Ducati Hypermotard 939/950 SP | SC Project Exhaust Install

Leave a LIKE if you enjoyed the video!
SUBSCRIBE ► kzbin.info?sub_...
WATCH MY LAST VIDEO ▶
By your own SC-Project Exhaust
www.motovationusa.com/cfny
Equipment To Produce Amazing Quality Motovlogs:
GoPro Session ► amzn.to/2iIV8x7
GoPro Hero4 Black ► amzn.to/2iIWUON
Sena 20S Bluetooth Headset ► amzn.to/2iIZC6F
Sena GP10 Bluetooth Pack ► amzn.to/2iutLHx
Tascam DR-22WL ► amzn.to/2ilM8Bs
Microphone Windscreen ► amzn.to/2ihZQ5X
My Gear:
Helmet ► amzn.to/2j388B6
Gloves ► amzn.to/2j36w70
Boots ► amzn.to/2iTUi3S
Jacket ► amzn.to/2khRChL
Pants ► amzn.to/2kJz7Ps
INSTAGRAM - / clutchfirst_ny
FACEBOOK - / clutch1st
TWITTER - / clutch1st
#clutchfirstny #scprojectexhaust #hypermotardsp

[@ClutchFirst]

Thank you for watching! 🙂 If you're interested in any of the parts seen on my bike, click the link and support the channel. www.motovationusa.com/?ldid=clutch1st

[@ClutchFirst]

Thank you for checking out the install video. If you found this video helpful or informative, Subscribe and hit that Thumbs Up. I took a slightly different approach on this install by doing a sound comparison between stock exhaust, no exhaust and lastly the SC Project exhaust. Here is a timestamp reference if you’re just interested in watching the detailed installation. If you’d like to help the channel, I’d recommend watching straight through. 🙂 All three comparison: 0:00-1:13 No Exhaust Sound Clip: 4:12-4:48 SC Project Exhaust: 11:15-12:20

[@LifewithAnnaBee]

This video doesn’t do the real sound any justice. I was so impressed with the termis before on the monster, then Comp Werkes came with the fire pops and even gruntier sound. But for some reason SC Projects sounds perfect on both the Monster and the Hyper. 🙌🙌

[@ClutchFirst]

LifewithAnnaBee Both bike sound good but I think the Monster has a slight edge since the engine has been broken in. 🙂

[@christopherbenjamin2182]

Would love to hear an exhaust sound comparison between the Monster and the Hyper. Just as long as the neighbors don’t call the cops on you for noise disturbance LOL! But that would be dope. 😄 great vid as usual Mike.

[@LifewithAnnaBee]

Chris Benjamin I totally love that idea. We’ll definitely try to make that happen for sure! Thank you for watching Chris and supporting the channel from the start. 🤗🙌

[@christopherbenjamin2182]

LifewithAnnaBee There’s no need to thank me Annabee. Mike’s channel speaks for itself. Here’s to Mike’s continued success 🥂🍾

[@dennyking4871]

That’s DOPE! 👍👍 Curious to hear if there would be a difference. Lol do it during the 4th of July along with fireworks so you don’t have 5 0 knocking on your door lol.

[@LifewithAnnaBee]

Cheers to that! 🥂🥰

[@ClutchFirst]

Chris Benjamin That’s a great video idea 💡. I got you covered! 🙂

[@johnnymaldonado8975]

Crazy how easy you always make any installation look. Very nice job as usual fam.

[@ClutchFirst]

Johnny Maldonado I’m glad you notice how simplistic I interpret these installs. The goal is to encourage and motivate people on giving these projects a shot on their own before paying someone else. Thank you for watching and supporting the channel. 🙂

[@ralfiebenson5274]

Been waiting for this but I figured it would be a simple install. Still managed to watch all the way through the end just to hear it again. 👌 excellent video Mike. I don’t really expect any less. 👍👍 Now lets see the monster again before it gets jealous lol.

