I unbox and review my FIRST CO2 system. AND I LIKE IT! ZRDR CO2 isn't bad at all! Amazon Affiliate Link to CO2 system : amzn.to/3X69Z8a Citric acid: amzn.to/3vUUgwP Drop checker: amzn.to/3ivxpF4
Пікірлер: 262
@gailbyrd85687 сағат бұрын
I must tell you that I've been debating co2 for about a year..fighting algae, melting plants etc throughout the year.. I came across your video and you got me over the fence! I just hooked up my zrdr 4l today! I was super nervous to add the water into the canister but with ur tips...no problem, no leaks! Now I just need to wait until the a.m. to make sure all is well! Thank u!!
@ssaquascapes7 сағат бұрын
Awesome. Glad the video helped you out and if you want to see a little more info, I also have a follow up CO2 video on the channel. You’ll find it in the video list. Happy CO2ing! 🤘🤘🤘
@gemtwist76 ай бұрын
Thank you for your plain and simple videos. I’ve been nervous about jumping into CO2, so all these years I’ve kept low tech plants. Recently someone was getting out of fish keeping and I purchased a lot of her stock, including plants and decor, and she “threw in” her 20ml ZRDR CO2 generator. It’s been sitting around the house for a few months and it wasn’t until I saw your videos that I finally got it up and running last week. So far so good. Setting this up really wasn’t as scary as it sounds, but I know I wouldn’t have been able to do it without your help.
@ssaquascapes6 ай бұрын
So awesome to hear that! I am ecstatic my video inspired you to give it a go. I appreciate you taking the time to tell your story and the compliments on the video! Happy CO2ing! 🤘
@jamess5872 Жыл бұрын
A few tips to get a stronger reaction and more c02. The idea mix is 1:1.3 soda to acid so 420g of soda to 600g acid or 600 to 780 (tank safety valve is 70kg so this mix should be fine but try the smaller mix first if you wish to play it safe). Also stir them together instead of just dumping in each part, it will make for a better reaction. Lastly use ice cubes instead of water so the reaction doesn't happen instantly and you will have ample time to attach the top. Only issue with using ice cubes is it will take a day for the complete pressure to build unless you warm the tank. Hope this helps!
@ssaquascapes Жыл бұрын
Awesome information! Appreciate you sharing for me and all others that see this comment.
@budiawan1784 Жыл бұрын
I dont know it will work for you or no, but you can use plastic to put citric acid + soda other way just to pour citric acid + soda directly to water This way will give you a lil time, enough time to close tigh the valve, water Cons : you have to seek plasctic and take it out when refilling and cleaning your tube.
@quadzilla26b5 ай бұрын
Can do the same mix in a 2L bottle?
@ssaquascapes5 ай бұрын
@quadzilla26b no. It will be too high of a reaction.
@quadzilla26b5 ай бұрын
@@ssaquascapes it actually works! Iv done it on a 2L this week!
@kens3dandaquatics Жыл бұрын
Also when initially charging your lines (like the start of the day) it will take a minute or 2 to get the pressure to build to get past the diffuser, meaning the bubble counter is null until you actually have co2 passing through the diffuser which is when you adjust the bubble counter
@ssaquascapes Жыл бұрын
Great tip. I learned this as well. The drop checker takes forever to react as well so it’ll take a day or two in order to dial it in perfectly. Thanks for adding this tip Ken!
@LeotsinidisN13 Жыл бұрын
900ml=0.9kg in weight. weight your ice on your scale. Remember that 0.9of ice is slightly more than 900ml so do not measure volume, choose mass is easier
@ssaquascapes Жыл бұрын
Excellent. Thank you. I did learn quickly from viewers that a ml is equal to a gram. I am a math idiot for sure. 🤣 I appreciate you taking the time to offer this suggestion. Thanks for the support! 🤘
@MrSwifty217 ай бұрын
And this is why the metric system is vastly superior 😂
@ssaquascapes7 ай бұрын
Beginning to agree with you the more I use it on this hobby. 🤘
@EricrutledgebetterАй бұрын
Or you could make it real easy. Since the density of ice is roughly the same as liquid water. Fill a jug with 500ml of water and fill it with ice until 1400ml. Pour the ice in and leave the water behind. If some ice melted just pour until the jug reads 500 ml. Life isn't that complicated.
@Mikinct6 ай бұрын
Great video. 1) How long does this system last before needing to replace ingredients? 2) does drop checker turn back to Blue each morning when no c02 pumped into tank? 3) how long does it take to get your drop checker to turn from blue to green? 1/2 hour, 1 hour, 2 hours?
@ssaquascapes6 ай бұрын
Thank you. 1) 3-4 weeks depending on BPS. 2) Most drop checkers will remain dark green - blue green overnight. 3) Depending on BPS and aquarium size; roughly 2-3 hours. Pro tip: set your smart socket or timer to have the CO2 turn on 3 hours before lighting once you’ve dialed in your co2 BPS. Off 5 hours before lights. I found this to be the best cycle.
@Geezer_-_js3kg4zg3w2 ай бұрын
If you start with a volume of water, say 400 grams and freeze it, the volume will change but the weight will remain the same.
@ssaquascapes2 ай бұрын
::::lightbulb moment::::🤣🤣
@kavinkhaluannguyen97092 ай бұрын
I make mine by mixing the water with citric acid first and put baking soda in a dissolvable bag then stuff the bag in the canister. Takes about an hour for the bag to dissolve but you don’t lose any gas. It’s a bit of an overkill.
