Cleaning the Dyson V15 DETECT LASER SLIM FLUFFY Brush Bar

The Laser Slim Fluffy cleaner head of the Dyson V15 Detect has a washable brush bar. If you want to maintain optimum performance of our Dyson Fluffy Head, heck and wash your brush bar regularly.
Never put any part of your Dyson V15 Detect in a dishwasher or use detergents, polishes or air fresheners.
Hold the brush under cold running water and gently rub to remove any dirt orl lint. Stand the brush bar upright on an even hard surface. Leave to dry complete bone dry for at least 24 hours. Before re-inserting the brush bar, check that the brush bar is completely bone dry. To maintain optimum performance, keep the laser lens clean. only clean the lens when the cleaner head is not attached to the Dyson V15 Detect. Use a soft, dry, lint-free cloth to wipe the lens.

[@MrAstygmatyk]

Just bought my Dyson beast so naturally I'm on the outlook how to serve it properly. And this video is really helping Dyson owners to properly maintain the gear. Thanx aplenty, mate!!!😇

[@tonybatten5884]

Excellent video and very helpful - thank you. Couldn't work out why my machine kept giving the 'blockage' message when the canister and tube were clear - your video helped me find the hidden blockers in the head

[@Christina.N.]

Very helpful video. I'm always scared il force something and break it, but your video was very reassuring and covered everything.

[@EggZema_]

Very nice and detailed explanation! It was very helpful

[@skcreedon]

Excellent video. Thank you very much. You've spared us a phone call to Dyson!

[@matttulkster]

This guys videos are great thanks for the cleaning Tips have just done my V15 after long over due clean

[@debpratt4692]

I am SO THANKFUL for your video!! All of the other ones show using a coin..mine has no coin slot!! Thank you!! Thank you!!!

[@tamelawade3382]

Clear, precise instructions. Thank you!

[@MxPxRobbie]

Thanks! Ran over some sticky stuff that I didn't see and needed to clean the roller desperately!

[@kaym1123]

Who has time or reads manuals anymore? Thank you very much for this quick and helpful video!

[@BuhNanaz]

Thank you for the very informative, clear video!

[@garylbowler]

Highly appreciated! Extremely beneficial!

[@vickyross9999]

Great talk through. Helped a lot. Thanks

[@Woopnik]

You are very welcome Vicky. Have a wonderful weekend 😋👍

[@adriendouble5131]

Thank you, very nice advice and it work well !

[@richardghalayini2666]

Thank you kindly very helpful information much appreciated

[@lucywightman]

Excellent and so helpful❤

[@gerdaprusinskaite8490]

thank youuu! it really helped :)

[@buxon9966]

Wow! Everyday new video! I like it 😎

[@Woopnik]

😋👍

[@gefgal]

Brilliant Simple to follow and it works

[@snearboy42]

Thanks for the video!!

[@RichardLapierre-e4r]

Thank you so much Sir ! have a nice day

[@viswagururatan]

good way of explanation

[@beygirbey]

excellent video many thanks

[@CatNoda]

EXCELLENT! THANK YOU!

[@mwsellox7751]

Ooooeeeehh It's very wet. Great tips thanks

[@karkhuiho9223]

How to remove the hair stuck at the gear right next to the laser component

[@c3nsr]

use small scissors to cut the hair and then pick it out, works like a charm

[@Sam-rx8wd]

Even easier with one of those Stanley knives/box cutter knives

[@j.m.9918]

Cuantas horas de uso dura el laser? Aprox 🙏

[@nathusop6472]

Cutter, just cut softly the hair and it’s easy to put out

[@pell557]

worked great, thanks

[@alexat8421]

Thank you so much for this! :)

[@richardr1971]

Excellent, thank you.

[@trishbeauchamp1745]

Very helpful, thank you

[@milktea9501]

He passend away 😢

[@lilikoimahalo]

Thank you so much 😊

[@chris-tf8ud]

Very Good thank you

[@kirstihirvi8604]

Thank you so much!

[@genevieveacteau7453]

What about the large wheels at the back of the brush head? It gets full of dog hair and I can't find a way to take them out...is there a way? Thanks

[@taylorschram1399]

Did you ever figure out how to do this?

[@diamondnick5983]

@@taylorschram1399 what I do is just use a Sharp tool and slowly peel it off

[@taylorschram1399]

Yea I used a few different tools which eventually got the job done. Not something I’d like to do all that often but I guess it would be easier than letting it get out of hand

[@HPSauced]

I have the same issue with 2 retrievers. Wondering if anyone has taken a flathead screwdriver to pop out the roller? Afraid of breaking the plastic....

