I've got a clever "NO SKILLS NEEDED" DIY that's a game changer for all you DIYERS out there!
Пікірлер: 97
@kimsims929325 күн бұрын
Till it melts a hole in it
@Belindasdiys25 күн бұрын
It’s not touching the bottom..so it should be fine.
@gwensimmons_gigi162924 күн бұрын
@@BelindasdiysBut doesn’t the tip touch the side wall?!?
@MARY-tw7lh23 күн бұрын
You can also put some foil in the bottom and sides if you’re afraid it will burn a hole in the vanity…but I think it will be fine!
@duhhuh5821 күн бұрын
That was my first thought when she put the glue gun in it. The tip is right at the side of the organizer. Also, how do you get all of the glue that drips onto the bottom of the organizer? It's a great idea, but it needs some tweaks.
@Southernsista20821 күн бұрын
@@duhhuh58put a piece of a silicone pad like they sell at Dollar Tree in the bottom then it can be removed n cleaned occasionally. 😊 Plus, it should keep the organizer from melting if you put a big enough piece in there.
@kristalhumphreys462121 күн бұрын
What a functional idea that could be used to store numerous items ❤
@Belindasdiys21 күн бұрын
Yes 😊
@ms.krueger266015 күн бұрын
I use it for my toothbrush, toothpaste and floss!!😁
@irvingandleikagrady44316 күн бұрын
I was just going to post that. I do the same. It's perfect for our electric toothbrushes.
@Itsmehi4564 күн бұрын
Good idea. Aesthetically I think it’d look nicer on one of the bamboo cutting boards.
@Inspiration000021 күн бұрын
Thank you for sharing i will try this . Many thanks 👍
@Belindasdiys21 күн бұрын
Your welcome thanks for watching 😊
@uschihouseholder823720 күн бұрын
I have to check if the glass trivet is big enough for the base, it adds weight to it. Great idea!
@karashea782322 күн бұрын
LOVE THAT! Thanks❤
@Belindasdiys21 күн бұрын
Thank you so much!
@mylittlebronxify11 күн бұрын
That’s a great idea
@kathyjones486912 күн бұрын
Love it!
@Belindasdiys11 күн бұрын
Thanks!!
@mo-EX141423 күн бұрын
This is a great, great, great hack.. ❤❤❤
@Belindasdiys23 күн бұрын
Thank you 😊
@tamalamozie557425 күн бұрын
Great ideas!! 👍😁🤗
@Belindasdiys25 күн бұрын
Thanks 😊
@bailey30156 күн бұрын
if you want the writing off of the board, you can try acetone/nail polish remover. usually removes most factory paints
@daisycastillo598425 күн бұрын
Awesome great idea
@Belindasdiys24 күн бұрын
Thanks!
@AccessoriesAddict552822 күн бұрын
Awesome!!
@Belindasdiys22 күн бұрын
Thanks!
@nahnisjourney140620 күн бұрын
Great idea! Gotta try this! Thanks a bunch!!! ❤❤❤
@Belindasdiys19 күн бұрын
You are so welcome!
@susanchappell685615 күн бұрын
❤ great idea
@Belindasdiys14 күн бұрын
Thank you! 😊
@carolynmcdonald274625 күн бұрын
Now this is helpful!!
@Belindasdiys25 күн бұрын
Thanks 😊
@dawnsullivan623318 күн бұрын
Awesome
@Belindasdiys18 күн бұрын
Thanks!
@LauraD4393525 күн бұрын
NICE🙌🏼
@Belindasdiys25 күн бұрын
Thank you so much!!!
@DIYwithAurea20 күн бұрын
This is a great idea my dear friend❤
@Belindasdiys20 күн бұрын
Thank you so much 😊
@vanessafarias324419 күн бұрын
Great idea! I love it!
@Belindasdiys19 күн бұрын
Thank you! 😊
@melindaelizabeth936625 күн бұрын
Awesome idea
@Belindasdiys25 күн бұрын
Thank you 😊
@janbuetikofer33369 күн бұрын
Like this
@areyoubeewhy241319 күн бұрын
Perfect!
@elizabethflorez237222 күн бұрын
This is great ❤
@Belindasdiys22 күн бұрын
Thank you 😊
@cosmichouseofrose978817 күн бұрын
Great idea!❤
@Belindasdiys16 күн бұрын
Thanks!
@kennyshoes25 күн бұрын
Why did you use both super and hot glue? 😂
@Belindasdiys25 күн бұрын
Hot glue for instant adhering and super glue for permanent hold.
@lucydomenech677423 күн бұрын
The hot glue will melt the plastic!!!
@Belindasdiys23 күн бұрын
No it has not. 😊
@LindaCope20 күн бұрын
Must be a low temp gun then.@@Belindasdiys
@happydays714321 күн бұрын
Cover the inside of the base to hide all the glue.
@Belindasdiys21 күн бұрын
Good tip 👍
@YValentine7921 күн бұрын
The comments 🤣😂🤣😂🤣
@leilutz636417 күн бұрын
You might be able to use a hot surface protector from DT and use it to cool as well? I love hacks!
@Belindasdiys16 күн бұрын
Thanks for watching and thanks for the tip.
@ButterflyKisses.16 күн бұрын
I have one of those hand mixer things you know the slender one that has all the little things shop froth the cocoa which that sang tore up two days but I would love to have an idea that I could leave wait a minute I believe this work for that. Oh never mind .
@michellecastro247521 күн бұрын
Love it. Ty.
@Belindasdiys20 күн бұрын
Thank you so much!
@marysiniawa537111 күн бұрын
Place something that can protect the bottom of the part that the hot tip of the glue will not burn a hole.
@user-je2ny1mq1o12 күн бұрын
👌
@nm681811 күн бұрын
It's storage.....for whatever you need.
@juliannecaffey832219 күн бұрын
Great idea! I’m thinking that if something was added on the inside where the tip of the glue gun goes you can use it when it’s hot.
@Belindasdiys19 күн бұрын
Thank you 😊
@kc_252512 күн бұрын
My son is a firefighter. Do NOT use this hack unless you only use a LOW TEMP glue gun. It can and will eventually burn a hole my melting thru the plastic if left in holder after use
@Belindasdiys11 күн бұрын
Thanks 👍
@Oonagh7225 күн бұрын
That is actually a lot genius.
@Belindasdiys25 күн бұрын
Thank you 😊
@shellyannray360117 күн бұрын
❤️❤️❤️
@patnichol127525 күн бұрын
Something I can actually use!
@Belindasdiys25 күн бұрын
Awesome 😊
@fburton84557 күн бұрын
Use E6000 glue
@lovly2cu72518 күн бұрын
melt plastic with hot glue gun
@Belindasdiys18 күн бұрын
No it has not
@LindaCope20 күн бұрын
Won't the HOT glue gun melt that plastic?
@Belindasdiys20 күн бұрын
If the tip stay off the plastic. Mine glue gun does.
@fburton84557 күн бұрын
There are no acrylic "boards" at the dollar tree
@lisastrohl266815 күн бұрын
what the...? 😶
@Belindasdiys15 күн бұрын
🎊
@VendettaAllspice6 күн бұрын
Does the dollar store sell anything that isn't made of plastic.