@ssaquascapes2 ай бұрын
That’s just….sweet! 🤘🤘 Link to bags? Do you get any residue/crystals in the bottom with this method?
@chrisroug Жыл бұрын
Great vid thanks! 900ml of water = 900 grams.
@ssaquascapes Жыл бұрын
Glad you liked the vid! And thanks for the conversation. Easy enough!
@MylesBogner Жыл бұрын
Yeah, I was going to mention the same thing . 😂 metric is amazing.
@davidshepherd44106 ай бұрын
A brilliant informative video the likes of which you rarely see on You Tube, based on the video I'm getting one Dave the Brit
@ssaquascapes6 ай бұрын
Thank you. I appreciate the support! 🤘
@johnnynewburgh9745 Жыл бұрын
Nice job SS thank you for your time I am just setting up my co2 generator. Bonus feature nice job on the kitchen looks great just noticedd because i have redone mine
@ssaquascapes Жыл бұрын
Thanks! Glad you enjoyed the vid. I can’t take any credit for the kitchen though, we bought the house after a fresh remodel so it was already done! 🤣 I appreciate you noticing though!
@PizzaPaysMyBills15 күн бұрын
Pro tip for anyone watching… water weighs the same in grams as it measures in ml
@ssaquascapes15 күн бұрын
I had to learn metric after this video. 🤣🤣
@awel697 ай бұрын
So i bought this kit after watching your video. and after watching this and reading reviews i never expected to build 400psi. I used the 600g of Citric Acid and the 600g of Baking soda, and 900ml of water as per directions. I let it sit for 4 days with the solenoid off. i was away from home for those for days and i didnt have an auto timer. Well i came home and the sucker was at 550psi. the safety valve is rated for 70kg but i dont trust the tank enough. So i bled off 100psi.
@ssaquascapes7 ай бұрын
I’ve been told is possibly my brand of baking soda that is causing a lower reaction; something about a caking agent or anti-caking agent. However, the cylinder itself is rated for way higher pressure than you will ever build in the system so don’t worry about an explosion. The cylinder should hold up and the safety valve would be what fails first.
@awel697 ай бұрын
@@ssaquascapes have you ever tried a higher quality regulator on the ZRDR tanks? And the baking soda I used is the boxed kind.
@ssaquascapes7 ай бұрын
I have not tried a different regulator. These seem proprietary as the screw into the neck of the bottle. Haven’t seen any aftermarket regulators that have the same design.
@ljmarik5 ай бұрын
@awel69 or @ssaquascapes - how are you bleeding the system? Could you explain or do a video? Mine is at 500psi after 24 hours of setup and I am getting a bit worried on how to release pressure.
@ssaquascapes5 ай бұрын
@ljmarik To answer your question: I would plug the solenoid into power and just open the needle valve to bleed pressure to the atmosphere (no co2 tubing on bubble counter). But read on!! There is no need to worry for your situation. It seems people using a better brand of baking soda are seeing a higher pressure. Think of this as a BONUS! The safety relief valve is set to blow out at 600 PSI (approximate) so you don’t need to worry about a catastrophic failure. This valve is the screw looking thing on the back of the regulator. I see different pressures based on different brands of ingredients, inaccurate measurements, barometric pressure, humidity, etc. nothing to worry about at this time. Enjoy the extra 100psi. 🤘🤘
@weedie4209Ай бұрын
I laughed a lot while learning. Great video!!
@ssaquascapesАй бұрын
Thank you! 🙇♂️
@snaggy138 ай бұрын
Good video! Ice water is a good idea. When in doubt, just measure everything, including water, by mass. No familiarity with these systems at all, but makes sense from a chemistry perspective. Interested in starting the hobby and looking at what setup cost would be overall. I have a 10gal tank at home, and a 30 gallon at work.
@ssaquascapes8 ай бұрын
Starting out, I’d recommend focusing most of your money into plants. The plants are the key to an algae free aquarium. Lots of plants. You can go with a low cost internal filter for the 10G like Hygger which is quick and easy to clean. A basic aquasoil like Mr. Aqua aquarium soil will do the job for substrate. To further lower the cost, go out in nature and collect your stones and driftwood. That’s all there is too it! 10 G Filter:amzn.to/3Rz7ud3 Aquasoil: amzn.to/4aAcBCE
@snaggy138 ай бұрын
@@ssaquascapes Thank you so much!
@budiawan1784 Жыл бұрын
Good equipment for diy CO2 system The Bottle look like SS (corrosive free) But i think, the best system is yourself.
@ssaquascapes Жыл бұрын
They are SS. Work pretty well so far.
@LushSaltyAquariums Жыл бұрын
Thanks, friend. Appreciate the reality of your presentation.
@ssaquascapes Жыл бұрын
Thank you! I appreciate you watching and I’m glad you enjoyed the video! Thanks for the comment!
@zakerymunoz383710 ай бұрын
Just got one of these. The instructions are pretty minimal. Thanks for making the video.
@ssaquascapes10 ай бұрын
My pleasure. Thanks for checking out the vid. I have a follow up video as well if you need a little more info. kzbin.info/www/bejne/n3vafGaYaNiDmdEsi=eqyiejCyED0iaaA_
@infamousgook Жыл бұрын
Dude youre awesome!! Ive been wanting to co2 my tank forever and ran into this kit on Amazon but was scared to try it. After watching this video and your updated video on it, I just purchased the same kit! Excited cause I am struggling to grow a carpet of monte carlo and i hope this was the missing ingredient i needed.
