Using NCS Expert to code the comfort access items for my car so that i can get into my car without having to press the keyfob button.
Пікірлер: 102
@sorcatАй бұрын
one of the best explanations of how NCSExpert and Dummy work together. Thanks you!
@marckennedy65878 жыл бұрын
One of the best coding videos for beginners! Thanks!
@kabou10008 жыл бұрын
love how much effort and how much details you put in this video, it really helped me a lot as am trying to understand all this diagnostic/coding applications for the BMW thank you so much
@alexzubenkovic53865 жыл бұрын
Finally I've found a proper instruction. Thank you so much! It easy to understand and straight forward.
@wolfgangwolfgang51805 жыл бұрын
Great, comprehensive and slow enough for the first-timer to follow. Thanks!
@oohsam6 жыл бұрын
I used this video to code my E60. Excellent video, great steps, very clear and detailed. Thank you so much for taking the time to make this video
@amydarocker65315 жыл бұрын
Which year of bmw e60 do you have ? and which obd cable are you using ? any links for buying it ?
@777fEtO Жыл бұрын
Very well explained. The best video for beginners that I found on KZbin. Thank you very much.
@pitbullzz90464 жыл бұрын
Absolutely amazing video. Thanks so much
@naureh50845 жыл бұрын
Thanks for a very very clear explanation.
@ianfalls34137 жыл бұрын
Very well explained well done thank you
@BonBaisers5 жыл бұрын
So much makes sense now, thanks !
@AGN-zp8bw8 жыл бұрын
Very well explained. Thank you!
@pawelm45027 жыл бұрын
very good explanation, many thanks
@petebmi8 жыл бұрын
Nice job...good overview/example
@santiledez078 жыл бұрын
Great video. Very informative
@albrrt4302 жыл бұрын
just what i was looking for, cheers
@JohnSmith-wb6kq4 жыл бұрын
Great stuff SAFA brother, very easy to follow, keep up your vids as they are super helpful :-)
@ecologicaltime4 жыл бұрын
Glad to hear that!
@j.mpower6222 жыл бұрын
An excellent video thankyou Sir
@SarmadAlraed8 жыл бұрын
hey friend, thank you for these huge information. you are so expert, is this just coding or I should install a hardware too to make the passive entry -Access enabled? thank you for help.
@arturarchie644 жыл бұрын
Man very good video 👌👍helped a lot.
@louisng99558 жыл бұрын
very detail~ thank you
@ukaszszczepan55384 жыл бұрын
Grate job!!!
@ady23nos3 жыл бұрын
Very very good!
@charldonwo16455 жыл бұрын
thanks for a better explanation for novice...
@Inventorius7 жыл бұрын
Helpful video!
@luv_xxx27703 жыл бұрын
hi good video
@captainLoknar8 жыл бұрын
You need to set your latency at 1 in your com port for best performance and stability.
@andyamanda57772 жыл бұрын
excellent video well done
@BReal100 Жыл бұрын
Hey! do you also happen to have a video where a replacement JBE is coded? don't want to mess it up... :D
@tribemaker1648 жыл бұрын
yussus boet I so dig your accent! and a great video
@landwomble7 жыл бұрын
Great video, thanks. Was struggling to understand NCS Dummy. Couple of questions though: when you first read existing ECU data, I'd been hitting "Read ECU" on F4 instead of changing job to "codieren lesen" and then "Execute Job". Is this wrong? The other - when NCS dummy loads up the .TRC file, I click the drop down for "Module" and I don't see the same ECU modules I do in NCS Expert - e.g. there is no "CAPPL" module in there, and there are multiple CAS modules. Why is this? Really appreciate your help!
@sergiuxy217 жыл бұрын
Very nice video,why you didn't activate the passive Go too? My problem is that my passive entry don't work but my Go is working. So i will check first in the Dis for errors and in ncs expert for the coding. But I'm afraid that i have to take out each door handle to check the antenna wires,if one handle is broken then all doors won't work i think.
@JWard28 жыл бұрын
very good
@hattinghmotorwerktv38117 жыл бұрын
well done man
@KaKamaKa19958 жыл бұрын
THANK YOU MATTE!
@Sp3NgL3R_MF2 жыл бұрын
Question I didnt have on my bmw e46 bc button on left side, so i installed it but now i need to code it, where in NCSExpert i can find where to activate BC button from there and see if it works ? What modue does that bc button belong inside ncsexpert ? Thx in advance
@taucalm5 жыл бұрын
We wait you to BACK, and you WILL BE BACK. Once a terminator always a terminator.
