CNC PCB Panel with Snapmaker 2.0 Test

Semi Timelapse of CNCing PCB panel with the Snapmaker 2.0
Used a .2mm 30degree engraver bit for the routing and 1mm End mill for the holes.
at 6:10 , switched to an Endmill for drilling
Support on Patreon: / garagefactorysd
Follow on twitter: / garagefactorysd
Follow on Instagram: / garagefactorysd
Join Discord Server: / discord
Check out Store: www.garagefact...
#Snapmaker #PCB #CNC

[@jamesmiller7278]

It would have been nice to have a close-up of the results so we can see if it produces a usable board or if it’s just going through the motions and you’re left with something useless, like whether the traces are just hanging on by a thread or are actually functional.

[@GarageFactorySD]

Yes, got some close up shots -> kzbin.info/www/bejne/sJiteGpqppedjrs. It also depends how you set up the cnc like the cut depth, the size of the bit, how fast you set the work speed. the only feature that would be nice would be auto leveling

[@yomamafatoshi]

Hi Richard, your video showed up in my KZbin suggestions! Do you know the resolution of the pcb this mill can make? How many mils? Thank you!

[@GarageFactorySD]

The CNC can move in .1mm increments. I was able to cnc 10 mil traces using a .2mm 30 degree engraver bit. It does the job, I have an inspection video posted in my channel if you would like to check it out -> kzbin.info/www/bejne/sJiteGpqppedjrs

[@kasigeek1314]

Does the snapmaker 2.0 support auto leveling for cnc (pcb) ?

[@erikschnell1775]

No.