@ssaquascapes Жыл бұрын
Thank you. I appreciate that! Glad the videos helped you make a decision. Monte Carlo likes CO2 for sure. Mine didn’t grow until I put it in a tank with CO2 so hopefully you have the same results.
@infamousgook Жыл бұрын
So I got mine in and set it up 2 days ago. I woke today and checked the psi inside the tank and the meter is maxed out!! Yesterday it was only at 250 psi. Any idea on if I need to do anything? I mixed the correct amount and gave it a swirl just like you did in the video.
@ssaquascapes Жыл бұрын
What psi? Over 400-440? I’ve never had mine max out the pressure gauge. That would be 600 psi. It’s possible you have a faulty gauge if your gram measurements are correct. There is a safety valve that will pop if the canister is over pressure so if it hasn’t yet, I guess I’d just run the system and see what it does on the next refill. If same pressure result than it must be an inaccurate gauge if measurements are correct on the ingredients.
@infamousgook Жыл бұрын
@@ssaquascapes it's sitting at 580 or so. 600 psi is the max on my gauge.
@ssaquascapes Жыл бұрын
There was another commentor on either this video or the other one that said he gets almost 600 psi, but is increasing his ratio of ingredients. That being said, I think safety wise, you’re OK, I don’t think the bottle is going to explode. However, don’t take my word for it and I’m not responsible for it, (disclaimer). I would just give it another shot after this one is used up and see if you have the same results. If so, and you want to play it safe, decrease your ingredients by 20%. I guess you got a really good swirl, and the entire reaction fired off at one time.
@FinnRenard6 ай бұрын
Metric system for the win :) 900 ml of water is 900 grams of water.
@ssaquascapes6 ай бұрын
Yup learned that real fast. Much more efficient
@justinbang965 Жыл бұрын
This design seems ideal for my situation. Though I wonder if the acid will corrode the canister after awhile.
@ssaquascapes Жыл бұрын
I have had no issues with corrosion as it is stainless steel. There is a follow up video on the channel if you’d like to see more. DIY Co2 Generator for Aquariums | All you need to know | 4 Month Review. Zrdr Co2 Generator System. kzbin.info/www/bejne/n3vafGaYaNiDmdE
@SADUTTAQUARIUM6 ай бұрын
Saya belajar banyak darimu.. Video ini begitu bermanfaat. Saya berlangganan disaluranmu 🙋🏻♂
@ssaquascapes6 ай бұрын
Thank you. 🙏
@akifhafie8561 Жыл бұрын
For the price of this I could get a pressurized system made of recycled fire extinguisher tanks. But the ease of refill is my biggest concern, I haven't been able to find anywhere that would refill my tanks. A reactor like this is going to be 100 times easier to refill. Question is, how does this measure up to a pressurized system? How long would one tankful last for?
@akifhafie8561 Жыл бұрын
Also I can't believe I haven't thought of counting 1-thousand-1 1-thousand-2 to determine how many bubbles per second. Thanks for the tip!
@ssaquascapes Жыл бұрын
I have had no experience with a regular pressurized CO2 system so I could not speak of comparison unfortunately. Depending on use this DIY system can last between 1 month and 3 months. I actually did an detailed update video on these systems recently. I have 3 of these and show you the pros and cons. If you’d like to check it out, here is a direct link kzbin.info/www/bejne/n3vafGaYaNiDmdE or you can find it in my video list titled “DIY Co2 Generator for Aquariums”. Hope that helps you make a decision on these systems.
@akifhafie8561 Жыл бұрын
@@ssaquascapes actually after thinking about it, who cares if it doesn't last as long as a regular pressurized system. The ease of refilling makes up for it. Just pop off the cover, fill in the reactant stuff, pop it close again, and bam you're back in business. With pressurized system even if I could somehow find someplace to fill it back up, I still gotta take the time of the day to drive up there and drive back home again. So yeah still worth it I think.
@ssaquascapes Жыл бұрын
Exactly. I love just ordering citric acid and baking soda from Amazon, it shows up at home, and I just make CO2 when needed. Takes about 5 minutes once you have done it a few times. If you do get one off Amazon, I think I have a quick link in the description. 🤘 Thanks for the support!
@sleepytasmrАй бұрын
I'm worried about the suction cap losing it's suction on the drop checker fluid and getting into the tank.
@ssaquascapesАй бұрын
No worries. It’s not toxic and I have not had one come loose.
@jamjokes38008 күн бұрын
👍
@ssaquascapes8 күн бұрын
🤘
@metalhead98495 ай бұрын
I thought you might be interested that Walmart has Borax baking soda in the pool supply section. 10 pounds for 12 bucks.
@ssaquascapes5 ай бұрын
Sounds like a deal! Thanks for sharing! 🤘
@MyVantasticLifeVoyage9 ай бұрын
I’m wondering why the bass isn’t eating the smaller fish or does he and just isn’t hungry? I used to keep a bass that size when I was a kid and he would eat anything he could get into his mouth.
@ssaquascapes9 ай бұрын
He knows his buffet can’t swim off and eats at his leisure. He’ll eat a few every night; his favorite time to hunt.
@johndoe33283 ай бұрын
FYI: 900ml of water = 900 grams. So you can simply use a scale and weigh out 900 grams of ice.