[@gingerpowell5644]

With a German Shepherd I have to stop and clean the wheels out often...I just pick, pick, pick! I hate it. I wish there was an easier way! Someone suggested using a seam ripper so I've been doing that along with needle nose pliers.

[@antonityminski8999]

But how to clean small wheels blocked by hair?

[@nathusop6472]

Cutter, just cut softly the hair and it’s easy to put out

[@cananilter5658]

Thank you so much! I could only with this video o could put the lazer head in place! Not with Dyson video.

[@SimoneDelicato91]

I couldn't disassemble this brush to replace the plush strip, it's really difficult

[@elememelon9175]

That was awesome

[@playmaker1011]

Thanks a lot!

[@LadyTusker]

Thank you so much..

[@angeleyes7531]

Thank you!

[@user-zy3yr9cg8t]

How to put bin back on Dyson gen5detect

[@perrette5183]

the purple joint between orange motor ang grey is gone , you too ?

[@arinaignatyeva4297]

Thanks a lot

[@theresabarnes2608]

I have this exact brush it doesn’t take 24 hours to dry just wash it dry it and put it in front of the fan it’ll be dry in a couple of hours if that.

[@DangerousDan79]

would be good to see you clean a dirty one. I had to wash all the little wipers with water. and use water to clean inside the head.

[@lilmizzk]

Exactly what I needed. I'm embarrassed by the amount of hair that was wrapped around the inside of the brush 😳

[@Woopnik]

thank you for watching , im glad my husband's videos is still helping people after his passing

[@Bernie3000]

I want that Bender print.

[@damngoctu1]

Thankk you

[@pOOlarisking]

So how do you clean the small roller wheels? Ours are full of hairs and barely turn

[@nathusop6472]

Cutter, just cut softly the hair and it’s easy to put out

[@sebgc]

I have many dark spots at 45 degrees. They show up after 30s of using it. Am I the only one?

[@kristinailicheva9208]

🎉 thank u

[@alessiocaruba7868]

10 +...thank!

[@georgescharitat1113]

GREAT !

[@davidgraflex2065]

I love Dyson vacuums but cleaning vacuums them selves is a nightmare

[@maurovitullo7157]

Hello, what about pulling the little wheels off? I have dog hair tangled all around both wheels and I can't remove it efficiently. Any guidance would be much appreciated!

[@Nikitikitavvi]

I popped them out. You can use a thin tool for that. Sort of scoop it out

[@Woopnik]

hello thank you for watching, this is Michael's wife , my husband passed away a year and a half ago, im sorry i cannot answer your question

[@maurovitullo7157]

@@Woopnik I'm sorry to hear that, my condolences and I hope you are well. Your husband was a very helpful member of this community. Take care.

[@barbarariley5261]

@@Woopnik Thankyou for telling us about Michael’s passing. I hope that it’s some comfort to know that he was valued by many people across the globe. He explained things so clearly and helped a lot of people like me. Condolences from Barbara in Australia.

[@11grisen]

What about the small wheels mine is full of hair 😢

[@Woopnik]

hello thanks for watching, sorry Michael wont be able to answer your question my husband passed a year ago

[@gregg7626]

What is the logic of using cold water to clean the brush bar? Doesn't hot water and soap clean better?

[@Woopnik]

hello thank you for watching, this is michaels wife, my husband wont be able to answer you he passed away last november

[@gregg7626]

@@Woopnik I'm very sorry to hear that. I wish you peace.

[@perrette5183]

NO soap on the brush ?

[@Woopnik]

hello thanks for watching, my husband passed away more then a year ago, no soap on the brush

[@MW-qv5ox]

Is it normal for the head to not spin very fast?

[@Woopnik]

hi sorry my husband wont be able to reply, he passed away a year ago

[@MW-qv5ox]

I’m really sorry for your loss.

[@user-me3kz5ps5j]

любая модель ужас кубик рубика! самый лучший. шмель !!!!!

[@Ks-ccc]

👍

[@vinsang3283]

hello the laser brush of the v15 is it compatible with the v11 absolute pro? thank you

[@Woopnik]

Good Morning VINSANG. Yes, it does work with the V11 and V10. Have a great weekend 😀👍

[@vinsang3283]

@@Woopnik thank you 😁

[@Woopnik]

😋🤓 You are very welcome 🤗

[@Woopnik]

Also, interestingly enough, the laser is not powered by the V15 directly. I figured this out after pushing the laser fluffy head on carpet without the machine running and the laser lights up if you push it fast enough. Must be using the rollers motion to energize the laser. Pretty cool stuff!

[@vinsang3283]

ok great that's cool thanks for the info 👌😜

[@morris9496]

That floor needs more than a Dyson...