing lol I’ve driven one a couple times but that’s it it’s easy

[@alexanderpapii4866]

Basically if you can operate a regular forklift, you can operate this👌🏻

[@Mushroom.Madness.]

Just the fourth lever, there's a lot of different style fork trucks with a fourth lever. Pretty cool though I was just here trying to figure out what they meant by "clamp truck" can't say I've seen these anywhere I've ever worked.

[@terrancescott430]

Not really totally different from operation a forklift.

[@Darealspill912]

Not the same 😂 if you had a loaded truck and you go in fork first you gone have a problem 😂😂😂

[@raymundorubio2375]

Yes and No cause a forklift forks are used and on a Clamp there are Blades in which there are certain differences in carrying a load and or Stacking different from a Sit-down Forklifts I drive both machines for over 12+ years and I've seen everything about these to machines

[@natelocc4655]

thank you bro I gotta job coming up I do the regular lifts I've done the stand up clamp

[@ranettajohnson696]

Thanks I've been doing production work since I was 19, and I am now 30 and you helped me get my first forklift position. 😁😁😁

[@jessieurgea9899]

Hi what type of lift did you have your test on clamp/sitdown??

[@ranettajohnson696]

@@jessieurgea9899 It’s a Crown clamp stand up.

[@Koolys7only]

sameeee

[@MeShellTiel]

I have a test to take tomorrow and this was a great crash course. Thank you!

[@josemendoza100045]

Same

[@Marcus96s]

Same 😂

[@casinofrinak5712]

À

[@planejadded5981]

Same

[@EdenFL97]

If you can drive a car you ca drive a lift! just remember to always look around you and handle the product with care!

[@madmike3636]

Thank you for making this "how to.." on these forklifts. Ready to take my classes and a lot more relaxed thanks to this. Keep up the great work brotha

[@badmf9184]

You did a damn good job on explaining the clamp I start my new clamp job on Wednesday October 4th thanks 👍🏿👍🏿

[@logostown6472]

Thanks man I thought it be harder than sit down forklift

[@caleb9922]

Me too

[@jamellancaster3429]

Very good class instructor... well explained.

[@MrPaul-vy3lq]

Very good and well done. Informative. I do wish you would have shown me how....to pick up different things...and how far up or low does the clamp need to be on the item of freight ??

[@pervisbing4390]

Awesome video👍🏽

[@TheAngryHippie]

Very concise and well paced. Thank you.

[@dflowfamily]

Super instructuve class and thank you

[@danieldevries3230]

Disagree with lights always being on. On for trailers. Off in warehouse. Lights can create a hazard for oncoming people or operators.

[@ltsstticom4106]

What lol the lights on forklift use for halos in the warehouse for pedestrians in to allow other forklift to see in a distribution center I can tell you crash lol I’m a operator 7 yrs strong

[@alexanderpapii4866]

True

[@vj3137]

You would hate my workplace, then. Forklift lights have to be on at all times.

[@lindseypelehowski3049]

every company i’ve worked for makes you keep them on at all times in case power or lights or something go out

[@bikindimodeste]

Nice for us brother thx for your explanation ❤❤

[@stefanodowling1097]

He went on the wrong side of the forklift. He went over the controls. Instead of going in the other side meaning he would not have touched the controls . Health and safter

[@rcproductions901]

Can you guys upload every Daily and I love your channel and Videos

[@MultimediaJay]

My facility's maintenance guys would be freaking out because they'd think you were scratching the floor moving the clamps with the tilt pointing down. 🙂

[@VHM79]

30 minutes later after the stupid checklist you are ready for your first break. 😂

[@bigdogboss7133]

Pure awesome

[@pierrefrandy6799]

Good job thank you

[@gabrielle8612]

How do you know when your load is secure

[@surakaabudu4445]

Nice video thanks

[@edjohnson7614]

Do you always travel with your clamps behind you even if you dont have a load?

[@johncruz1979]

What type if crown model is that?

[@hamidboutriq1529]

vers interesting my freind. good luck.

[@davidlatino8986]

Where can I apply for a certification in Los Angeles or school

[@edwardaidoo1406]

Good job, plz am forklift operator how can help me to know more

[@jorgeastrain701]

I got a job interview for this truck coming up an I’ve never heard it been called a clamp truck lol I’ve always heard it been called a squeeze truck but nonetheless very insightful!! Hope I pass

[@TechOut]

4 points of contact is not physically possible it’s 3 points…. You have 2 hands and 2 feet you have to lift a foot to get on

[@asiaticoasis]

😅😅😅

[@randya9320]

Where is your Clamp open Guard system button located?

[@ladibrar4204]

Thank you brother

[@user-kq6yz8wx6g]

Thank you

[@lawrencedaligdigsr845]

I thought it has a rotating controls for grablift

[@TKommandant]

That looks very old we only have Trucks with Joysticks

[@Maine2point0]

How to insert the key back in

[@Ipunk7474]

I usually work with forklift clamp like that,and I need a job,please give me a job I'M from indonesia

[@ojekolaadekunle9445]

Pls were can I get a physical tranning?

[@josesalazar4521]

Thinking of the boxes,😁

[@merazmahmud134]

nice

[@factzmediaglobal]

AT 6:50 ELECTRIC PALLET JACKS NOT TRAVELING AT A SAFE DISTANCE OF 3 PIT LENGTHS ... IJS

[@petefaiers1836]

Would have failed a test in the UK. Got into the truck on the wrong side (over the controls!!). Then took the parking brake off and operated the hydraulic controls several times..naughty naughty Mario.

[@gratus0824]

😂😂😂🤦‍♂️

[@ericspencer256]

Good point

[@DweepAndDestwoy]

ive used this on ice cream buckets lolololol

[@smooth1234ish]

I guess you no longer work there.?

[@gratus0824]

Sheesh

[@MdShahin-bm4mt]

Exprence 10 years, lm shahin alom

[@jattajatta4105]

Hi how you doing I’m very very interested for the class ❤ i’m looking for someone who can trade me for this class

[@r.d.9399]

Hilarious that using these requires a certification like it's rocket science. For the pay it's not worth the time

[@ismaeljrmorales3613]

Definitely worth the pay, got certified and I'm making 21.50 an hour while guy with no certification is making 15.00 an hour

[@MrMtz817]

Place I'm applying at pays 24$ with experience!!

[@daleyzaacosta5399]

Es easy

[@qzorn4440]

a lot of your safety training feedback is how beat up the fork or clamp truck is. 🧐 there are 2-3 months old new trucks looking like junk trucks. 🥴 a good driver makes all the difference

[@RayRaySnow]

Just hate these fucking things, give me the high lo with regular forks man

[@diegotorres1194]

Same lmaooo

[@Mikehawk323]

Why bro

[@crazypope]

That lift is junk

[@ahmetyavuz1223]

You got on the forklift the wrong way you should never get on the side where the levers are, also the way you have parked you hoist the forks need to be tip down touching the floor.

[@Lemon83166]

This place needs a new safety rep imo

[@baole4006]

Piece of cake