@ssaquascapes3 ай бұрын
Yes. God bless the metric system
@LivinginHongkong14 ай бұрын
Got my 1 litre yesterday and reached 200 in 1 hr then finished at 350 i used warm water, i was just very quick with locking in
@ssaquascapes4 ай бұрын
Seems about right. Probably lost a little reaction with the warm water. For max results/pressure a subscribed said to use ice instead of water. Works really well and this is the method I use now to get 400 psi every time. No loss of gas! 🤘
@LivinginHongkong14 ай бұрын
@@ssaquascapes ill have to put water in fridge and do it next time and see difference, really good kits considering its 35 usd.
@ssaquascapes4 ай бұрын
@asustransformer28 I agree on the value!
@gordr80244 ай бұрын
You need to mix, the proper way to add chemicals is water first then chemicals the water stops the reaction from creating heat or fire depending on the chemicals, I work in the chemical industry and when we mix large batches this is what we do water first, it also contains the powder due to the moisture.l, and yes mix you will have clumps of powdered chemical if you don’t
@ssaquascapes4 ай бұрын
Doesn’t work in this application. You don’t want the reaction to start (water is the catalyst) before you can get the cap on. You want to trap the reaction. You mix chemicals that way to avoid severe reactions that can be dangerous. We actually WANT the rapid reaction. 😉
@ssaquascapes4 ай бұрын
@gordr8024 can you take a video of you adding the powder baking soda and citric acid mix to the cylinder of water? My email is in my bio. Thanks Also, I am under the impression that a catalyst is a substance that increases the rate of a chemical reaction without itself undergoing any permanent chemical change. Since the water never changes from his physical or chemical property, I would assume it was the catalyst.
@nathanhoveyaquaticsАй бұрын
I forget the liter size but it's 200 grams of dry n 300ml water and I actually do the acid 1st and I get like 50/75 more psi than it claims I should. What size tank have you ran this type of system on ? I'm running it in a 20 gallon but it only last a couple weeks at 1/2 bubble per second. I don't know if that's normal or not.
@ssaquascapesАй бұрын
Yeah, it will only last a few weeks at 2 bps. It’s normal based on my testing.
@437johnl Жыл бұрын
Looks like a Petsmart tank, Mine is also a Petsmart 29 gal. I can tell by the fat rim and black silicone. I really like the black silicone it looks better than the clear silicone. Thanks for your videos.
@ssaquascapes Жыл бұрын
Thanks! Glad you’re enjoying the channel content. It is a Marineland (PetSmart) 75g aquarium and stand combo.
@437johnl Жыл бұрын
@@ssaquascapes I was close. I also have a marineland 10 gal half-moon that's 10 years old with a betta in it, still in excellent shape. wish I could send a pic.
@ssaquascapes Жыл бұрын
Photos can be sent to my email at ssaquascapes@gmail
@437johnl Жыл бұрын
I am
@ijl-cy9pp Жыл бұрын
Hi thanks for the video. I have a similar system, should there be an o-ring in the cap for the bubble counter? I mean the but you unscrew in order to fill it with water? I have air leaking from there but I can't see any damage. Thanks!
@ssaquascapes Жыл бұрын
I have 5 of the screw top bubble counter’s and the ones I have DO have a flat o-ring to seal it. Here is a direct link to the screw cap ones I use. Note the o-ring on picture 3 I think. amzn.to/44xzRgW
@argentimaginationjewlery60203 ай бұрын
Put the water on the scale then use the same weight of ice.
@ssaquascapes3 ай бұрын
Good idea!
@asifali0079 ай бұрын
i assume pressurized co2 clyinder with solenoid are way cheaper and less hectic than this one
@ssaquascapes9 ай бұрын
Thanks for watching and commenting. I’m actually testing pressurized liquid CO2 vs this system as we speak. A long experiment for a video. Stay tuned for the video release stating the results! 🤘
@heaven73603 ай бұрын
The Fzone system has a built in check valve. I didn't know that and attached a regular check valve and the CO2 wouldn't pass through it without cranking the needle valve up full blast.
@ssaquascapes3 ай бұрын
Might have been a bad regulator. The check valve shouldn’t add much restriction unless installed backwards. 🤷🏼♂️
@johndavismit4 ай бұрын
Hey man. I just bought one of these CO2 systems (with dual gauges) I had a question for you. When you twist the black regulator knob as loose as it goes, does it come off? (Or should it stay on?) When I twisted mine as loose at it goes, it came off the tank, and I was not expecting that.
@ssaquascapes4 ай бұрын
I’d return it. There should be a stop when you get to max adjustment. Mine don’t twist all the way off. Sorry you got a bad unit. If from Amazon it should be an easy swap.
@johndavismit4 ай бұрын
@@ssaquascapes Thanks for the head's up. I'll probably return it. I like your channel.
@ssaquascapes4 ай бұрын
@johndavismit thank you. Glad I could help.
@fishdreamz348 Жыл бұрын
Well done video. ❤
@ssaquascapes Жыл бұрын
Thank you. There is a follow up vid on the channel too if you’re interested. 🤘
@coffeeaddictgaming2883Ай бұрын
My regulator eventually leaked about about six month on one of these. I’m curious if anyone has fitted a more expensive regulator?
@ssaquascapesАй бұрын
I haven’t fitted a new regulator or had a leak so I am no help but hopefully the community will chime in. 🤘
@DavPlaGuiTarАй бұрын
How long does it take to fully pressurize the bottle until it’s ready to use?