[@ClutchFirst]

Ralfie Benson Heavy Monster video coming your way soon. Ralfie, thank you for the continued support and being part of the channel. When you get a chance DM me on IG. MotovationUSA and would like to get a swag package out to you. 🙂🙏🏽

[@ralfiebenson5274]

CLUTCH1st Wow I really appreciate it dude but it’s not necessary. Please choose another deserving lad. Anything motorcycle related will just start 20 plus questions with my misunderstood wife. I live vicariously through a lot of your vids and a handful of others. It’s real dope your wife is cool with your bikes. Really appreciate it Mike. Thanks again. Ride safe.

[@MatrixDesigner85]

Congrats! 🎉 loving the new look and quality of your vids

[@ClutchFirst]

MatrixDesigner 🙏🏽 Thank you. I’m glad you’re the vids and quality. That means a lot. 🙂🙏🏽 Take a moment and Subscribe when you get a chance.

[@d.fresh.750]

Looks and sounds awesome, Mike! Making me think more about a new exhaust for my bike, lol 🤪👌🏼

[@ClutchFirst]

D. FRESH. 750 what’s the exhaust you’re rocking on your whip now? The SC Project will not disappoint, that’s for sure.

[@d.fresh.750]

@@ClutchFirst i have no idea what it is, actually. It was on it when I bought it...probably an eBay special slip-on. I looked out of curiosity, and SC Project doesn't make a specific slip-on or system for the GSX-R750 😏 I've been eyeing a Brock's system for a while, but full systems are so expensive! 😞

[@dennyking4871]

Bike sounds dope. Great install and those revs and smoke in the end tho. Great work my dude.

[@ClutchFirst]

Denny King 👑 Good looks for coming through and showing love man. Always appreciate you tuning in. 🙏🏽🙂

[@dennyking4871]

No need to thank me fam. You produce amazing work and your passion shows through each time

[@MotovationUSA]

Great video! Sounds like a beast!

[@ClutchFirst]

Motovation Accessories Thank you 🙏🏽. I’m grateful to have you guys be part of the channel. 🙂

[@ARMOTONY]

Sounds great brotha, really good information. Never thought of the spray bottle thing. Good stuff !

[@ClutchFirst]

Life With Research Good looks for coming through. Whooop, now you know a new trick to proof your install. 🙂

[@ClutchFirst]

Life With Research Good looks for coming through. Whooop, now you know a new trick to proof your install. 🙂

[@poosie1guy]

Good vid Mike thanks for putting this together

[@ClutchFirst]

Thank you. Hopefully it helps someone else down the line.

[@Viper6-MotoVlogger]

Nice choice of exhaust bro. Bike sound totally mean👍

[@ClutchFirst]

Viper6 Thank you 🙏🏽! Also thanks to good people at SC Project USA AND MotovationUSA for keeping your boy wavy. 🙂

[@Gonzosport9]

Man it sounds nice bro. Gotta our both the bikes side by side to hear it

[@ClutchFirst]

Christian Gonzalez a side by side would be dope man. Thank you for watching. Don’t forget to Subscribe if you haven’t already.

[@j.h.237]

Gonna buy one of these soon 🤘

[@ClutchFirst]

I should have the motovationusa link in the bio. Let them know you’re coming from my video and save cash. Subscribe to help the channel grow.

[@cmmoto]

That thing sounds mean ..love it

[@RPM-ty2ju]

braaaaap , congrats on the nice exhaust

[@ClutchFirst]

8300 RPM Thank you 🙏🏽. Also thank you to the good people at SCProjectUSA and Motovationusa for making things happen.

[@dariojenky9671]

I love this sound! Thanks for this video, great job! I've a 939 and i'll buy this exhaust! ..an italian hyperman ;) ..

[@ClutchFirst]

Good choice!

[@behemoth2121]

Awesome vids bro ! Very cool, I buy it and wait to receive. This vids will help me a lot ty !!

[@ClutchFirst]

Thanks man, glad you found the video helpful. Hit up the link to buy yours and use coupon code 'clutch1st' to save some money. www.motovationusa.com/?ldid=clutch1st

[@86littel]

nice vid that sound tho love it

[@ClutchFirst]

86littel 🙌🏽 Thank you!

