Clscea G500 DIY CO2 Generator Kit for planted Aquariums with tool holder 2-in-1

DIY CO2 System; Carbonated drink bottle CO2 Generator Kit;
Get it now: www.amazon.com...
We also have DIY CO2 kit that doesn't have the holder, it will be a little cheaper: www.amazon.com...
Visit Amazon Store for more CO2 items: www.amazon.com...

[@Fishaddict1970]

Just hooked mine up and it works great !! I love the instant reaction of the citric acid and baking soda it’s way better than sugar and yeast And if I can get 25/30 days out of it that will be great !!!

[@JHobartMusic72]

Man, I’m sure glad you can beat on it with a hammer, you guys must know how I put things together 😂

[@JHobartMusic72]

My pressure valve under the gauge opened up to release pressure and now it won’t close again. Is this fixable? I’ve washed it with hot water and done everything I can and now it just leaks non stop

[@Clscea]

You need to remove the safty valve and clean the silicone gasket and the gas hole. And then reinstall it. Please send email to: [e-mail] we can give you some video or picture guide to show you the detail.

[@Toolhaul]

If I want co2 off overnight I can close valve but pressure valve will vent I assume. Can reaction ball be lifted to turn it off and not waste co2?

[@Clscea]

No. If you need to turn it off for a short time each day, just close the on/off valve. The pressure relief valve will not relieve pressure at normal pressure values. If you are not trying to relieve pressure, do not lift the acid absorbing ball above the liquid level for long time. Otherwise you may need some steps to get them to react again if you forget to put the ball back.

[@martinelinzer758]

pourquoi il ne sort pas de bulle du diffuseur seulement petite bulle en groupe ? Dans mon kit il n'y avait le support vert peut on l'acheter separement ?

[@Clscea]

Please Email us using the Amazon order Emial. We will confirm the order package for you.

[@kevinnguyen8822]

Need help after 3 time use ,liquid citric go to bottle B but co2 not transferring to aquarium thank

[@Clscea]

Need more detailed information, please email [e-mail]

[@rjrgrams]

I had the same issue. The site isnt even available to explain. Were you able to figure it out?

[@legainnamchyo4836]

Hey! Do I have to shake the bottle again when I have to use it the next day as my baking soda has been settled down as a sedimentation over night.

[@Clscea]

If the pressure value is in the green range and the acid absorbing ball in the citric acid bottle is below the water surface, there is no need to shake the bottle of baking soda again. It is normal for the baking soda bottle to have sediment.

[@tanyarae9251]

I have a 75 gallon tank, I want to get the 4L stainless setup, but I cant afford that at the moment, would this soad bottle pack be enough to help get a 75 gallon started? How long does it last/how often does it need to be replaced?

[@Clscea]

For this cola bottle CO2 set, you can add 200g citric acid and 200g baking soda each fill. If you open the device 8 hour a day, and 1 bubble / secend, it will last about 30 days. You can refill it every month. I think the device is enough for a 75 gallon tank, You can adjust the gas output according to the growth of the plant. Besides, if you don't have a CO2 diffuser, you can choose the G500 blue, the G500 green on don't have a diffuser.

[@maheshwaranparamasivan5177]

Can I use a solenoid valve to switch on and off at specific times? Do you also sell them?

[@Clscea]

Yes, you can use the Clscea quick plug solenoid valve to switch on and off. www.amazon.com/dp/B08YN3FPJC?ref=myi_title_dp&th=1 ASIN: B08YN3FPJC

[@franko1642]

@@Clscea this solenoid valve should go in the output right? therefore the white switch wouldn't be necessary, correct?

[@Agnus78]

Yeast and sugar are cheaper and produce the same result :) And they can be used in 1 bottle setup.

[@Clscea]

2 bottles CO2 setup will be much safer and the bottle pressure can be controled, and use longer.

[@newemail4917]

​@Clscea don't be mad someone suggested something that invalidates your product you're selling for 10x more. Make a better product vs trash or lower your price

[@Clscea]

We respect your choice. Different things have different prices. Thank you.

[@vichope6408]

@@newemail4917 what a fussy customer

[@gallardo20000]

I actually use this system with yeast and it works great for regulating the pressure with the needle valve. I fill up both bottles with sugar and yeast and it gets me over a week of usage at high co2 levels.@@newemail4917

[@LK-750]

It is safe or not If i turn off at night..do i need to release the pressure in a bottle a first..??

[@Clscea]

Just simply turn it off, it is safe.

[@102498rchale]

Should I hear hissing from switch valve?

[@Clscea]

No, When connected properly, the on-off valve does not hiss. Please email the after sales for help. [e-mail]

[@Jess-iq1bw]

My testing tube didnt come with a cap and now all the citric acid is mixed with bottle b.

[@Clscea]

Dear, Many customers complain the cap of the tube is useless, some costomers close the cap when they put the tube into the bottle.So our later upgrades came without the cap. So please don't worry about the cap. The tube should be open when it is thrown into the bottle B. It should be mixed with baking soda in the bottle B. In this way, it can achieve its function and achieve the starting pressure.

[@Jess-iq1bw]

Thank you

[@nmmedicalmalad8892]

is it available in india

[@lars6870]

Why have you installed that switch valve while you already have a needle valve?

[@Clscea]

After using the needle valve to adjust the gas output, it is best not to move it frequently, and if you need to switch on and off every day, you can control it only by the switch valve. This is more convenient and time saving.

[@kavindaranaweera8228]

How many days can use this bottle

[@PickleRickno.1]

Exactly 3.6 days

[@Clscea]

If you open 8 hours a day with an output of one bubble per second, you can probably use it for 30 days.

[@Kalimatullah_Yoh1-1.14]

The output is not consistent after some period of time?

[@Kalimatullah_Yoh1-1.14]

@@PickleRickno.1 3.6?

[@aswint2506]

@@PickleRickno.1 3.6 ?? wtf bro

[@kevinnguyen8822]

If pressure go higher. How do I do thank

[@Clscea]

Don't worry, it equipped with a safety valve that automatically relieves pressure when exceeds 4 kg/cm².