Cobra Kit Car Episode 5: The Final Countdown

  Рет қаралды 29,336

MisAdventure Lab

MisAdventure Lab

Күн бұрын

Пікірлер: 70
@stevesims-d6c
@stevesims-d6c 2 ай бұрын
Love the Starting of the Motor sequence, everybody's face lights up and George went into an altered state of consciousness.
@dljones61
@dljones61 2 ай бұрын
What a great day, little bit of fabrication with your friends and then those parking lot crazy things for icing on the cake. Great job guys
@rhondasweeney7271
@rhondasweeney7271 2 ай бұрын
Love the video! Even Rudy was there. Play time is fun time!😂 HAPPY THANKSGIVING TO ALL OF YOU!
@kevinm5177
@kevinm5177 2 ай бұрын
Oh man I feel Bleepin’s pain on the shoe thing. Manufacturer just quit making the boots I’ve been wearing for almost 20 years. I was able to hoard about three pairs but after that, I’m ’in your shoes’ haha.
@bleepinjeep
@bleepinjeep 2 ай бұрын
Pretty sure they quit making these about 8 years ago but I was stocked up 😅
@Kevin-ti3rz
@Kevin-ti3rz 2 ай бұрын
Same here. I had to wear black shoes when I Valet parked cars in Vegas. The Nike Air Max was the best shoe for running on concrete. When they stopped making it in black my shoes got worn out so bad before I found a replacement that was not as good . A lot of guys quit working valet because of the pain of shin splints. Running 20 miles or more a night for 10 years and now my back, knee's and hips are shot . But getting a new hip next month
@bleepinjeep
@bleepinjeep 2 ай бұрын
@@Kevin-ti3rz you guys need a little foldable scooter to ride out and back on!
@psychobillyma
@psychobillyma 2 ай бұрын
I should have gotten a stock pile of those. When mine worn out I had to go on the "sole" search for a new life shoe. I've been pretty happy with the replacements I went with, Merrel Adventure Mocs. I'm on my 2nd pair of these now, so I expect they will quit making them before I'm ready for my next set. 😆
@petermartin2643
@petermartin2643 2 ай бұрын
The problem is all shoes are made off shore are are total garbage
@bendall248
@bendall248 2 ай бұрын
I’m happy every time I see a new video from you misfits.
@michaelm.1947
@michaelm.1947 2 ай бұрын
A day with Rudy stoppin' by is a good day!
@greasemonkey4god
@greasemonkey4god 2 ай бұрын
Friends in the shop is always a good day!!!
@Mattdadof4
@Mattdadof4 2 ай бұрын
I wore those same sketchers for 3 pairs worth...basically my late teens into my thirty's. My wife always asked me why, now I can show her this
@Mattdadof4
@Mattdadof4 2 ай бұрын
and my name is Matt...weird
@bleepinjeep
@bleepinjeep 2 ай бұрын
I call them the most comfortable shoes in the world 🌎 😅
@robertr4193
@robertr4193 2 ай бұрын
The cobra is going to be very impressive once you finish it. The motor sounds amazing.
@steven.h0629
@steven.h0629 2 ай бұрын
Life Happens! We all have projects stacking up.
@Kevin-ti3rz
@Kevin-ti3rz 2 ай бұрын
For Sure ! I have 6 things in need of some love. My 91 550 Jet Ski is on the list first so next summer it will be ready. Dang it I'm slow
@LivingJeepingandAdventuring
@LivingJeepingandAdventuring 2 ай бұрын
I have to agree with Matt on the shoes, my sketchers are awesome
@steven.h0629
@steven.h0629 2 ай бұрын