[@arepa420]

Thank you Master 🙏 just installed mine

[@ClutchFirst]

I just added some cool mods to mine. Subscribe to see when I upload the update Walkaround.

[@arepa420]

Been subscribed 👍 definitely will check it out

[@Thatguykelz]

Sounds awesome 👏🏽

[@ClutchFirst]

ThatGuy Kelz The video doesn’t does not do the actual sound enough justice. That thing sounds ridiculous. 😱

[@ClutchFirst]

ThatGuy Kelz The video doesn’t does not do the actual sound enough justice. That thing sounds ridiculous. 😱

[@Thatguykelz]

CLUTCH1st oh that I know

[@petethegreekny5209]

Sounds sickkkk

[@ClutchFirst]

PeteTheGreek NY It sounds good but I’m sure it will sound even better once I’m done breaking in the engine.

[@christopherd7222]

Do you get a lot of decel popping? Wondering if because the cat is being eliminated is this going to cause the engine to run super lean?.

[@ethansmarr1107]

Did you do anything to the butterfly flap and are you using a servo buddy

[@AlecGar]

Wow! Awesome video & perfect sounding bike! Do you know if this exact side mounted SC Project exhaust will fit the 2020 Hypermotard SC?

[@ClutchFirst]

Glad you liked the vid. Don't forget to Subscribe! You can definitely get a SC Project setup just like that for a 2020 model. Hit the link in pin comment to shop for yours.

[@Jamaicankid]

Awesome 👍!!

[@ClutchFirst]

Jamaicankid ( Jamkiid ) Thanks man. 🙌🏽

[@poosie1guy]

You can't go wrong with SC Projects. It's what a motorcycle should sound like. #Loudpipessavelives

[@ClutchFirst]

Richard McMickens They are LOUD! Not only that but it’s a nice deep exhaust note. 😍

[@Ramon51650]

The water spray recommendation was brilliant - thanks! I'm targeting January as the month when I buy a Hypermotard 950SP. While changing out the exhaust is NOT high on my list, but because I tend to plan ahead: since I live in California the cat needs to remain; do I need to do any remapping with slip-on carbon pipes? This is the 2nd video of yours that I've watched in 24 hours - you definitely are the tutor sort - very nice presentations!

[@ClutchFirst]

Thank you and welcome to the channel. I love making detailed vids but they tend to not be very popular. I figured it’s a great way to help people understand ownership of a Ducati without fear. When you do get your Hyper, let me know. I’ll give you a discount code/link for parts. Subscribe to help the channel grow. Also, I do have plenty of ride vids on the Monster, Hyper and StreetFighter v4s through NYC.

[@Ramon51650]

@@ClutchFirst I just clicked the suscribe button. Keep doing things the way you're doing them because they're far more valuable than the "Ooooooo look at me pose and flash my $$$", or worse; use flesh props to garner attention. You have an ability that I don't have, so when you share it, it improves my knowledge base.

[@Ramon51650]

@@ClutchFirst My first objective, after kitting myself out in new protective gear, will be a steering damper. My local dealer wants hundreds of $$$ markup PLUS labor, so I need to do it myself; then radiator guards.

[@pvflyer67]

bike looks hot!

[@ClutchFirst]

pvflyer67 Thank you.

[@seppevdm]

Nice one. Question, as anti seize could I use copper paste since it kind of has the same priorities and withstands heat well?

[@ClutchFirst]

Seppe Van der Meiren You probably can but I would confirm with a certified tech before doing so. I mainly use it to make sure the exhaust slide into place easily. The anti-seize lube burn off/evaporate once the bike turns on.

[@zmk4555]

What i did was buy an akra slip on & did a fibreglass repack, sounds way better than sc imo!

[@ClutchFirst]

Sounds good man. Do you have a video clip? I would love to check it out.

[@Ethan-pl1gv]

Did you end up remapping after installing this? SC Projects' website says they recommend remapping for better performance. I just wanted to know if you did, or if it is even necessary as I plan on purchasing. Thank you!

[@ClutchFirst]

Great question. The Hypermotard sp is still brand new at 180 miles. Once I'm don't with the break-in period, I will do the official Ducati ECU up-map. It will drastically improve the performance. Subscribe and hit the notification for the update video. 🙂

[@seth_iwant_toride]

Nice!

