Cloning hard disk using fideoc. @landomanaf @Computerphile
Пікірлер: 34
@ortegacomputacion Жыл бұрын
thanks for the video, Im never sure which one is origin and which one is destination, still your video helped me a lot, its just the words used, we techs use source and destination as descriptors for the original disk and the clone disk (a copy of the original) , so for the readers in the future let me say the base copies from FRONT to BACK (looking it from a different point of view, it clones FROM the sata port closer to the two usb and card reader TO the sata port closer to the power supply and usb cable port which is supposed to stay disconnected) . you welcome.
@damizan8331 Жыл бұрын
So do I need to format the 2nd hdd (destination) beforehand or just clone it?
@danwhite32242 ай бұрын
Thanks for the clarification! The video is great but the wording in the video is slightly confusing, so this comment really cleared it up for me.
@christopherwatts89097 ай бұрын
This spot on in every way. Easy to follow and enough time between each instruction to enable you to complete the task. Thank you 😊.
@panchomartinez53742 ай бұрын
First video well explained and clear. Thank you.
@SREEKANTHKADUNGIL3 ай бұрын
Thank you man. So easy and perfect
@forric233 жыл бұрын
Thank you so much for putting this together, I could figure it out, and I lost my instructions, your video really hellped!
@pcruns2 жыл бұрын
The source disk is the one being cloned, the destination disk is one being cloned too. Just saying.
@neilwalker4575 Жыл бұрын
Thanks for the video. I've done this process a number of times now, but I always come back to this video just to double check what to do.
@A-ELL2 жыл бұрын
The first thing on screen said "**Make sure the capacity of clone hard disk is LARGER than source hard disk**" the video then shows BOTH disks to be 500GB [at 0:36] WTF?
@mikenco10 ай бұрын
Mute the sound and set video speed to 2X. Makes this bearable. To be fair, the info was useful, thanks.
@mcjjordan6 ай бұрын
I got solid leds… they were flashed but now both solid. Been hours
@MalcolmJames-sg3zg9 ай бұрын
thanks for the video , very helpful 👍
@tilu33032 ай бұрын
I had a digital manual for mine and can't find it. Anyone have one to share?
@JustinEmlay2 жыл бұрын
LOL, you say the blue drive is the source then you use the other drive as the source later on. Also, a clonED drive is the source drive. The clone (no ed) is the target drive. It also does not transfer files. That would impossible without an OS and the other drive first being prepped with a file system. This is a bit by bit copy and both drives are constantly going at the same time. Also that is NOT what the lights mean. Look at the symbols. 1/3. 2/3. 3/3. That's a progress bar. You also need to make sure the USB cable is not connected to anything when you want to clone. Cloning ONLY works while in stand alone mode. You should take this video down and fix it. Everything about it is wrong.
@peter44882 жыл бұрын
And remove or change the distracting rock music
@udance4ever Жыл бұрын
thank you for clarifying it's a bit for bit copy! my biggest concern is whether or not different manufacturers make 6TB drives that may differ by a few bits or bytes. I'll know when I get my 2nd drive next week!
@JustinEmlay Жыл бұрын
@@udance4ever That can be a problem. I've tried to restore drives that were, lets say, 4TB to a new 4TB drive and it would refuse because there wasn't enough room. Some companies make a 4,000,000,000,000 (TB) drive while other make a 4,398,046,511,104 (TB) drive.
@WeFixChannel Жыл бұрын
How long should the cloning take? I have 1TB hard drive in to 1TB SSD been on for hours no sign of life in the second blink just stuck on the first light. Any help welcomed
@mojay11 Жыл бұрын
I'm glad I'm not the only one dealing with this issue. I just bought a Fideco YPZ220C docking station and I'm doing a offline clone from a 1TB HDD to a 2TB SSD and it's been going for a while constantly blinking on the second light during the cloning which has been going on since Thursday afternoon and stuck on the first light which is solid. Is it suppose to be like that or is it possibly an issue? I appreciate any help or advice.
@mikenco10 ай бұрын
How long did it take in the end? @@mojay11
@mojay1110 ай бұрын
@@mikenco I had to end up stopping the clone process. When I checked the hard drives on my laptop it looked like everything moved over. I think my old HDD hard drive was defective and it needed to be replaced. The only thing that sucked was trying to move the extra space from the SSD and merging it with the old drive and that didn't work because it was less space than the new so I had to do a clean slate and reinstall Windows 10. At least the SSD drive is fast when loading up.
@NathanThePrezPretlow2 жыл бұрын
Disk 1 light was blinking but why disk 2 red light stays on no blinking.Trying to clone SSD to another SSD hard drive.
@joesaiditstrue3 жыл бұрын
their instructions say to hold the button until all lights start blinking, then release. then press a 2nd time?
@landomanaf3 жыл бұрын
no need 2nd time. 1 time only.
@carstenwilliams7733 Жыл бұрын
fideco wont to my Samsung 2t clone seagate 500mg hard drive
@KnJ-G4M1NG3 жыл бұрын
question sir can you determine the file size (source) and how long well it takes to transfer it to the target? thanks!
@landomanaf3 жыл бұрын
hi,size of source hard disk is around 400gb, it takes about 2.5-3 hours to completed
@MrDJZeman3 жыл бұрын
Hi plz can u tell me how many time the clonage make ? i have hdd 2 to , to my 4 to did takes really long ?
@landomanaf2 жыл бұрын
clone process can be done for 1 clone harddisk. normally hdd (400gb) will takes around 2-3 hours. if ssd to ssd,the process more faster than hdd
@jennifermedia62882 жыл бұрын
does this do a block level clone?
@SallowDawn2 жыл бұрын
can't clone from a larger HDD to smaller SSD :(
@landomanaf2 жыл бұрын
yup. hope one day you can get bigger ssd. amen
@kwamesefwi2 ай бұрын
This device takes forever to clone just 500GB. I am a technician and I have worked with devices much faster