I heard that this E-diff (other call it ADB) function by default have only higher specs cars like 123d, 135i. Do you know is this E diff function can be coded in to other bmw models, like e60, e90 and other e87 bmw series models?
@GanqueGaming9 жыл бұрын
Can you make a tutorial on how to code to enable the BMW Apps under Connected Drive Menu? Thank you in advance
@lmb335is79 жыл бұрын
+GanqueGaming You can add $6NR to your VO to add Apps but without a FSC code from a dealer or vendor it won't work. Your car must have a Combox as well so a late 2011 build or later is necessary.
@dawidd3254 жыл бұрын
Hi, DIFF_LOCK -> wert_02, FLR -> wert_01 eLSD active or not active?
@RidingWithGerdas9 ай бұрын
Active
@alexhardingracing3 ай бұрын
Do you know if you can use this same software to code out the E-Diff on an R56 Mini?
@Syntax733 жыл бұрын
Any way I could contact you sir? I export the file to work folder but then ncs expert can't open it wa ts it to be an ssd file. I dont have the same list as you when selecting the job I get a list of random like 4 letter or number combos. Enter FA button brings it up.
@MrRdn098 жыл бұрын
Hi, Can you make a tutorial on how to code a new adaptive headlight module? Water fried mine and the new one from another car moves the light too much.
@Bihinchi054 жыл бұрын
what about F-series? what is the name of the CODE for F series&
@Syntax733 жыл бұрын
Can't see what module he is selecting
@1111vladan3 жыл бұрын
Is it possible to do that in e46 2004? With DSC.
@DR.BENZINA4 жыл бұрын
how can I code in ? I've a 325i e92 2007 (2.5l)
@kize325 жыл бұрын
What kind of E-diff is it that you are coding? Is it just an open diff and e-diff part that you are reffering is actually ABS/traction control that brakes inside wheel when it detects it's slipping or it's the actual BMW LSD that was installed in the M3/M5/M6 of latter dates of production which splits the torque between the wheels anywhere between 0-100%. I've seen the videos of that E-diff where it has an electric motor mounted on which moves the clutches inside and makes it work in open mode, lsd, or 'welded' diff mode
@lmb335is75 жыл бұрын
This is the open E-diff controlled by the DSC module in the non M cars. I've since programmed in a M3 ABS/DSC unit and gotten rid of all the electronic interference that the non M software has.
@darudis7 жыл бұрын
Hi can you explain how the actual diff works when "ediff" is active and not active
@lmb335is77 жыл бұрын
Quick answer is that sensors measure the speed of each wheel. If they detect a different speed of rotation in the rear wheels the car will apply the rear brake to the wheel(s) that is rotating faster and transfer torque to the other wheel. Read this blog. Excellent info on the various electronic nannies BMW uses and how to defeat them. www.onelapx1.com/blog
@martinmartin91166 жыл бұрын
Why you code out E-diff?
@lmb335is76 жыл бұрын
There's a few reasons. Most common would be because you installed a mechanical LSD. I've installed a complete M3 drivetrain on my 335is with M3 shifter running M3 GTS software in my DCT. I've also fitted the M3 DSC/ABS unit into my car which doesn't have any of the electronic intervention in it's software, with a LSD it's not needed. There's a lot of other things in the DSC module that can be coded off, mostly for track purposes. Read this. www.onelapx1.com/blog/how-to-make-your-bmw-actually-fun
@martinmartin91166 жыл бұрын
Thanks, good reasons enough :) I have E92 06´ 325i N52. My previously car was FWD with EDS (Electronical Diff - torque vectoring based on braking) and I have not any problem in winter, it goes like 4x4. With this beauty coupe I got sometime stuck. I have mounted Eibach coilovers (-20mm), so I search some solution. Girlfriend´s full stock E46 316i 01´ with M43B19 engine has not any problem during winter. 30cm of snow and drive like a charm.
@lmb335is76 жыл бұрын
@@martinmartin9116 It may be possible to update the software on your DSC module and enable the Ediff. It was only added here in the US in 2008 and it was only a software upgrade. People with early non Ediff software have been able to activate it with the update.
@martinmartin91166 жыл бұрын
LMB335is Ok I’ll try it. Thanks for your time :)
@maxnix3465 жыл бұрын
@@lmb335is7 So your one lap link is down for expired domain. I am wondering for my M Factory torsen if I should code the same settings off also? When I have the whole DSC disengaged, all I get is both tires spinning with no intervention lights on the dash of my 335is DCT.
@cshammerisrael8468 жыл бұрын
Hi So you can remove DEF from coding only ? no mil will be on ?
@lmb335is78 жыл бұрын
Not sure what you're asking. Can you disable the E diff with coding? Yes, along with several other electronic nannies if you want to. Not sure what you mean by "mil".
@Carhartt2063 жыл бұрын
malfunction indicator lamp= MIL - ON OR OFF ON YOUR GUAGE CLUSTER