CLUTCH MOD - RAFFLE FZ1 GETS AN UPGRADE

[@rhetericalpha]

I hope parts come in so we can keep this progress going.

[@paulacarneciu7104]

You must install the last friction plate shifting half phase. you can see in the video when you dissasembled the presure plate.

[@pestoking2469]

Can you explain please I just did the clutch on mine

[@mechanicalman4531]

@@pestoking2469 its in the workshop manual, the very last friction plate you put in is supposed to be rotated by one notch when compared to all the others.

[@pestoking2469]

@@mechanicalman4531 I left the last one off and it’s working fine

[@yllib68]

Clutch video!!! Awesome. I'll be tackling that at the end of this riding season. Thanks for another great vid!

[@rhetericalpha]

The clutch is pretty simple with these bikes you should have it done pretty quick when you do it.

[@Dpo2203]

Hope you used the markings on the clutch case to line up the plates ? And the last plate moves over one phase .

[@ajw828]

Very informative video. I love watching these and learning how these bikes really work. Awesome work bro, keep it up!

[@rhetericalpha]

I love hearing that A.J!

[@rhetericalpha]

You know what I'm really doing, right? ... I'm preparing you for your own motorcycle purchase;)

[@ajw828]

Moto Gumption lol I wish!!!

[@ertanugur7383]

Thanks

[@stuartracing1]

I had Mine flashed by vcycle WOW..... What a big difference...

[@pepernoot4]

Hi Rickie, what can I aspect from such a flash? I already had mine on the dyno with a powercommander..

[@stuartracing1]

@@pepernoot4 Hey Stan...With a flash they can do so much more than they can with a PC, like changing timing maps,rev limits,secondary fly openings,deletes certain things...Once done you can still get it dyno`s to fine tune the fuel values if you think you need to.

[@pif693]

I need advice. I have a yamaha fz1n 2007 and the handle of my clutch is very hard. I changed the wire and again, what else to change or put to lighten my handle. My hand is very tired now.

[@mrboostification]

I got the same problem

[@pepernoot4]

Love the vids, I have an FZ1 Fazer '07. I've got a powercommander and its been on the dyno. Is this very different from an ecu flash? Or would it be even better to have both? Thanks in advance. Heard a lot about the flash guy on the Internet!

[@alchemist3724]

Get the flash my 2013 fz1 is insane now brother

[@janurbina9924]

Bro, I have a problem with the speed sensor wiring conector, it is a 4 pin conector I have no idea we’re it belongs to . Can u help me?😢

[@rhetericalpha]

The speed sensor connector should be 3 wires. It plugs into the back of the motor near the shock. It gets the speed signal from the transmission

[@Felix-kp4pm]

Hey great video but I have 2 questions! 1- is vcyclenut doing a special flash since you are installing a sc? 2- with the sc, I understand I will need new HD springs for the clutch, but what if I put all 6 in? Thanks!

[@rhetericalpha]

HEY Felix, so Vcyclenut is just doing the usual flash. Derestricting the stock settings, lower limits in lower gears, lower temp for fan on and those type of things. Now I ran stock springs for a long time but then really started getting into it and had a tiny bit of slippage. I wouldn't recommend doing all 6 springs as it will be one hell of a time pulling it in all the time and you could bog the motor more easily without enough throttle. Would be a pain for daily riding.

[@Felix-kp4pm]

@@rhetericalpha Alright thanks man!

[@rhetericalpha]

No problem bud. Ask questions whenever you want

[@jaronvenable4241]

Loving these vids, what's the torque spec on the rear axle nut?

[@rhetericalpha]

Appreciate the support Jaron! And the rear axle nut torque spec is 108ft. Lbs.

[@jaronvenable4241]

@@rhetericalpha great thanks, same as the mt-09 I see. I just picked up a '13 fz1 a couple weeks ago and there's not as much info for those out there as I'd thought. It has stolen my heart from my 09, I see why you've had multiples!

[@rhetericalpha]

They really are pretty great bikes. Good at a lot of things and decently quick stock. Find me on Facebook and send me a message. I will send you the PDF of the FZ1 service Manual

[@jaronvenable4241]

@@rhetericalpha yeah they really are. I had a 2nd gen fz6 a few years back and although they are "brothers", they are night and day different. Ah man I appreciate that. I don't have Facebook, do you have an email I can reach out to?

[@rhetericalpha]

I started on an FZ6 such a good starter Nd a great long distance bike. Yessir send me an email to [e-mail]

[@stevenbrown5695]

Suggested parts source.

[@TheBingo1951]

direi che l'ultimo disco guarnito debba essere spostato di una tacca !! cosa che tu non hai fatto !!!!!!