@sergiuxy217 жыл бұрын
Crazy,i have a small Victorinox too :))
@kevinjones49424 жыл бұрын
Hi, that was a great video. Please can I ask where I can get the NCS Expert profile from? I have all the software but only the default and NCS Dummy profile.
@ecologicaltime4 жыл бұрын
please check BMW forum and search for the NCS expert. www.bimmerfest.com/forums/
@Mike_In_Idaho4 жыл бұрын
Thank you, thank you, thank you!! I've watched other videos that jump all over and leave steps out and then want you to pay for the "real video". Uh, no thanks. How am I to know that your "real" video is any better. I'd rather just share the knowledge I have and you've done exactly that!! Great job :D
@ecologicaltime4 жыл бұрын
thank you, i try to make the videos step by step
@alantus3 жыл бұрын
In the list of modules you always choose CAS.C05, but you have other CAS modules available. Why did you choose that one? How to know which one should be used?
@GeorgeAusters3 жыл бұрын
Good video. Not sure I’d activate that feature though as it makes it easier to steal
@xzavierholmes71698 жыл бұрын
does this work for BMW f01 models what is a 2009 750
@warwickdean8 жыл бұрын
hey man, I am trying to import the. trc file into dummy, it says unresolved function keyword "bremslichtschalter" make sure chassis and module are correct... however if I import nettodat.trc I can get it to read on bc1 05 but not 02 or 03? any idea? can I just edit text file manually and flash that back?
@iliabakashvili55714 жыл бұрын
good
@jozefautersky47253 жыл бұрын
great video, thanks. Do I use it for f series as well?
@jozefautersky47253 жыл бұрын
can i use this softwares for my bmw f series?
@ecologicaltime3 жыл бұрын
no this was e series
@buynow178 жыл бұрын
my comfort access not working on doors but it not working aswell as push start without inserting key- do u think it might be something else
@harshsmi8 жыл бұрын
subbed
@henryc10066 жыл бұрын
GET DOWN!! GET TO DA CHOPPAR !!!!!
@7lampsministries4717 жыл бұрын
how do you activate the fuel pump for e39 on ncexpert
@kingchrisp1984327 жыл бұрын
how did you get expertmode on you profile to select?? mine doesn't show it
@ollyhucker98143 жыл бұрын
great video mate! any idea why when i try it on dummy it doesn't give me the option to tick or untick any boxes? its bugging the hell out of me, so technically i cant code anything!
@ecologicaltime3 жыл бұрын
select the next option in the list.
@colassolorzano63534 жыл бұрын
I follo the steps. Load profile .. f1---f3--chasis my is e90 then cas then f6. But after this wont give me the option. F4. To process ecu. Only gove me option **f3=process car*** What do you think is wrong ?
@RizwanY373 жыл бұрын
Did your car not have comfort access from factory? So they have the module in the car and it just needs activating?
@ecologicaltime3 жыл бұрын
had comfort access
@SarmadAlraed8 жыл бұрын
hello friend., is the NCS dummy program comes with ncs original program or seperate? thanks
@ecologicaltime8 жыл бұрын
separate, i got the dummy off a forum
@ygtcbee235 жыл бұрын
Head to the Chopper!
@jbcrazymods21753 жыл бұрын
HOW DO YOU GET THE EDIABAS SERVER , CUZ I HAVE ALL THE SOFTWARE BUT NOT EDIABAS SERVER? CAN YOU HELP PLEASE MANY THANKS
@gazigocmen311 Жыл бұрын
Friends, I think I did a wrong reset. When I locked the vehicle with the remote and got off, it took about 5 minutes. It doesn't open with the remote. Open with the key. After that, the remote unlocking is activated. And only the frame lights of the radio are on.
@harshsmi8 жыл бұрын
Hey is it possible that u could make video about how to install NCS expert and how to setup whole system for complete newbies like me? I have looked on youtube and there are hardly any videos about it.
@ecologicaltime8 жыл бұрын
+harshsmi i should have done that when i installed mine years back. I am going to get a new tablet. When i do, ill install all this on and do a video.
@harshsmi8 жыл бұрын
+ecologicaltime Cheers mate that would be very helpful. I am actually looking for ncs expert package to download but cant find anywhere. I tried to download from ncs-expert website but that didnt work and setup keeps failing. Most of the guides have older info which doesn't help either :(
@ecologicaltime8 жыл бұрын
harshsmi i dowloaded it from a bmw forum a few years back
@nabilishes7 жыл бұрын
When you work with WinFKP to code, do you start the engine completely or just leave the engine on IGNITION ON only?
