Clean Rusty Tools with Simple Pantry Item

[@mikealt7]

Thanks! My tools are rust-free and they taste much better now!

[@seejanedrill]

lol

[@shumeister1059]

what kind of oil did you drizzle it with?

[@boxsterman77]

Yuck! I hate the taste of molasses. I'm just going to keep my tools in the solution until I have some nice rum.

[@trailhopper883]

🤣

[@LFOVCF]

Lady, you got some skills, and I'm humbled to say you are teaching me some great tips! Molasses is better for the environment than chemicals, even if it takes a week or two.

[@hamlettelmah441]

@robert retka What if "urine" a lot of trouble already because someone saw you peeing on the stuff, how do you clean that mess up? Jk, jk. ✌😋

[@lucasbiaggini]

Have you ever visited sugar cane plantation? Quite sure a simple caustic solution is way less damaging to the environment.

[@jimwatchyyc]

Lucas Barbosa Interesting, I didn’t know that, will look into this.

[@signore1043]

Have you ever thought of publishing a book containing all your "tricks"? It would be great to have handy and portable access to this information (beyond an Ipad device). Even a handy table of subjects would be helpful. The only problem would be the reader would miss out on your style of presentation which is enthusiastic and smart.

[@seejanedrill]

+Richard Signore thanks, Richard, we are definitely considering writing a book...thanks for the compliment!

[@wanderingangelstudio1359]

I'd buy that book!

[@brentstephens4081]

I'm in australia... but I'd order your book too :)

[@flatbedladyv2191]

She needs a TV show!!!!

[@-Diana469]

seejanedrill I would definitely buy that book!

[@artgordon319]

Leah, the way you explain things makes learning a joy. Thank you!

[@georgevalencia1713]

I'm learning a lot from you, sweet lady. I thank you. In case your wondering? I'm building my own house. Thanks to you It's coming along real good. Again thanks for your professionalism and all those great tips. Bless You Jane.

[@seejanedrill]

George Valencia thanks, George. And good luck with your house. Keep me posted on how it's coming along.

[@georgevalencia1713]

I will Jane. Have a fantastic Day....

[@wendyfahmie7608]

This is a great idea! I got an idea from someone else for keeping lawn tools in good shape. You fill a 5 gallon bucket 2/3 full if sand and mix in a bottle of mineral oil. Put the shovels, picks, etc. into the sand. You just store them in there - the sand works as an abrasive and the oil keeps the tools from rusting!

[@seejanedrill]

thanks, Wendy!

[@you2tooyou2too]

I hope the petroleum fumes in your storage shed are not ignitable by your electric tool motors.

[@samsmith6169]

Old motor oil from an oil change (car or lawn mower) works too. No fumes.

[@stephk5255]

Leah is like a great friend sharing experience and knowledge to help me become better without being condescending to beginners like me at all. Truly a wonderful lady that I enjoy watching!

[@seejanedrill]

thank you, Steph!

[@bruce-le-smith]

you rock Leah, can't get enough of your vids. Beautiful hands also!

[@ReadTheBible8]

Your videos are the best. No obnoxious music good English no asking for likes and to subscribe. Now this is my favorite channel. Thanks again.

[@dimefever1006]

I was a science geek growing up, this is like Bill Nye of construction! Thanks so much for sharing!

[@larrybeck3857]

Yup and then some

[@rustyrebar9647]

Yes, she is awesome, but don't insult her .Bill Nye is a hack!!

[@melfreitas1290]

Bill Nye fake scientist

[@mrpalindrome3067]

Alright Leah. You had my subscriptions, my likes, and views on youtube before, but this old thing from 2015 earned you my deepest respects.

[@ep7672]

Your delivery is on point. You are a true teacher. Thanks for doing so much work to make these!

[@DJDevon3]

That's about as safe of a rust removal solution as you could hope for. 2 weeks is a long time but if your tool is that rusted you likely aren't using it anyway so 2 weeks is worth it.

[@seejanedrill]

***** :)

[@yvonnegathing3634]

wow Ms. Leah, you're amazing and have an answer for everything. Thanks a million.

[@seejanedrill]

yvonne gathing you're very welcome, and thanks!

