Clio 200 EDC, Hybrid turbo/upgrades

USE DISCOUNT CODE ADEYSPEC10 for 10% off at Forge Motorsport www.forgemotor...
and EZADEY10 for up to 10% off at EZ CAR CARE (use the link)
www.ezcarcare....?sca_ref=2404522.nki8ueI1Jx
Fitted up some upgrades to the Clio. Mamba 21t hybrid turbo, ktec 3 inch decats, custom intake, airtec cold side boost pipes and a forge motorsport intercooler kit, mapping coming soon

[@MidnightG37]

Awesome ! Sounds really good ! The smile you have on light throttle as turbos spool says it will be a blast to drive once everything is how you want it . Great driving roads around there lots of fun for sure

[@Adeyspec]

cant wait till I can do some full pulls on it (y)

[@MidnightG37]

@Adeyspec looking forward to the videos! 😊

[@elwinbassaget7780]

There are so few videos on the Clio 4 RS, even less on modifications like these, absolutely great work! Thank you for actually showing the whole process of it, i was hesistant on doing a turbo upgrade on it but it's actually pretty simple to remove, i will 100% do the same in the future ! I know you have now tuned it too, did you try to do 0 100( or 0 60) pulls on it? I would love to know the time it does at 300hp

[@Adeyspec]

thank you glad it helped. I haven't properly timed it, though 0-60 I doubt will change too much, it'll probably just wheel spin more. 60-100mph time will have a decent increase though. I will try to get some videos of it on a run soon

[@turborob2327]

Sounds lovely that

[@richard1galvin]

Great job, may go a simpler route with my own. Same colour and year.

[@user-hg7tw3ve4s]

Great work 🎉❤

[@Adeyspec]

thanks

[@warren_sutton]

Amazing upgrades, and great videos - are you able to confirm the part number for the Mamba turbo you used? Thanks again.

[@Adeyspec]

Yes I can, the one I used was 001-1154, MAMBA 9-6 Billet Turbocharger FOR Nissan MR16DDT TIIDA JUKE TD04HL-21TK. it'll be too big for most, there is a slightly smaller 19T version

[@warren_sutton]

@@Adeyspec - Thanks for getting back to me. Really appreciate it. In terms of the size, too big because of lag and late spool? Thanks again. W

[@Adeyspec]

@@warren_sutton later spool really. itd be perfect if you could get the gearbox to allow higher revs but its my current limitation. most would be better using a smaller unit that give better bottom end because of this. if you get on the clio fb page there is a chap there called ian wilacy who can build a 300bhp hybrid turbo.

[@warren_sutton]

@@Adeyspec - Awesome. Thanks for taking the time to respond too. I'll look at the 19t Mamba Hybrid. Bought the Clio in October last year, I absolutely love it, and am keen to push my daily to be a little more responsive. Looking forward to seeing more of your build vids too. Regards - W

[@kevinkim3663]

Hi Adeyspec, I live in New Zealand. I got 15' Clio RS and it's stage 1 (Bluefin) ECU tuned, Maxogen ITG Cold Air Intake, Cold Boost pipe, 2nd Cat and Resonator removed. I'm thinking about getting Hybrid Turbo (Mamba turbo the one you got) from Australia or UK. Can I bolt on this turbo only, or do I need to purchase Front Intercooler as well? And also can I drive without tuning, or does it need to be tuned again by proper mechanic/garage? :)

[@Adeyspec]

The factory intercooler isn't very good. That said you could fit the hybrid and run it. I wouldn't drive hard without a map though.

[@BarneyWobba]

You forgot to make a vid for the intercooler :D

[@Adeyspec]

you are not far wrong. I did record it all, 85% of became corrupted and wasn't usable 🤦‍♂

[@BarneyWobba]

@@Adeyspec Awhhh :( Oh well. I'll be looking at an intercooler before a remap I think, I hear the bumper is easy to remove?

[@Adeyspec]

@@BarneyWobba yeah not much to remove it and the intercooler is easy to fit

[@josh2703]

hello, did you have to configure the wastegate and do you have the stock recirc valve still?

[@Adeyspec]

i still have the stock recirc valve in place. We added some preload to the stock actuator during mapping (y)

[@DinoxBusiness]

Can you list the parts you installed here please. Especially the turbo name

[@Adeyspec]

turborenault.co.uk/threads/oops-i-did-it-again-adeys-clio-200-edc.178834/page-14#post-1219210

[@Black-Sheep-Bikes]

Adey you got a link to the front splitter ?

[@Adeyspec]

www.ebay.co.uk/itm/275213242809

[@luisvillarruel]

Nice job, where did you got the mamba turbo?!

[@Adeyspec]

www.mambatek.com/en you can get them there. if you sign up you get a discount in your birthday month, so if its October you will get a discount in October 😉

[@luisvillarruel]

​@@AdeyspecI couldn't find the 21t hybrid on their site....

[@Adeyspec]

@@luisvillarruel www.mambatek.com/en/products/mamba-9-6-billet-turbocharger-for-nissan-mr16ddt-tiida-juke-td04hl-21tk-350hp