@ssaquascapesАй бұрын
It’s useable in a few minutes as it’ll have enough pressure. Full 400psi within 12 hours or so.
@DavPlaGuiTarАй бұрын
@@ssaquascapes hmmm, mine (fzone 2.5L) has been sitting over 12 hours and the needle is still barely in the green. I used Amazon brand baking soda, maybe that’s the problem?
@ssaquascapesАй бұрын
@DavPlaGuiTar many people have commented that different brands do produce different PSI‘s. Millard brand from Amazon seems to work best for both ingredients
@Inthegrowroom Жыл бұрын
Adding ice rather than ice & water will delay the reaction until the ice melts
@ssaquascapes Жыл бұрын
Agreed. Now that I know how to measure it by weight, this could be done if desired.
@taint8136 ай бұрын
I'm trying to refill but my black filter tube won't screw into the regulator because it is too small and just falls into the canister when I try to screw the regulator on. Has anyone else had this issue?
@ssaquascapes6 ай бұрын
The black filter holder is plastic and screws into metal. So I have also noticed it to be loose but I have not had it fail yet. See if you can just stick it in there and maybe even super glue it in. once that filter is in the regulator, you have no need to remove it again.
@pasito6605Ай бұрын
Don’t know if you will see this i have the same system just a smaller version. Everything is the same and was working great 3bps but now i can not get more than .25 bubbles a second. If i raise the output of the co2 it just burst out the sides of the bubbles counter that is places above the co2 canister. and it is lost co2 i’ve tried for a few weeks and right now i just lost half my co2 tank trying again. any help ?
@ssaquascapesАй бұрын
Sounds like your needle valve is clogged. If you unscrew the needle valve all the way, you should be able to disassemble it and make sure it is perfectly clean. Blow out the hole, orifice, and reassemble. If that does not work, there is a clog somewhere else.
@suomursuliini6 ай бұрын
900g of ice is 900ml of water melted. One gram of water is 1ml. Metric is easy...
@ssaquascapes6 ай бұрын
Yup. Learned that shortly after. 😁
@fandyshadenio80226 ай бұрын
how is it today, is the co2 system still working? Is it recommended for the price?
@ssaquascapes6 ай бұрын
Still using all three systems as we speak. Haven’t had any issue with them except replacing the diffuser and check valve. If you don’t have access to liquid co2 filling stations this system is worth the investment
@Pickled4733 ай бұрын
Use the metric system, 900ml of water = 900 grams of ice
@ssaquascapes3 ай бұрын
Thanks! 🤘
@tonydeschryver46828 ай бұрын
Informative video, thanks
@ssaquascapes8 ай бұрын
Glad you enjoyed it.
@tonydeschryver46828 ай бұрын
Looking for one right now.@@ssaquascapes
@fandyshadenio8022 Жыл бұрын
the size of soda and citrun 600g how long can it last?
@donttalktome4696 Жыл бұрын
I've been running a smaller one (2.5l). 200g of each has given me three weeks of 1bps with no noticeable movement on my gauge. I have read that a 200g reaction will give approx ~90-120 days at 1 bps
@ssaquascapes Жыл бұрын
I will be doing a follow up video. But, now that I learned how to get 430 PSI when I make a batch, I will see how long it lasts. Currently it is on a 75 gallon (300L?) tank at 3 BPS. Needle hasn’t moved much in a week. Still over 400 PSI. I also have two of the 2L versions and love them as well. After a month of use with ZRDR systems, I think they are worth getting 100%. I’d buy again for sure.
@fandyshadenio8022 Жыл бұрын
@@ssaquascapes ok we will see,because I'm interested in the tube, but I have to see first how long it can work in one time, mix the cinnamon soda per 200g .
@airboy5215 күн бұрын
I also bought 2 gadge version but I am not sure it is really necessary or not😂
@ssaquascapes15 күн бұрын
Not NEEDED on this unit for sure. I have a follow up video on the channel here: kzbin.info/www/bejne/n3vafGaYaNiDmdEsi=7ghuNfpq7vnFGXhs
@zangelov62983 ай бұрын
900ml = 900 grams of water and 900 grams of water = 900 gr of ice
@ssaquascapes3 ай бұрын
Thank you. 🤘
@WesCrockettCA10 ай бұрын
Hows the unit holding up? I have a tiny little tank that I want to introduce CO2 to so I am looking at the 2L one. Would you still recommend this system?
@ssaquascapes10 ай бұрын
I would. There are a few quirks to watch out for, but I am still using all three tanks to this day by ZRDR. Here is a follow-up video I made discussing things to consider with these systems. kzbin.info/www/bejne/n3vafGaYaNiDmdEsi=bIl8N_XcrPLBgxCQ
@WesCrockettCA10 ай бұрын
@@ssaquascapes Thanks! I actually found that follow up video and ordered the 2L model. They do offer the 2L model with double-gauge now, for about $20 more... Since i'm just running a 3g tank, i'll be doing 1bp3s or so, I figured the second gauge wouldn't be necessary due to such a slow drain. How long do you think one mix will last at that slow depletion?
@ssaquascapes10 ай бұрын
I get about 3 - 4 weeks at 1bp3s. You should be happy with the performance. Congrats on the purchase. 🤘
@Gold_87 Жыл бұрын
Heyo, thanks for this great info! Got 1 question, can I use a inline diffuser with this system?