[@robertsprojects7698]

You can also put the rusty items in distilled vinegar and let it sit for 24hrs. It works great!!!

[@marctric]

This tip was simply SWEET. Thanks for sharing it.

[@seejanedrill]

LOL :)

[@dancooper6447]

You. Are. A. Genius! I am always amazed at your solutions to challenges in the garage and home! Thanks!

[@jintzie1950jth]

This is hilarious! I love it. Leah is a reliable guide, thank God for her.

[@laurelsporter]

I do it preventatively to new non stainless, too, like bit sets, that otherwise invariably rust like crazy. It sticks, without being sticky, over the oxide coatings, and slows rusting down by orders of magnitude, after helping remove any early rust.

[@saltyd2137]

Leah I enjoy your videos you don't get all hyper and do the ummm thing.Great Job! I think I've watched all of your videos. 🙂 Thank for taking the time to make them.

[@seejanedrill]

+Les K you're welcome, Les, and thanks very much for your kind comments!

[@jimtwisted1984]

You keep on giving Leah.I’m going to try that I have tools which have been rusty for 50 years so i guess waiting a week for them to get cleaned up is alright.

[@rhansen1969]

Wow, who would have thought molasses would clean off rust? Great video!❤

[@42lookc]

Great video. I use apple cider vinegar, undiluted. In two days whatever corroded metal item you soak in it will be bare, virgin metal. If there is residue, scrub with a wire brush and then a rinse with water and dry THOROUGHLY AND IMMEDIATELY, because it will start to rust within moments. Prime and paint or otherwise coat it the same day.

[@MaggieTrudeau]

This is exactly what I needed to know for all the old tools I buy!!! Thank you.

[@jimmyjames6318]

WOW, thanks Leah. At first I thought, I know this, it's the oldest trick in the book. But I forgot you said non caustic, so Coke or Pepsi are out. I guess you're never too old to learn new tricks, that's why I'm subscribed to you :-) Thanks again

[@seejanedrill]

***** you're welcome, James!

[@marymathis9299]

God bless you, Honey! I just knew you would have something up your sleeve to handle rust that wasn’t dangerous! Kudos to you! Thanks so much!! 🥰👍🤩👏👏👏👏👏

[@eternalfizzer]

I never knew! Sitting right on my shelf here in Newfoundland.

[@GaryBowen73]

Was 100% surprised! I was totally expecting you to whip out the vinegar!

[@SophiePassmore]

Thanks so much for your videos, Leah. We all need to see more knowledgeable and capable women in the world making, using and maintaining the things we use in our everyday lives. Thanks again :)

[@seejanedrill]

+Sophia Passmore you're welcome, Sophia, and thanks for your comments!

[@judithcopeland6821]

On my gosh! I would not have guessed that at all...wow. Thanks Leah, for another useful tip!

[@allisonferguson6040]

This blows my mind!

[@marywilliams16]

Thanks! Had to try it. Waiting the first week.

[@semco72057]

I didn't know that and the tools do look so much better. I wonder if it works on a socket set. I have one set which I had in a vehicle and it got wet when some jugs of water I was hauling spilled all over the tools and I didn't notice until a month or two later. I saw this one video showing how to remove rust from vehicle bumpers and other parts and was going to try that out on my box blade which has some rust on it.

[@presidentialsuite6406]

I never tried molasses on rust. But i have used meat tenderizer and cream of tater on some small things. However not tools. You make a paste(you can use one or the other,i even used both) with a little bit of water. Then rub it on the rusted surface. Let it sit for a few minutes. Then rub it off. It may take some elbow grease with a green scrubby. But it might help if you are in a hurry. Also i heard coke a cola and a ball of aluminum foil as a scrubby takes rust off some metal but I never tried it. I think i will try your method. It is a lot easier. Thanks for all your great videos

[@theinsaneshecklador6598]

I don't have any molasses in my pantry but I do have vinegar which also works to remove rust. It is a little more aggressive and works faster so be careful about leaving things too long. I usually only soak things overnight.

[@vanwin5415]

Leah, how do you learn all these things? Have just told my sister to watch you, it's a nice change to see a lady so clever.

[@sandrabutler4278]

I have never heard of using molasses! Cant wait to try it. Ive always used vinegar.