[@ClutchFirst]

seth greathouse Thank you and I appreciate you being part of the channel. 🙂🙏🏽

[@seth_iwant_toride]

Damn mike very much appreciate you doing what you do! Nothing but love from here in upstate NY!

[@Parzival795]

Do you need to add a power unit for fuel mapping with this exhaust? I saw SC Project also has a power unit for the hyper. I see below you talk about the Ducati ECU upmap? how is this done?

[@ClutchFirst]

Marcel Dionne I did the Ducati race up-map. “On The Road To 30K Subscribers.” Help the channel grow by Sharing, Hitting that Thumbs Up and drop a Comment. Its FREE! 😀

[@Parzival795]

@@ClutchFirst where can u buy the T800?

[@christopherd7222]

What torque specs did you use for the exhaust clamp and bracket, and have you remapped the ecu? Just purchased the CR-T off Motovation.com and used your discount code! Thanks for saving me some $$$. Love the videos, keep them coming, as you are the only one showing how to install aftermarket parts on the 939!

[@ClutchFirst]

Hey Tugg, good looks for using my code. Please take moment and Subscribe to the channel and help it grow. You can go in two directions. You can either get a RapidBike Evo Fuel Management System or do what I’m doing which is getting the official Ducati race upmap. I’d would also recommend installing a Sprint Tilter as well. “On The Road To 30K Subscribers.” Help the channel grow by Sharing, Hitting that Thumbs Up and drop a Comment. Its FREE! 😀

[@ClutchFirst]

I missed one answer. I don’t recall the torque spec but I do have it written down in the garage. I’ll check and let you know.

[@christopherd7222]

Oh yeah! I subscribed the moment I bought my 939 about a month ago. Thanks for the quick response! Yea I was first looking at going with the official Ducati UpMap but they don’t sell it individually, you have to get it with the Termi race exhaust which is $2700 before taxes 😱. It could be different for me though being that I live in Cali and the emissions laws are crazy strict, but that’s what they told me at the Ducati dealership. If you know of a way I could get my hands on a Ducati race UpMap let me know. From what I understand you just quickly plug it in to the ecu download the race map and unplug it. My second option was def gunna be the RapidBike. I just gotta save up some more $$$ because I would have to have a professional install it. I looked at the instructions and the install is way outta my league especially since you have to remove the gas tank.

[@maurisurfer81]

Don't you need to remap using this exhaust?

[@jamz9104]

Badass sound .. can you send me any link from where i can get this sc project muffler ? .. Thanks

[@ClutchFirst]

Thanks man, glad you enjoyed the vid. Hit up www.motovationusa.com/?ldid=clutch1st and use DISCOUNT code ‘clutch1st’ to save some money on your SC Project exhaust.

[@lenardgor]

personly i like the termigioni exhaust best it looks motard style. sry for bad english XD

[@ClutchFirst]

lenard ggor I’m a big fan of Termis and I have a set for the Monster. After using both exhaust I can tell you that you will notice a significant difference in weight and performance gain with the SC Project. Tone wise, both are equally good. The Termis tend to have a bit of a warmer feel and the SC Project is a deep screamer.

[@brendens-lawrence2894]

Dose the sc projects cr-t exhaust fit with the sw tech saddel bags?

[@ClutchFirst]

brenden s-lawrence Sorry man, I’m not familiar with that bag since I don’t ride with any. Thank you for watching. Hit that Subscribe Button to help the channel grow.

[@ClutchFirst]

brenden s-lawrence Sorry man, I’m not familiar with that bag since I don’t ride with any. Thank you for watching. Hit that Subscribe Button to help the channel grow.

[@brendens-lawrence2894]

Thanks for the reply

[@69yourmamma]

Do you have rapid bike evo Or a power commander fuel control unit or you just run the bike lean after a slip on install?