@ssaquascapes Жыл бұрын
You should be able to use any inline co2 diffuser. From my experience they all have an airline IN connection where you would connect your co2 line or air line. 🤘
@traceelements1965 Жыл бұрын
Can this setup be used in a grow tent,what else needs connecting to convert it to suit use in a tent etc?
@ssaquascapes Жыл бұрын
I have no experience with a tent setup. I couldn’t weigh in on that topic with any confidence, sorry. It is a low PSI system (400 PSI max) so keep that in mind for your setup.
@baileycrawford7427Ай бұрын
Does the air check valve go right on the bubbler in the tank??
@ssaquascapesАй бұрын
No. Check valve above the water line as near the diffuser (bubbler) as desired. Most insert it in line behind the tank.
@dADAquaHobby10 ай бұрын
2L system in your country is around 100$, but in India they are selling it for 275$, very sad.
@ssaquascapes10 ай бұрын
Yes I see the price has come down since I made the video. Can you shop on Amazon USA and pay for the shipping to India?
@dADAquaHobby10 ай бұрын
@@ssaquascapes ya this is so cool, Thanks
@Aquahalic9 ай бұрын
Like 200 in Canada 😢
@justinschmitt58883 ай бұрын
How do you clean out the left over residue in the bottom of the canister?
@ssaquascapes3 ай бұрын
Hot water rinse a few times.
@vichope64088 ай бұрын
Hello sir, how long does it take for the co2 to change colour and how long is the co2 last? Thanks
@ssaquascapes8 ай бұрын
Your drop checker should change color in about an hour. But, start slow and increase every few hours on startup if you have livestock in the tank. You don’t want to gas the tank as the drop checker is delayed. Co2 longevity will depend on how large the tank is and how much co2 you’re injecting. The bottle could last 3 weeks or 3 months based on those factors.
@vichope64088 ай бұрын
Will i able to install splitter on this model?
@ssaquascapes8 ай бұрын
@vichope6408 yes I run splitter on these units.
@RichieRich8457 ай бұрын
How many weeks this last? Have you tried Yest or citric acid is better?
@ssaquascapes7 ай бұрын
For me, the 4L system last about five weeks. The 2L system lasts about three weeks. I have not put sugar and yeast in the system as it is designed for citric acid and baking soda.
@RichieRich8457 ай бұрын
@@ssaquascapes thanks, just watching your 4 months review
@ssaquascapes7 ай бұрын
I appreciate it! 🤘
@r.in.shibuya Жыл бұрын
Can you refill 12g refillable co2 cartridges from that tank? ( assuming you get the charging needle adapter)
@ssaquascapes Жыл бұрын
The max pressure I can get on this generator is 400psi. From my experience with 12g co2 cartridges, they normally hold around 1000 psi of pressure. The system in this video would not produce enough pressure to fill the cartridges to a useable level as they would not even be half full. I also believe they use liquid co2 to achieve the continuous pressure in that small of a cartridge. This system is all gas co2. So, I don’t think you would have any success at all.
@r.in.shibuya Жыл бұрын
@@ssaquascapes thanks for the confirmation.I though that would be a possibility! Very unfortunate for my use case though.
@MrCannaGro42011 ай бұрын
I have the 2 liter version how do you now when to change and when it’s empty the instructions suck
@ssaquascapes11 ай бұрын
I just wait till the needle on the gauge is at 0. There will always be a little pressure left when you open but not enough to worry about.
@michaeltruesdale22849 ай бұрын
Okay but I'm not wanting to use it in my water I'm wanting to add the co2 to my grow tent
@ssaquascapes9 ай бұрын
Don’t think it has enough volume for that. But you can try. 😁🤘
@TonyettaPerry81310 ай бұрын
Is there anything else I need to make this system function properly other than a timer for it to kick on and off on schedule? Kind of confused about the plug in thing.
@ssaquascapes10 ай бұрын
You will need: Baking Soda, citric acid, and an outlet timer if you want to run the system automatically on a timer. Other than that, the kit comes with all the parts you need.
@TonyettaPerry81310 ай бұрын
THANK YOU!
@TonyettaPerry81310 ай бұрын
And I called myself reading the instructions and now I have filled the cannister and capped it with no filter on it.
@ssaquascapes10 ай бұрын
🤣 It’s ok. Just don’t shake the bottle and you should be fine. Just add filter the next time.
@alejklsanchez83602 ай бұрын
Hola si era un repuesto el filtro? O se tienen q piner los dos? (Las cosas blancas) Gracias
@ssaquascapes2 ай бұрын
Came with the kit. Both required for filter.
@alejklsanchez83602 ай бұрын
@@ssaquascapes si el mío lo trae también pero mencionas en el vídeo q trae 2 filtros y q una era repuesto si era repuesto o se ponen los dos una afuera y una adentro?
@alejklsanchez83602 ай бұрын
Minuto 10:30
@ssaquascapes2 ай бұрын
@@alejklsanchez8360 In the video I was wrong. Put both white filters in the black holder. This is how I have mine.
@alejklsanchez83602 ай бұрын
@@ssaquascapes ok ok esa era mi duda el orificio q trae hacia donde va dirigido?
@rolandyockkim67886 ай бұрын
Is this CO2 system sufficient for a 55 gallon aquarium?
@ssaquascapes6 ай бұрын
Yes. I have it on a 75 gallon aquarium. You’ll just have to fill it a little more often than on a small aquarium.
@437johnl Жыл бұрын
Looks like you have hygger lights also. Do you use the 24/7 feature or timer 8/10/12 h?