[@toonman361]

Really nice. Thank you for sharing this. I have never taken a basic chemistry course and that's what this is about. Much appreciated Angela. I've been using Evaporust which is biodegradable but still a chemical. To get a brighter surface, I take it one step further by using a fine grit (240) abrasive block. The eraser-like block gets the dullness off the metal and is flexible enough to clean tiny areas. I've been experimenting with the product Penetrol which coats the bare metal and has a high success rate in preventing rust buildup. It's messy but works.

[@seejanedrill]

David Damico you're welcome, David, and thanks for your comments!

[@LouAlvis]

i love all your stunningly usefull posts! I am doing this one TODAY. rust be a challenge in the Pacific North Wet

[@mali2640]

Great tip Leah. Which oil did u use to protect the tools after the cleanup? Thanks!

[@wocketman1629]

That is awesome!! I am used to using vinegar to do this, but I hate the smell of it. Molasses smells so much better:-) Thanks so much for posting this!!!

[@seejanedrill]

Jason A you're welcome!

[@k.b.woodworker3250]

Never heard of the molasses trick. I used some expired vitamin C powder mixed with water to clean garage sale rusted planes and plane blades. I start with hot water and then heat it on the stove as it gets cool, if needed. I used a scotchbrite pad to remove the rust, though steel wool will work too. This works within a few minutes or hours, depending on how bad the rust was. Safe, and protects the planes from getting colds ;) Since I rarely have expired vitamin C, and using new would be expensive, the molasses would work especially on larger tools. I'll try it next time I need to clean up rusty tools. Thanks!

[@you2tooyou2too]

The rust on the surface of any metal is made by combining metal molecules in the surface with oxygen from the air. Removing the rust takes the oxidized metal from the surface, leaving a tiny pit where the metal was (You can see the pitting in the star bit close-up). I recommend that you thoroughly spray clean or at least rinse each tool after the soak, to remove any traces of the molasses from the surface & pits & tiny spaces & joints in the tool, and then thoroughly dry the tool before spraying or dipping it with a thin film penetrating oil or petroleum sealant. If you don't, the sugar in any residual molasses attracts moisture from the air, and moisture and residual chelating agents will then continue to grow the pits in the metal surfaces.

[@jl.8137]

Smack down awesome. I've searching for ideas to clean my dad's old rusted tools but most use chemicals that I don't care to use. Thanks Leah great job.

[@angelaeast1895]

Awesome tip. I was not thinking Molasses. I just knew you were about to pull out some baking soda or vinegar. LOL. Thank you as always. You are so resourceful.

[@seejanedrill]

***** You're welcome, Angela, and thanks!

[@robinrwilsonsauls]

+Angela East Yep-that was my guess also. I have heard about the Molasses. When discarded- it will not endanger any animal/plant-that is what I like!

[@angelaeast1895]

That's good info Robin Sauls, Thank you.

[@gregoryashley7963]

Wow. Who would have thought? Thanks a lot for taking the time to make this helpful video.

[@seejanedrill]

+Gregory Ashley :)

[@sleepinglioness5754]

That's fantastic! 1. How do you dispose of the water/molasses? Can it be poured down the drain? 2. Do you think this process would work on cast iron pans?

[@columbuseric]

I thank you, for what you do

[@seejanedrill]

Eric Tanner you're very welcome, Eric!

[@pamelaallen6543]

Thank you so much for this tip. I ask you this very question on one of your other sites then found this. I should have known you would have this info on KZbin some where. You are my favorite wood worker guru.

[@seejanedrill]

Hi Pamela, I saw that you asked about rust removal on another video, then found this video. The molasses/water soak works great if you have a while to let the tools soak. Another product that I like (and that we did a video showing the product) is the wd 40 specialist rust remover soak. I used it to restore an old drill press. Here is a link to the video, in case you would like to see how it worked out: kzbin.info/www/bejne/pJ3diXSorc2kitU

[@pamelaallen6543]

I went over to the drill press make over, I'm so excited! Most of my tools have rust on them because I don't have an enclosed area to work. I am going to do this and then maybe paint and grease them to keep the rust off. Big hug to you girl for all your great information @@seejanedrill

[@wanderingangelstudio1359]

Your knowledge continue to amaze me. I love this channel!