@ecologicaltime7 жыл бұрын
sorry i cant recall.
@javiergalindo1704 жыл бұрын
Can u help me i change my radio on a bmw x5 e70 and I just need to coded the GPS cuz is not working so can u please help me with that
@jampasss6 жыл бұрын
i dont have the nxs expert profile only the default profile and when i try to edit it with the password rexpet it doesn't pop up the menu where i can edit the profile
@arm90923 жыл бұрын
when i choose to lessen a file can i turn off the car and come back alter with the finished file or i always need the car on and plugged in while editing?
@ecologicaltime3 жыл бұрын
car is not fully on, its just in the auxiliary position and yes it must have the onboard computer on.
@Imbettathenyomomma6 жыл бұрын
How did you start the Ediabus Server?
@ecologicaltime6 жыл бұрын
it starts when you launch the INPA software
@kathijakhan25484 жыл бұрын
Hi please tel me sir if the cas dont need coding for settings can o just code it without doing the trace file settings with nc xpert?
@ecologicaltime4 жыл бұрын
dont understand your question. Settings? vs Coding? what settings
@kathijakhan25484 жыл бұрын
Bro im useing frm module second hand from same type bme e90 the frm settings are same dont need to modify TRC file can i just code it without modifying the TRC FILE?
@SpartanA31xx5 жыл бұрын
Great video got my car coded! Just had a quick question, as I was exiting NCSDummy he said that it recommends me to erase the FSW_PSW.MAN Folder which I click to confirm to erase that. Just want to make sure I was okay erasing that. Thanks!!
@ecologicaltime5 жыл бұрын
you can erase it. Just remember that before running SG_Codieren, always make sure the MAN file has the correct data in. Thats why the NCS asks to wipe the file clean so that you dont accidentally code another module with the wrong data
@jozefautersky47253 жыл бұрын
Hi there, Is this work on bmw f series?
@ecologicaltime3 жыл бұрын
no its e series
@sergium63177 жыл бұрын
my Inpa doesn't have the chassis in there. your too,do you know why???
@tobiasherrmann58173 жыл бұрын
😂 u r funny - if you don’t write which chassis do you use - how he can answer???
@alantus3 жыл бұрын
Why were those settings disabled in the first place?
@tobiasherrmann58173 жыл бұрын
That question should go directly to u r own BMW Dealer... There is a lot of more features which are not used...
@Discomestu5 жыл бұрын
Look look look, it's all in the way he says "here" [heeyah] and "place" [plyce]... so if I were a betting man, I'd guess hes South African. Not the goddamn terminator! PS great video, probably saved us ideots a bit of time and from bricking our ecu's. Haha
@ecologicaltime5 жыл бұрын
yes South African
@JohnnyZenith7 жыл бұрын
Please can you tell me what I do with this problem I have. My mini r55 has a stereo from another mini. BMW can't recode it. Can it be done?
@Interestedsomewhat7 жыл бұрын
I'll be back!
@georgianautoimport40217 жыл бұрын
Hello, adaptive headlights eror disable for Please Put video
@estranged854 жыл бұрын
I don't have any "check boxes" in NCS DUMMY. It just translates. I give up soon.. After i read the module I only get a notepad file and when I'm trying to save the file as "MAN" I'ts still just a notepad file and it's not saving my changes after i execute job.
@ecologicaltime4 жыл бұрын
i think you are selecting the wrong option in NCSDummy, sometimes there are different sub options. Try different ones until you get the check boxes.
@estranged854 жыл бұрын
@@ecologicaltime I tried import a "empty" MAN file, then I got the check boxes but every box was unchecked. But I think I found a way.. gonna do some testing later 👍 My biggest problem though is that the files never converts to "MAN" files. It's just "FSW_PSW" as notepad files.
@estranged854 жыл бұрын
Update: now I got it! I saved the file in "save as" and saved it as a MAN file. Then it worked.
@bobwright65882 жыл бұрын
@@estranged85 thank you tox. I'm beginning to comprehend that I don't understand coding. But. I can buy and wreck another car. Or buy a 22k Honda.
@curioussand13396 жыл бұрын
you are really not helpful in the way you navigate and select menu items. If you had used just a little more time, you would have saved me a lot of time.
@tobiasherrmann58173 жыл бұрын
🤔 you know that you can stop the Movie on KZbin with using the || ?