Coastal Offroad Bumper Build! 2004 Tacoma 4x4 regular cab 5 speed.

[@yukonjg7871]

Awesome video!! Thanks for posting, Looks great

[@SquareOneForge]

I appreciate that!

[@drexellouis4046]

Not only did you pick the best truck for this build but it's worth every moment you spend building that beautiful bumper for that gorgeous incapable truck

[@SquareOneForge]

Not sure if you meant “capable” or if you’re trolling … either way thanks for the comment. Here’s the definition of the word you chose. ⬇️ in·ca·pa·ble /ˌinˈkāpəb(ə)l/ adjective 1.unable to do or achieve (something). “That truck ain’t gonna make it up that hill, it’s incapable” Similar: unable to, not capable of, lacking the ability to, not equipped to, lacking the experience to 2. unable to behave rationally or manage one's affairs; incompetent

[@drexellouis4046]

"and capable"... LOL voice to text is not great on a cheap cell phone. I've had a few to come as and my stock 2000 extra cab could do things you wouldn't believe and my four-door 2001 with the locking rear differential to e locker would go anywhere I pointed it. I wish I had had the kit like you've got though because that bumper you built is badass dude

[@drexellouis4046]

I love Toyota tacomas but my forte was the 1985 4Runner. I did a 2-year build on a $100 scrap that I bought from a guy in Jacksonville and with the donation of seven other old Toyotas that were in different levels of decay I built what I called, Frankenrunner. On a couple of the forums back then they used to call me Dr frankenreunner. LOL

[@SquareOneForge]

Drexel Louis thanks so much!

[@Nickporter17]

I chuckled at incapable too. I have one of these trucks. And it certainly not the most powerful lol. But totally worth investing in for the way it makes me feel at home when I'm behind the wheel.

[@brianb.2857]

Nice job. Looks great!

[@SquareOneForge]

Thanks

[@gamerguy-ot7so]

When painting something in your garage make sure to take your truck out or paint outside so you don’t get overspray mist on ur sweet Tacoma paint : )

[@SquareOneForge]

Thanks! I don’t mind over spray on my truck. It’s my wife’s car I am concerned with. My truck looks good from far but it’s far from good. Totally has flaws, scratches, over spray, rust, its a nice truck but at the end of the day, it’s a tool. Overspray adds character in my opinion. Glad you think it’s a sweet truck. I appreciate the comment 👍😊

[@robertdivany1627]

Nice job

[@SquareOneForge]

Thank you! I appreciate it

[@flycubfly]

Nice job……... Damn, that’s an exact twin to my Tacoma. I have a 2001 silver ( lunar mist) regular cab with black wheels just like yours and we made the same bumper for it .

[@SquareOneForge]

That’s awesome! Are you on Instagram? I’m at MiniMonsterTaco on IG. I’d love to see your truck! Thanks

[@dennisdebellis6978]

Great Job. It looks awesome

[@mennyvega9707]

I need one

[@SquareOneForge]

Yes you do!

[@SquareOneForge]

Hit me up on Instagram and I’ll get you a discount code for coastal Offroad

[@javierochoa2469]

Nice, looks good.

[@SquareOneForge]

Thank you!

[@robynsar3612]

Slick!

[@wuttmodel3232]

So nice sir

[@SquareOneForge]

Thank you!

[@RockLander818]

Damn GiNa ! Good job

[@sreyphanit2704]

So nice can you tell me your bumpers size

[@SquareOneForge]

Coastal off-road high clearance bumper made from 3/16” plate steel.

[@SquareOneForge]

Thanks to everyone who has watched this video and subscribed to the channel!

[@jeremyoshea7941]

That POR 15 is amazing stuff it’s almost like a ceramic it’s one of those things you have a second coat why it’s still tacky are used to years ago good good stuff no rust

[@796andy2]

nice ! love my reg cab , don't know why they stopped makin em

[@SquareOneForge]

Thanks a bunch, I love my truck too. Great platform for someone without kids, or passengers.