[@seejanedrill]

thank you!

[@Fuktupratbag]

Nicely Done Jane. 5 stars ! most guys don't know this. or are too impatient to wait if they do. but the smell in the garage still smells like cookies for WEEKS afterwards. . I think it permeated the wood. ! ! : )

[@seejanedrill]

:)

[@medawson01]

WHAT!?!?! I can't wait to use this technique. Thank you!

[@seejanedrill]

Be prepared for a long process

[@nancymabry]

I have never heard of this! I’m going to try it!

[@lenharding72]

You are like the tool care science teacher. Coold stuff!

[@LuckyGuy954]

Awesome videos you have. I am learning a lot of tips and tricks. Thank you for posting

[@seejanedrill]

+LSquare365 you're welcome, and thanks!

[@kylelikeskjvbible]

Thats amazing, I'm always worried about my tools rusting since as an electrical student I gotta bring my tool bag in all sorts of weather.

[@SuperVaporman]

I didn't know that Lea, thanks for the nice video

[@seejanedrill]

+David Spiller you're very welcome, David!

[@zanderday4466]

learned something new today! can't wait to try it out! thank!

[@jimbrent8151]

This is a great tip... I usually use warm water and BonAmi with tooth brush to remove light rust scale... I would imagine doing that first would improve the results... I am going to try this two step process and let you know how it turns out. Thank you for this great tip and Best wishes.

[@seejanedrill]

+Jim Brent you're welcome, Jim, and thanks for sharing your tip also! :)

[@youmanot123]

You are brilliant!

[@ianbrodiesmith4085]

Molasses in the US. Black Treacle in the UK in think. Great tip eco friendly and cheapish for a change. Thanks

[@seejanedrill]

Ian Brodie Smith you're welcome, Ian, and thanks for the tip about what it is called in the UK

[@LifeBloodMarketing]

Just soaked a few tools for a month. Thank you for the tip. Uploaded a video showing the results.

[@seejanedrill]

Hey, yeah, I checked out the video. Pretty nice!

[@kooale]

Wow! Insane in the membrane! Super interesting.

[@stellacrowe3813]

I used straight white vinegar within 48 hrs rust was gone , but I had to be careful to cover only the metal part of the tool. Using molassas is something I didn't know about, thanks for sharing.

[@orsonkaart1853]

Excellent, never seen that before! Thanks Leah!

[@ehrengross1827]

You always have great tutorials. Thanks for sharing.

[@seejanedrill]

+Ehren Gross you're welcome, and thanks!

[@jublywubly]

What an awesome way to clean rusty tools! Fortunately, the only rusty thing I've had to fix, lately, was the old letterbox. It was just about all rust, so I drilled out the bolts and replaced the letter box with a much larger one.

[@seejanedrill]

+jublywubly Hi jubly! :)

[@jublywubly]

seejanedrill Hi Leah!

[@lloydjohnston5382]

I have been using molasses for years does a nice job

[@bfrbguide-skinpickinghairp8242]

I loved this one! Even the part about displacing or tipping the tray. I would've just painstakingly added more solution. Lol. Smart!

[@kylelikeskjvbible]

I love your channel. so much handy stuff.

[@jonlynch]

I felt sure you were going to say baking soda, vinegar, lime juice or curry powder or something like that! But no, molasses! Brilliant!!! Have you tried using the resultant molasses/rust slurry for baking?

[@seejanedrill]

+Jon Lynch LOL

[@mshomefire]

thank you great video. I only wish you had told me before I threw out my rusty tools.

[@evelynmontez3565]

Whaaaat???? I'm hooked on these instructions

[@daviddaigrepont9485]

E-gad! That was awesome! I wonder who the first person was to say,"I bet molasses might save these tools!"???

[@SouthernGirlInteriors]

Hey Leah.....OMG!! I would have thought baking soda but molasses. Great video because knowledge is power:) TFS

[@seejanedrill]

Southern Girl Interiors glad you liked it!

[@MultiTomcat67]

Just, 😸WOW. 2nd of your vids & I'm subscribed. Another option for rust removal: USED motor oil if you've changed it recently. Before taking it to your local auto parts store for recycling get more out of it. (You can remove the worst of the rust with a wire brush) soak rusty tools, dry wood handles in the stuff for a day or two.

