You forgot to mention the "element ID". On larger projects Revit sometimes wont show you the conflict when you ask it to. If you copy and past the 'Element ID' from the clash report into "MANAGE > INQUIRY > Select by ID" Revit will take you right to the element in queston.
@mazintawfeeq20163 жыл бұрын
You deserve way more likes on your tutorials! Amazing content as usual 👍🏻
@zabighouri25634 жыл бұрын
Brother u r great I learned alot from ur videos...u also helped me in revesion of the revit software.Thank you
@_savvy_99023 жыл бұрын
This tutorial has helped me a lot understand this subject. Thank you so much!
@beneveritt27204 жыл бұрын
If its not already answered, revit doesn't recognise fabricated elements in steel beams in its clash detection. You would need to use navisworks to detect those clashes.
@rafimohamed99212 жыл бұрын
I think the clash is still active because it is not allowed to penetrate any structure because it will degrease the strength of that particular beam. We need to provide some kind of stiffeners or additional plate welded to that particular area to fix the issues with stress. Stress calculation should be done - Correct ? As you said, Autodesk should give a better solution.😀
@triamberonilla2427 Жыл бұрын
This is exactly what I was thinking. In actual practice, the duct would have to adjust and not hit a structural beam/column since structural engineers would not allow wholes or punctures through those members. However, autodesk should create a better prompt for this kind of issue.
@karthi80in6 ай бұрын
Hi, The Opening in Structural steel beam is the main interference., We should provide the pipe either below the steel beam. We should not provide the Opening in Main structures such as Beams, Columns.
@alexeiciuchin3 жыл бұрын
11:10 Just press "Refresh" on the bottom of Interference Report and it will disappear from the issue list :)
@alvianbayup27504 жыл бұрын
Definitely like tekla software? That's insane 👍👍
@narendradhankarghare87114 жыл бұрын
While designing and construction, the bars cannot pass through such steel I beam as it would make the beam weak at section. Hence the clash is detected. Though, the bar can be welded at surface.
@KOWSHIKROY4 жыл бұрын
great to know!!!
@thebi0hazard3 жыл бұрын
Браво , Колега 🙄
@kennycastro45293 жыл бұрын
Great video!
@boakainsheriff5414 жыл бұрын
Great it is so helpful!!!
@wahidullahparwanayuqob39104 жыл бұрын
The nice one.
@96ELPANDA4 жыл бұрын
You saved my life with this!
@usd7419 күн бұрын
😍😍
@mariepindstruplinde16714 жыл бұрын
I work the HVAC side of this, and openings have always been an issue. There are add ons to help with making the openings, but only paid add ons.
@mohamedelabasery4754 жыл бұрын
how much sir ?
@1511darko4 жыл бұрын
Pozz, jel ima neka opcija da đojnamo vertikalne stupove i zidove jednim klikom!? Imam veliki zgradu i to dosta dugo traje! Hvala unaprijed! 😁
@simhedzzmd98904 жыл бұрын
Great good job
@1511darko4 жыл бұрын
Jel postoji koji tutorial kako napraviti izvjestaj pada tlaka u instalaciji vode ili slicno!? Kupio bih ako ima?!
@SonuKumar-rg1wl4 жыл бұрын
hi balkan great job. you can add coaming for penetration area
@davidlee-zw8rf2 жыл бұрын
just a thought, would cutting holes in Steel beams compromise the structural integrity of the beam?
@ArchiEngg9 ай бұрын
Yes
@bowl4u Жыл бұрын
Does that last example (duct running through structure, with opening created) also show as interference, when a duct is running through an open-web bar joist?
@akalanka763 жыл бұрын
Hi I have generated the energy analysis model in Revit but it is not open in insight please advise me how to open it in insight
@pault2072 жыл бұрын
Great video. Another issue I found when using clashes is that it doesn't take into account phases. You can have a wall set to be demo and still will clash with the new stuff. I could not figure out a solution for that either.
@spacearchitecture3606 Жыл бұрын
It's a joke right, doesn't care about phases, gosh
@deesesarte4 жыл бұрын
How do you solve the plumbing clash? When you use join I think it has to be the same material, isn't it?
@lailalmuharromi64803 жыл бұрын
what the difference between naviswork detection clash? cause my friends said that clash detection only can be running on naviswork.
@rauldelarosa56806 ай бұрын
Is this will work also for the imported files like DWG or IFC?
@בניא4 жыл бұрын
Hi there, tanx for the gra8 tutorials. Maybe the resion to the clash show, That ull always be aware to a cut in a beam so that there will not going to be a stractural failier at site. Jast a theaori.
@MohitKumar-sr2zq4 жыл бұрын
Hello sir I want to know how can i apply family to the roof. when i try it will show on bottom of the house in the roof. how can i apply correctly
@AussieBIMGuru4 жыл бұрын
Try building a face hosted family.
@mae23094 жыл бұрын
I want to be a patreon.. would I get more access to your courses.?? I def need to learn revit... cheers.
@balkanarchitect4 жыл бұрын
If you sign up for the advanced courses tier you will get access to over 44h of advanced courses