[@PnwPryo]

@@SquareOneForge sounds lonely

[@SquareOneForge]

So does a KZbin channel with no videos. 😜

[@mikeboz4444]

Rockin brother🤘

[@robellis3990]

Send it !!

[@MerzougaAdventures]

good job I like the shape😍😍😍

[@SquareOneForge]

Thanks a lot, great kit! Easy to install

[@refsa01]

I wish that they made a kit to build a high clearance bumper for my f250 2018 ...

[@SquareOneForge]

Jump in their DMs they do a lot of R&D maybe they’ll hear you out and build one

[@SquareOneForge]

If you enjoy this video, Please Like and consider subscribing for more videos. Thank you.

[@GPDIY]

perfect, this one looks amazing!

[@SquareOneForge]

Thank you, it’s a great bumper kit

[@drexellouis4046]

As long as you are learning you are doing nothing wrong.

[@SquareOneForge]

Amen 🙏🏻

[@beckerlegjames]

What suspension do you have? Can you share a video and talk about the suspension?

[@SquareOneForge]

It’s a Toytec Boss 3” lift kit with Bilstein 5100s and old man Emu rear leaf packs. JBA upper control arms, factory rears

[@on1ytheb3st]

What wheel offset and tire size setup do you have? Did you always have a lift with those tires? Did they rub if you didn't? I'm curious for my own setup as I'm trying to see different options people go with, thanks.

[@SquareOneForge]

I bought the tires knowing they would rub stock. That way the lift kit was an easy sell to the wife. 😉 I’m not sure what to offset the wheels are, I went through 4 wheel parts to get them. Procomp series 69 with BFGoodrich 265/75 16 roughly 31x10.5 s

[@DustinGorman]

I want this bumper but don't know if I could do the diy by myself. I don't have all the tools

[@SquareOneForge]

Depending on where you are, locally a welder could do the welding for you.

[@nathanlam9884]

Next step is testing it out

[@SquareOneForge]

Already used it to right a tipped over piece of machinery, works great. I did end up adding two 1/4” gussets for extra rigidity from the factory bumper mount locations. I’ll post a video on that soon. Thanks!

[@elvinmorejon3006]

good job I like selling bumper parts or how hard it is to make a bumper to a 2013 Toyota tundra

[@هادیخلیلنسب]

🏁

[@هادیخلیلنسب]

🏁

[@talonhull21]

Does it come with pod lights

[@SquareOneForge]

Yes

[@bigounce00]

Does it have the 2.7l?

[@SquareOneForge]

Sure does

[@bigounce00]

@@SquareOneForge nice

[@lancecrackers495]

question !! i also have a 04 taco and i’m fixing to purchase the same bumper. did you have to cut anything on the grill for the winch to fit in or no? yours is a open top bumper , correct ?

[@SquareOneForge]

The video shows the details of what I cut on the grill. I was able to retain the Toyota emblem with some thought.

[@travistraynham5286]

Nice job. I'm fixing to build the exact bumper for my 1st gen regular cab, already have the bumper, just trying to find time to build it. Did you completely weld the inside of the bumper, or just spot weld it and completely weld the outside?

[@SquareOneForge]

I stitched the inside and did weld the entire outside. I would recommend welding the entire interior if I were to do it again. Have fun! Thanks for stopping by

[@travistraynham5286]

@@SquareOneForge Any particular reason why you weld the the inside completely?

[@downeyguang5028]

What the thicknes plate you use bro...how many mm

[@SquareOneForge]

3/16” plate, 4.762mm

[@jeremyoshea7941]

Awesome job on the bumper buddy awesome job thank you for sharing and your time but please wear that mask especially with that sink spray primer

[@SquareOneForge]

Yeah, I wish I had worn the respirator. I got pretty dizzy not even going to lie about it. I’m generally fairly cautious. Sometimes I do dumb stuff though. Thanks for supporting the channel

[@Soloutdoors]

What the price is ? Where can I get this bumper !!