@ssaquascapes Жыл бұрын
I run all Hygger lights. 8 in total. Some have only the 24/7 - 8/10/12. Those ones I run off a electrical socket timer. 100% intensity on the lights, 6 on/6 off/6 on/6 off. The other lights have a fully automated smart controller built into the light. And are set on the same 6/6/6/6 schedule but the light controls it. I USED to run the lights on the built in timer at 12 hours. But I am playing with lighting currently for maximum plant growth and algae control.
@jamesamatore8717 Жыл бұрын
Trying to find this on Amazon prime day. Would you please help an old guy and send me a link. Have a 65 gallon tank.
@ssaquascapes Жыл бұрын
James, The link to the product on Amazon is in the description section of this video. If you’re on your phone, click “more” under the video title and you should see the Amazon affiliate link for the CO2 system there.
@mahmoudm.s.dwaikat14822 ай бұрын
Do you think this can be used to make carbonated drinks?
@ssaquascapes2 ай бұрын
I have no knowledge base on making carbonated drinks but I imagine a machine like “Soda Stream” would be much simpler.
@mahmoudm.s.dwaikat14822 ай бұрын
@@ssaquascapes You are right, however, the CO2 canisters are hard to replace and run out quickly. The idea here is to replace the CO2 canisters with some more reliable and available source, like those baking soda and citric acid.
@ssaquascapes2 ай бұрын
I see. We’ll keep in mind the pressure of this system only reaches 400psi and will decrease with use. I don’t know how much pressure a soda machine needs to carbonate water. But, I have recently switched to liquid CO2 canisters from a local air and gas company. A 5 pound bottle has lasted me months. Might look into a traditional CO2 system and regulator for aquariums in order to maximize your liquid CO2 use. The pressure remains constant until the bottle is empty vs this system.
@mahmoudm.s.dwaikat14822 ай бұрын
@@ssaquascapes so, 600 gm of both materials gives you 400psi, this very great, in soda machines it uses nearly 40-50 psi to infuse co2. The liquid co2 is better for dissolving it in water.
@ssaquascapes2 ай бұрын
Correct.
@RustyZones10 ай бұрын
were are the plants in your aquarium? u need to heavy plant the aquarium mate.
@ssaquascapes10 ай бұрын
One of the first vids on the channel. Check here for an update. 😁 kzbin.info/www/bejne/m4KwXoefqpucgZYsi=7LT9Y2ZAUntixj7G
@jeffrey13347 ай бұрын
You didnt count for the weight of the cup you used.
@ssaquascapes7 ай бұрын
I hit tare and zeroed the cup.
@samstipt67146 ай бұрын
wil it be possible to fill this with dry ice?
@ssaquascapes6 ай бұрын
No idea and I have no advice for that application.
@437johnl Жыл бұрын
my timer control is built into the light, can I just turn off co2 manually or use an external timer and time it to the light timer, what a pain.
@ssaquascapes Жыл бұрын
If it is the 4 button controller you can just put it on a timer. It’ll turn on to last dim setting when it regains power. If it has the led screen Smart Control, then no, an external light timer won’t work. It won’t turn on until you set the clock on the controller.
@aquasquare Жыл бұрын
Nice 👍😊
@ssaquascapes Жыл бұрын
Thanks!
@okantutaman9377Ай бұрын
what size is that generator?
@ssaquascapesАй бұрын
This is the 4L.
@garyking2480 Жыл бұрын
i didn’t get 2 of those hard filters with mine. i had one hard filter at the bottom and one soft cotton like filter that went into the tube. i think they left something out of my kit. also, my c02 hand meter will detect c02 coming out of the line if i put the line “hose” right up to the hand meter but it’s like the tank won’t fill up the room because i can leave it turned up real far inside the grow tent and it won’t detect it. idk if i did something wrong or if the meter is just bad. scares me thinking the meter is bad because i don’t wanna mess anything up and get hurt from c02 poisoning. i’ve got to get another meter i guess
@ssaquascapes Жыл бұрын
Oh, you’re using it in a grow tent for atmospheric CO2. Yeah, this is probably too small of a system to see any concentration in a room. But I still advise you use caution as it appears you are. Other than that, I couldn’t offer much advice of tent CO2 setups as I have zero experience there.
@nithinraj9772 Жыл бұрын
Can we add a separate needle value for which and the regulator?
@ssaquascapes Жыл бұрын
The needle valve only controls the bubbles per second,or co2, going into the airline. The pressure regulator limits the pressure from bottle to needle valve. So you do have two valves to control pressure on the 4L size system (the one in this video). The 2L size system has only a needle valve that holds back all 400 PSI. BUT, you can fit a 4L regulator on a 2L bottle which I may do later (I have two 2L kits). You can buy the 4L regulators separately. Hope that helps.
@nithinraj9772 Жыл бұрын
Lowest bubble count that can be tuned? Can it be tuned for 1 bubble for 4 seconds. Because most of the budget friendly regulators have these issues .
@ssaquascapes Жыл бұрын
On my 5 gallon tanks I have 1 bubble per 3 sec. You can get slower bubble counts but when tank pressure drops, needle will have to be readjusted to maintain flow.
@nithinraj9772 Жыл бұрын
@@ssaquascapes thanks a lot . This helps a lot as I am trying to buy for my nano tank
@ssaquascapes Жыл бұрын
I do recommend them. So far I am very happy with all 3 systems I have from this brand.