[@michaels3972]

That "star chisel" is actually a reamer. Reamers are used on a lathe or drill to make hole round, straight and of an exact inside diameter.

[@seejanedrill]

+Michael Shomate No, it really is a star chisel. The two tools do resemble one another, however, a star chisel is used for masonry work, which is exactly what I use mine for.

[@golddustwoman29]

You surprised me. I was thinking it was surely vinegar or baking soda or something. Nope! I learned something new!

[@jmac213stuff]

It's a cool tip. Didn't know that, but most of the time I can't wait two weeks for my tools as I need them daily. But I do a few at a time, it would be cool. What I do is electrolysis, I use a car charger, with two graphic sticks, sodium carbonate(pool cleaner) and water. Same day. Rust is removed. Over night for some heavy caked on rust.

[@seejanedrill]

+Jose Macias Hey Jose, that's a great way to remove rust as well!

[@ghiagoo]

Great tip. Now I caN finally get rid of that bottle of molasses

[@joemarlett8590]

Great demonstration. Thanks

[@rayc1503]

Great tutorial Leah 👍. Any idea on combatting condensation in the rear of a van. This would prevent me having to do this to some my tools. 😊

[@nohabs]

Great video Leah. I hate having to open a window to let the stinky chemical rust removers out. I always seem to have rust on something.

[@TrikeRoadPoet]

Finally, a safe, simple way to clean those 'garage sale' tool treasures!

[@seejanedrill]

yep

[@rhondabarlow860]

Wow! Who knew?!? Informative video 💕🌱

[@timbylander7015]

Good info. Thanks. Just one thing though that’s not a star drill. It’s a ream for fine tuning hole size.

[@walterpalmer2749]

Yes and it helps the iron content for my molasses and pancake breakfast. Who knew ??

[@yzdrummer]

No wonder I love molasses mixed with butter and biscuits!!!

[@Redrachell4]

Once again Thank you, like always you have taught me something new

[@burtlade1705]

Nice video. The "star chisel" looks like a reamer to me though. Thanks for the post.

[@seejanedrill]

+Burt Lade Hi Burt, actually it is a star chisel, not a reamer. You're welcome, and thanks for commenting!

[@rod65man65]

Cool site, not hard to understand solutions , thanks a lot and God bless

[@markproulx1472]

Another fine explanation!

[@meedily]

Wow! I had no idea that molasses did that. Thanks!

[@seejanedrill]

+meedily you're very welcome!

[@missjewells5063]

That tip was great! It made me think of videos I’ve seen where people use Coke to pour on rusty bumpers, etc., to remove rust. I’ve used it on battery cables, and it worked like a charm. Now it makes sense ... it’s the molasses in the Coca Cola that did it, the chelating agent, not magic, Well it’s kinda like magic 🤪. lol

[@OGRH]

Do you think pairing this trick with an ultrasonic cleaner would speed up the process & possibly make it more effective? Great video!

[@jackjkantrowitz50kantrowit12]

What a wonderful idea. Is there any specific type of molasses that you use ? In the video you used dark molasses.

[@Maxid1]

I don't know, 2 weeks is a long time. I've used naval jelly for so long and the results have always been like new. I hear that's not the case with a lot of people that have used it.

[@seejanedrill]

Maxid1 yeah, it's a long time to wait. But it's completely non-caustic.

[@ala1998mc]

great video. I believe the tool you called a star chisel is actually a reamer (for drilling)

[@you2tooyou2too]

It is both, I have use it for drilling/chiseling holes for bolt protection while rock climbing.

[@ala1998mc]

@@you2tooyou2too this is for metal working, reaming out a perfect hole after you use a normal drill. only cuts around the circumference that's why its blunt at the end. common machinist item.

[@philrichmond7567]

Got a rusty tool box. Gonna try this solution.

[@FranciscoRodriguez-be6ik]

Thank you Miss Jane, it's very informative.

[@seejanedrill]

you're welcome, Francisco!

[@FranciscoRodriguez-be6ik]

seejanedrill I love the way you explain it, it feels so educational. For example, the word chelating. I learned something new. Thanks again!