[@SquareOneForge]

$592 less 5% when you use discount code squareoneforge5 at www.coastaloffroad.com

[@martindelafuente3123]

Always disconnect battery before any welding is done...protect ur computer

[@SquareOneForge]

I removed the battery entirely, thanks for looking out.

[@abcdefbcdefg8352]

are all plate bumpers ultimately held on by the two 16mm bolts for the reinforcement bracket?

[@SquareOneForge]

So there are four bolts in the factory locations and two additional bolts that capture the frame top and bottom with bumper and main plate. You can also do what is called the “end cap modification” and weld a nut into the front of the frame rail and add an additional two points of security. So far this bumper design is very solid! Thanks for asking

[@abelardoflores5740]

What is the thickness of the steel plate?

[@SquareOneForge]

3/16”

[@abelardoflores5740]

@@SquareOneForge Thanks buddy!!

[@evilgtsable]

Is the 1st gen taco and the 3rd gen runner bumpers the same

[@SquareOneForge]

They are sold as the same, the frame is a bit different between the two trucks. The kit can easily be fit to either truck.

[@JulianArcher]

Could you describe that mistake that you made a bit more? I'm going to build this same bumper and want to make sure I don't make that mistake. Thanks for the video!

[@SquareOneForge]

Yeah for sure, So when you begin the build you need to tack piece numbers 1 and 2 to the back of plate #3, I failed to tack plate number 2 which sits on top of the frame rails to plate number 3 and this caused a headache when I took the bumper off to burn it all in. It was a simple error and I was able to fix it but it took a shit load of time I really shouldn’t have had to put into the bumper. Feel free to hit me up on Instagram and I would be happy to give you more details and pointers in a DM chat. Thanks for reaching out

[@JulianArcher]

@@SquareOneForge I appreciate it man! Thanks a ton. I’ll hit you up if I have any other questions

[@majdiyunu6284]

👍🤔

[@danielcornejoromero8599]

quiero uno para mi camioneta

[@SquareOneForge]

Si tu puedes 👍👍

[@humbertotello8284]

Cuales. Son las medidas.

[@SquareOneForge]

El a erodes una place de 3/16” Mi espanol no es mejor

[@stephenbarlin2314]

Please could someone include a vice built into the bumper. This would turn a bumper from a useless ornament to something far more useful. ( long distance trans African travel veteran)

[@SquareOneForge]

Yeah that could be done for sure! The winch is pretty handy, not totally useless 👍

[@SquareOneForge]

Almost 200,000 views! Thank you all for your support!

[@ronaldhernandez9993]

# of tires please ??

[@SquareOneForge]

BFGoodrich 31 x 10.50 x 16

[@jaime5711]

Seems their prices have gone up.

[@SquareOneForge]

Still one of the most affordable bumper kits at $556.00 USD. Can’t beat the quality for that price. If you’re a welder or know someone who can weld, you have a bumper for less than $800. I can’t speak to any other vehicle parts aside from first gen Tacoma stuff however 👍

[@Dennie2356]

READ THE DIRECTIONS!

[@michaelbridgeo6991]

It’s not a tundra it’s a Tacoma

[@SquareOneForge]

Who said it was a Tundra?> 😂😂

[@MARCIOSILVA-zo5fp]

Ficou uma merda

[@SquareOneForge]

This says “it was shit” for those who don’t speak Portuguese. 🤣🤣🤣

[@SquareOneForge]

Thank you all so much for the support and the views this video has brought in! I am beside myself from all the traffic on my page! Please check me out on Instagram @squareoneforge for behind the scenes and other projects that don’t make the channel!

[@edwardgoodwin1813]

How much do you want for the otigimal bumper and lower valence with the turn lights

[@SquareOneForge]

@@edwardgoodwin1813 it’s been disposed of, I salvaged the light housings but the bumper was in rough shape.