[@ClutchFirst]

Mike Orange Great question. I usually run a RapidBike Fuel Management System with my exhaust but I’ve yet to install one on the Hypermotard. I do have one installed on my Monster and absolutely love it! 🙌🏽

[@69yourmamma]

CLUTCH1st nice 👍🏼I’m running the rapid bike evo on my 821 love the channel broski and love the bikes 🏍 keep it on two wheels 👍🏼👍🏼🏍🏍

[@rolldog82]

I like the qd box exhaust if I removed the baffles will it loud like this SC project exhaust. I love loud like this but I want the box look kool

[@ClutchFirst]

It would definitely be loud but it wouldn’t have the same tone as the SC Project exhaust.

[@rolldog82]

Clutch First NY What like of tone it will be?

[@rolldog82]

Can i ask this is the same loud as s1 exhaust?.just the s1 you can make it quite if it get annoyed after awhile right?

[@martinhub3737]

Can this thing affect bike computer? Performance? What about if i don’t use it for Race Only ? In the city. Thanks

[@ClutchFirst]

Martin Hub A slip-on Exhaust should not give you anY ECU issues. You can always add a Fuel Management System or get the ECU Flash. Also, it’s a race exhaust but you can still use it anytime. You’ll get a performance boost and your bike will be a lot louder. Thank you for watching and don’t forget to Subscribe.

[@martinhub3737]

CLUTCH1st and if I don’t do flash or any other adjustments like you recommend ? Will that be ok ?

[@usoohot]

Bike sounds amazing bro!!!! Dope as fuck!!!!

[@ClutchFirst]

usoohot 🙌🏽 Good looks man. I still have a long way to get it to where I want it to be. 🙂 Thank you for watching and don’t forget to Subscribe.

[@mikesanto69]

Looks like a boot burner. Awkward position of that slip on, no? Or is it just a bad camera angle?

[@ClutchFirst]

LSX KING Thankntou for watching. That’s how SC Project designed the exhaust. I haven’t had any issues so far.

[@naminakata182]

which 1 is louder, no exhaust or with sc project?

[@ClutchFirst]

I’m not a big fan of straight pipes. Sc Project for me all day. Thanks for watching. Hit that Subscribe Button to help the channel grow.

[@megkindy3549]

4:20 I loved that sound but it so lound

[@ClutchFirst]

Thanks for watching. You’re a straight pipe kind of guy. 🙂

[@polopauletta9984]

no decat ?

[@ClutchFirst]

No catalytic converter on my Hyper.

[@willmatic84]

I love the bike bro sounds beautiful 😄 I love bike porn .... staypozzie my friend 😙🤜🤛

[@ClutchFirst]

willmatic 84 Good looks for coming through and checking out the vid man. Hopefully you get to hear it next time we meet up. Sounds beastly!

[@naminakata182]

bro what tail tidy is that

[@ClutchFirst]

It's a modded Competition Werkes Tidy Tail kit. The How To install video should be coming out soon and I explain exactly how I did the Rizoma Turn signal mod. Subscribe and hit the notification bell to be informed once I upload. 🙂

[@cookie_licker1284]

does the exhaust even do much in terms of dampening the sound because it looks like it is just a big hollow pipe haha

[@ClutchFirst]

cookie_licker The shape itself I think it’s mainly for that deep throaty sound. There’s no dampening, it’s a race exhaust so no DB killer. Look it up, SC Project is a well known Italian worldwide Moto GP championships winning exhaust company. It’s great on weight savings, loud and you’ll get a performance boost. Thank you for watching and don’t forget to Subscribe. 🙂

[@cookie_licker1284]

@@ClutchFirst im thinking about buying a monster 796 and putting on either a sc project or a akrapovic slip on. I just dont want my bike to be too loud because 1. that would annoy on long trips (I already get that with my wr125 with pretty loud exhaust) 2. my neighbours will complain because they always complain about everything and 3. I live in the netherlands so they have to have a eu4 approved dampening or they will absolutely destroy you with tickets or even make it so you are not allowed to ride the bike anymore and have to get a check at some place. those checks are usually pretty expensive and you would have to mount the oem exhaust again and make sure EVERYTHING is right because otherwise they will just say it is still not legal and have to come back. (yes the netherlands kinda sucks in that way)