Mine are also discontinued. I'm constantly searching auctions for NOS
@Skiridr22
@Skiridr22 2 ай бұрын
Hope to see more of John on the build
@bradleymadosh911
@bradleymadosh911 2 ай бұрын
Rudy got me Dizzy watching him spin in circles 😂
@johnd71
@johnd71 2 ай бұрын
Another fun vid, Motor sounds great, Jon UK
@MisAdventureLab
@MisAdventureLab 2 ай бұрын
Thanks 👍
@campoutwestus
@campoutwestus 2 ай бұрын
I'm still trying to figure out "wife's sister's step father". Awesome video as always.
@Derf1313
@Derf1313 2 ай бұрын
Custom work takes time, & proper distractions! Lol!
@exiledfpv
@exiledfpv 2 ай бұрын
Looking forward to seeing the Cobra when it's finished. It sounds like a beast!!! Y'all need to get some drift trikes next!!! Hope y'all have a Happy Thanksgiving!!! 🦃🥧
@katreniaclark
@katreniaclark 2 ай бұрын
Great time overall especially with Rudy and Janelle, Also love seeing Higgins. I do have to apologize, I fast-forwarded through the part with Matt but I have issues with him.
@bleepinjeep
@bleepinjeep 2 ай бұрын
Why? Don't think we've ever met...
@katreniaclark
@katreniaclark 2 ай бұрын
@@bleepinjeep No Matt, we have never met. I have a number of your videos and I don't know if it is the way you act in front of the camera if you are that way all the time but it just disagrees with my personal sensibilities.
@bleepinjeep
@bleepinjeep 2 ай бұрын
@@katreniaclark Well, I'm glad we've never met then! I can't watch any of your videos to see if your personal sensibilities would agree or disagree with my own... but I'm just going to go out on a limb and assume that there would be a lot of disagreement.
@katreniaclark
@katreniaclark 2 ай бұрын
@@bleepinjeep well I only have 1 video anyway. Maybe you are different in person. I don't know, maybe it's just me. I have no problem with disagreement as everybody is entitled to there opinion.
@Backroad_Junkie
@Backroad_Junkie 2 ай бұрын
First drive should be up Utah-12. It's a 125 mile road from US-89 (about a dozen miles south of Panguitch) to Torrey. Great road to drive. Scenic as heck, lol....
@jmjm6607
@jmjm6607 2 ай бұрын
Great job again.
@vstromrider3736
@vstromrider3736 22 күн бұрын
For the problem at 8:15, run the drill in reverse once you get to that point. It'll take longer but will get through and won't break your wrist.
@Wesley-uo3rn
@Wesley-uo3rn 2 ай бұрын
Great job awesome video
@johnpope4464
@johnpope4464 2 ай бұрын
The beard looks great
@gregroseberry2953
@gregroseberry2953 2 ай бұрын
Man, I hate it when the videos END! I miss watching you guys! Y’all take too long to come out with new videos! 😫😫😫😫
@DennisMcGrew
@DennisMcGrew 2 ай бұрын
great as always
@caltexhawk
@caltexhawk 2 ай бұрын
That's the way it goes "all the time"
@treyveston7965
@treyveston7965 2 ай бұрын
I'm with Tucker on hole saws; never had a positive experience with one when cutting metal.
@wmose3694
@wmose3694 2 ай бұрын
i pre drill the 1/4inch pilot hole and i have 1/4inch hard round bar instead of a drill bit in the saw makes life way less stressful when using the hole saw on a hand drill particularly on thin stuff
@arm_luvr1002
@arm_luvr1002 2 ай бұрын
Giddy up boys
@Wesley-uo3rn
@Wesley-uo3rn 2 ай бұрын
I'm suing 😂
@Andrei_K1G1K