@hurdurdur7rl69619 күн бұрын
900ml of water is is 900g
@ssaquascapes19 күн бұрын
Yep, I have learned this since this video. Appreciate the watch and the comment. Cheers.
@Darek_WRK10 ай бұрын
Can I use yeast + sugar + water in this generator?
@ssaquascapes10 ай бұрын
I have thought about this as well. My answer, to be safe, is no. They are not designed for yeast/sugar. I would have to experiment with it to see if it can be done and get the measurements correct so it didn’t bubble over into the regulator. Maybe worth a video some day. Heck, try searching KZbin. Maybe someone has done it already. 🤷🏼♂️
@Darek_WRK10 ай бұрын
Theoretically, there is no such pressure there, until recently I used one 2-liter Coke bottle with 1 liter of water, a teaspoon of yeast, a glass of sugar and a teaspoon of soda. A syringe with linden wood as a diffuser. The bottle was always soft and the mess didn't go beyond the bottle. What do you think about it?
@ssaquascapes10 ай бұрын
I’m not worried about the pressure. These steel canisters can hold more pressure than you could create with sugar and yeast. My issue is that if it foams, and gets in the regulator, it would clog up the regulator. You were not seeing pressure on the coke bottle because you had little to no restriction to hold pressure back. If you just put a sealed cap on you would see pressure build up, like in these systems. Again, with the right measurements to prevent excess foaming, I am sure it could be done in these ZRDR systems. But, until I personally test it, I won’t put my name out there saying it’s ok because I don’t know for sure. 🤘
@cheeseballs3825 Жыл бұрын
How did this work long term?
@ssaquascapes Жыл бұрын
Pretty well. I did an update video. It’s in the video list. Title: “DIY co2 generator for aquariums”. Detailed review there of the 3 systems I own.
@romelljennings32037 ай бұрын
Can this work in a 4x8 grow tent?
@ssaquascapes7 ай бұрын
No experience with that. But it is only 400psi. I’d go with a liquid co2 system.
@luisalejandrobernardinojim64635 ай бұрын
The true measure, for every 600 grams of cítric ácid, you Will needs 785 grams of bakin soda,
@ssaquascapes5 ай бұрын
I’ll have to try it.
@DiscusRussell4 ай бұрын
@@ssaquascapes Have you tried it yet 🔥
@VicBeatz11 ай бұрын
How often do you change the blue liquid in the Co2 tester?
@ssaquascapes11 ай бұрын
I change mine when I feel it stops reading accurately. Maybe every 3 months. I look at it when I do water changes. Lower the water below the drop checker and it will be exposed to atmospheric air changing it to dark blue pretty fast (roughly 20-30 mins). If it doesn’t react that fast I change it out. Probably not the best method but it is my method.
@VicBeatz11 ай бұрын
@@ssaquascapes thank you sir
@PZPism Жыл бұрын
Yo How to I release pressure? My first valve is at yellow 😂
@ssaquascapes Жыл бұрын
I run it all the way down until there is no more bubbles in the bubble counter. Needle in red. Then twist the regulator off the bottle very slowly which will release the rest of the pressure. If you’re in the yellow and getting no bubbles. Adjust the regulator and needle valve to compensate for the lower pressure in bottle.
@FranciscoPauperio Жыл бұрын
1L of water is 1kg of water...
@ssaquascapes Жыл бұрын
Thank you. I am learning my metric measurements from all of you guys. It’s starting to make sense why everyone but us uses the metric system. 🤣
@warwickmilne31498 ай бұрын
900g of ice.... simple math
@ssaquascapes8 ай бұрын
I don’t math so gooder. 😛
@roryoconnor141110 ай бұрын
Did this guy just ask how to make 900 mL of ice like it was a fucking puzzle?! FML
@ssaquascapes10 ай бұрын
I did! Did it provide you with much entertainment? As this is the goal of YT. 😁🤘😁
@TonyettaPerry81310 ай бұрын
@@ssaquascapesgoal accomplished 😂
@ssaquascapes10 ай бұрын
🤣😛
@roryoconnor141110 ай бұрын
It did now 😂👍
@ssaquascapes10 ай бұрын
🤣sweet! Thanks for watching!🤘
@nenadlazarevskl437 Жыл бұрын
you king 🫡
@ssaquascapes Жыл бұрын
Thanks (I think) 😐
@flyingcat3170 Жыл бұрын
Too expensive
@ssaquascapes Жыл бұрын
Yes, it is an initial investment. But there are other CO2 options like the yeast method. Lots of videos on that on YT. I just prefer this method.
@Yolo-mz5yg11 ай бұрын
Lol . Your tank doesn't need CO2. Wasted money and time.
@ssaquascapes11 ай бұрын
Ah…but it does now. 😉
@DIARRHEA-PANIC Жыл бұрын
Seems like you skipped math class often..
@ssaquascapes Жыл бұрын
I did. I hate math. Useless for video production. 🤣🤣
@Autonomous_Don Жыл бұрын
Hey man I gave you a view and comment But this video was really poorly made Thumbs down Best of luck
@ssaquascapes Жыл бұрын
Thanks for the interaction. 🤣
@traceelements1965 Жыл бұрын
You watched the vid,was the sound up or DOWN,cause he mentions,hes not an experienced KZbinr lol
@dack454511 ай бұрын
Should of just used 900 g of ice bro
@ssaquascapes11 ай бұрын
Yeah, people schooled me on basic metric measurements pretty quick. 🤣 I do use ice on some refill now.