Clone and UPgrade your NVMe SSD with Acronis and Crucial

Hello IT Pros, this is Alvendril! In this Video, Clone and UPgrade your NVMe SSD with Acronis and Crucial, I show step by step how to clone your current NVMe SSD to a new/bigger one using Crucial that comes with Acronis cloning software. If you have another SSD brand you can use Macrium free cloning software. Hope it is useful.
💵 One-Time Donations: www.paypal.com...
📌NVMe SSD and adapter cable:
Crucial NVMe: amzn.to/3imc00L
NVMe M.2 to USB: amzn.to/3XkUDOH
🎵 How about 2 audio books for free??
Get 30 Day Free Amazon Audible: amzn.to/38v9DPW
🛒 How about Amazon Prime for a Month?
Get 30 Days of 2 day delivery, Amazon Music, Prime Video and more: amzn.to/3itb469
► Share This Video with a Friend: • Clone and UPgrade your...
► Clone you SSD with Macrium free Software: • Clone and Replace your...
► Add me in social media:
Twitter: / my_it_workshop
Instagram: / myitworkshop
#nvmessd #cloneSSD #Acronis #CrucialSSD

[@MyITWorkshop]

Hello IT Pros, If your SSD is not Crucial, you can use Macrium free cloning software. I leave the link for the video here: kzbin.info/www/bejne/hp2cZJJudqh-mdE

[@derjustinaus_bocholt]

Nice video but if you discharge without the psu plugged in, it wont really help , i prefer to use a european power outlets ground pin .

[@respectspell2137]

Thank you very much for your time and assistance. I find myself in a bit of a challenging situation and would be grateful for your guidance. I’m planning to upgrade my storage by replacing my current 2x1TB SSDs, configured in a RAID 0 array, with newly purchased 2x4TB SSDs. Could you kindly guide me on the correct process to clone my existing SSDs and reconfigure the RAID 0 array for the new drives? I’ve also recently acquired an NVMe M.2 Dual-Bay Offline Duplicator, which I believe could be helpful in this upgrade. However, I’m unsure about the best way to use it. Could you advise whether I should complete the duplication process first or if it’s necessary to set up the RAID 0 array in the BIOS beforehand? Any insights you could provide on the ideal sequence of steps would be greatly appreciated.

[@martinc6095]

I bought the same ssd and followed your video, everything worked out fine. Thank you very much.

[@heli0s2003]

Thank you. I was going to upgrade my laptop to a 2.5 ssd, but the battery overlapped where the ssd should go. So, I gotta do this now. Thanks for sharing the instructions

[@MaurySmith]

Can you use the crucial software with any ssd installation? Thank you🌞

[@gabrielleonardo6656]

I do have a Kioxia 256GB m.2 with the SATA key, BUT it is a m.2 NVMe x2 as described by both the software (crystaldisk, toshiba app) and the data sheet. It is manufactured sometime in 2018 (laptop is from 2019)

[@23DGM23]

BOOOOM PERFECT! BEST REGARDS FROM GERMANY-ITALY!

[@stevenelson8560]

Thanks, very helpful.

[@PrAnG2000]

Can you explain how to install OS to a NVME drive on a caddy from a Cloned image I made with this software? Thanks.

[@garys.674]

So I'm having problems with mine. With 1hr and 40min left the software suddenly stopped and said turn off computer. When I put the new drive in the computer it would not boot. So I tried cloning it again. This time Acronis said it had to restart. When it did it locked at start screen and wouldn't reboot. So I put the new drive in again and it wouldn't boot again. I'm on my third time cloning and it's just stuck at process 5 of 7. Says copying and merging partions. Should not the new drive boot as soon as it's installed?

[@Saleh2]

Hi, after 9 months, how is it with you? Did you solve the problem?

[@garys.674]

Never did work. Returned drive and got a Samsung then used Samsung software. Thank you for your concern.

[@Saleh2]

@@garys.674 Thank you for your reply.

[@timlist4173]

So, what if your ssd, once you clone the ssd, has a unallocated section section of say 500 gb, that is not adjacent to the boot partition (C: drive)?

[@Isyrawr]

Hi, can i clone my sata to the new crucial nvme within the motherboard instead of using a m.2 usb adapter??

[@RyoistheMAN]

Thanks mate! Very helpful video 💯👍👍 *Whisper: You might need to upgrade to a magnetic screwdriver 🪛

[@missyouJun271]

Great video; can I still use Acronis True Image for Crucial if my source SSD is Dell to Crucial SSD

[@MyITWorkshop]

Hello, Yes, the source hard drive can be any other brand. Ty for the comment!

[@bbraat]

@@MyITWorkshop I got the message, "this product edition requires at least on crucial ssd be installed in your system." It seems to want me to buy the "latest unrestricted version".

[@MyITWorkshop]

@@bbraat Hello, i added a link in the video description for SSDs that are not Crucial. You can use Macrium free software: kzbin.info/www/bejne/hp2cZJJudqh-mdE Hope it helps Thanks for the comment!

[@yougotrizz]

In my case i have only one mvme slot so i have cloned my original and put the new one in, do you know how to turn the old one into a external storage device (i have an enclosure for it to allow it to plug in via usb-c/a)

[@imponish]

what clonig software did you use im in the same boat and having issues

[@yougotrizz]

@imponish acronis true image, its for crucial branded m.2s I believe but you just need to have 1 installed

[@missyouJun271]

Will TPM (Encryption) be an issue for Dell Inspirion G3 15 3590?

[@MyITWorkshop]

It shouldn't, but if that's a concern you can suspend bitlocker on your machine and after a reboot it will be enabled again.

[@themoog]

Don't forget when discharging yourself, you need to leave the computer plugged into the power outlet with the mains power switch at the socket switched OFF; otherwise, you won't have a ground to discharge yourself on. Just be safe!

[@melee5568]

The problem that I have is There are 6 running Acronis in the background. Is there a way for me to disable these or remove Acronis because I've already cloned my HDD to SSD now.

[@MyITWorkshop]

Hello, Since you have already cloned your hdd/sdd I’d uninstall Acronis. Unless you run backups with Acronis there is no need to keep it installed. Hope it helps Ty for the comment

[@melee5568]

@@MyITWorkshop hello thank you for replying. When I try to uninstall Acronis my screen wallpaper turns to white for some reason..

[@dravenripley9468]

This didn't work for me☹️

[@NorfolknStealth]

Thank you..

[@dcaveman2027]

nice 👍🏼

[@HashyS_]

I swapped mine with an old one and I had to clone my old one to the new one but when I’ve put my new one in I got “repairing disk errors, this might take over an hour to complete” anyone got a fix ?

[@__alves_]

Do you get it fixed? I'm having the same situation

[@paddyg3389]

This video makes no sense I have a 500gb m.2 and I wanna clone it to 1tb m.2

[@goldjellyfish2452]

Are you Greek?

[@kaystokkermans9421]

on amazon. the SSD with acronis is cheaper then the SSD without acronis. Why??

[@xxdemonshitxx]

I'm attempting to clone my 512GB NVMe Gen3 to a 4TB NVME Gen4 (limited to Gen3 by BIOS) with Acronis TI 2017 (Win11) , but once it starts preparing to clone it says I need to restart my PC "or the process will fail.". But when I restart, nothing happens...the cloning doesn't continue. Why? Both drives are UEFI...

[@Ugly_Mug]

Will this work cloning a Crucial onto a Samsung 980?

[@MyITWorkshop]

Hello, Yes, the concept is the same. If it does work with Acronis you can use Macrium free cloning software. Thanks for the comment