@Andrei_K1G1K 2 ай бұрын
Funnest thing is welding while there's a spider in your hood... 😧
@shcaskey
@shcaskey 2 ай бұрын
That last one hurt Rudy. It didn’t look that bad …. But….
@ricks3184
@ricks3184 2 ай бұрын
Where did the Rokons come from - did I miss an episode?
@edwinschlee8374
@edwinschlee8374 2 ай бұрын
To much play time to get things done. So back to the drawing board.
@benc.8103
@benc.8103 2 ай бұрын
It takes a village 😂
@raymonderickson7975
@raymonderickson7975 2 ай бұрын
😎🇺🇸🇺🇸🇺🇸😎
@saginawdan
@saginawdan 2 ай бұрын
😎✌️😎
@gwilliams4444
@gwilliams4444 2 ай бұрын
👍🏽👍🏽
@madsskov_dk
@madsskov_dk 2 ай бұрын
Cool guest stars :)
@JonStein-mu5eb
@JonStein-mu5eb 2 ай бұрын
My feet are so wide I have to go around to different stores to find any that fits.
@jfk64kennedy95
@jfk64kennedy95 2 ай бұрын
30 YEAR experienced carpenter/builder here... ANYTHING over a 2 inch Hole saw....PUT THE accessory handle on the drill.... stop trying to be a tough guy...your wrist will thank me.
@thomasfletcher760
@thomasfletcher760 2 ай бұрын
Something's missing from the engine , a supercharger .
@Kevin-ti3rz
@Kevin-ti3rz 2 ай бұрын
Baby steps
@MaxsGarajMahal
@MaxsGarajMahal 2 ай бұрын
This isn't going to do well in your Offroad Jalopy entry. I'd suggest some front drive and rock sliders. Ok, what is Misadventure Labs entering in the Off Road Games - Jalopy Challenge?
@JT_70
@JT_70 2 ай бұрын
Who are the females in the shop at the end of the video (other than Janelle)?
@CircleBrewery
@CircleBrewery 2 ай бұрын
Needs a Whipple super charger
@rjm7168
@rjm7168 2 ай бұрын
Wife's sister's step gather means he's also your Wife's stepfather, means he's your father in law.
@kjsgarden
@kjsgarden 2 ай бұрын
I *think* I heard an “…in-law” on the end of that… maybe. So his wife’s sister’s husband’s stepfather. I think… lol
@JohnDoe-fg2oq
@JohnDoe-fg2oq 2 ай бұрын
Search the shoes om E bay and you will find them as old stock.,
@Dal-set
@Dal-set 2 ай бұрын
Ruuuuuudy!
@floorpizza8074
@floorpizza8074 2 ай бұрын
Came here to say this!
@johnpope4464
@johnpope4464 2 ай бұрын
It's taking this long do to allnthe playing
@HotRodMonza1776
@HotRodMonza1776 2 ай бұрын
Wait you cant BUILD A KIT CAR !!!!! BUWAHAHAHAHAHA That is FEN PITIFUL!!!! Is it that you cant read the instructions or that oh look a SQUIRREL ???? Did you ever build a MATTEL MODEL CAR??? HAND OVER YOUR MAN CARD NOW SON
Repo Ram 3500 Refresh: Bringing it Back to Life!
11:23
MisAdventure Lab
Рет қаралды 20 М.
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
We Bought The CRAZIEST Carts On The Internet
17:56
MisAdventure Lab
Рет қаралды 34 М.
First Look at Factory Five Mk5 Cobra - Engine Power S11, E18
21:28
POWERNATION
Рет қаралды 106 М.
Sierra Echo: The Ultimate Sand Dune Test!
13:19
MisAdventure Lab
Рет қаралды 35 М.
Lets See What We Can CNC
15:04
MisAdventure Lab
Рет қаралды 30 М.
Testing Icelandic Snow Tires In America!
18:42
Dirt Lifestyle
Рет қаралды 446 М.
Build A Caterham 420R Kit Car In 30 Minutes // Time-lapsed of course!
33:23
Spray Painting My New S550 Mustang (and making it better)
44:01
TOM'S REFURB
Рет қаралды 481 М.
The Mini Rollback Strikes Back
11:47
MisAdventure Lab
Рет қаралды 108 М.