Cold Steel LEATHERNECK SF: Better Than KA-BAR And Ontario For The Cost?

Short Video Of The Cold Steel LEATHERNECK SF featuring A Blade Of German D2, Hollow Ground, Black Powder Coat, Griv-Ex Handle Material, Solid Steel Guard, Machined Steel Butt End Cap, Secure-Ex Sheath, And Made in Taiwan.
Amazon www.amazon.com...
Knife Center www.knifecente...
Blade HQ www.bladehq.co...
#Marinefightingknife #coldsteel #leathernecksf #fixedblade #kabar #tacticalknife #knife #edc #edcgear #marines
#tools #combat #combattraining
Contact [e-mail]

[@knifevideochannel4657]

Cold Steel LEATHERNECK SF: This tough, combat-ready fixed blade has a distinct and iconic blade style, which has been proven to be exceptionally popular with our brothers and sisters in the armed forces: The 39LSFC Leatherneck-SF (for Semper-Fi) by Cold Steel has a beautiful saber ground clip point blade. Hollow ground and honed by hand to a startling razor sharpness. The blade is made from German D2 Tool Steel and finished with a non-reflective, highly scratch resistant black powder coating. To keep the fingers from sliding forward onto their keen edge, the Leathernecks come with a superior solid steel guard. Made of thick steel with double quillons that are turned slightly forward to provide excellent protection for your hand while offering minimal interference in the use of these knives when performing utility tasks. The handles are made of deeply checkered Griv-Ex that totally encompasses the Leathernecks extra wide, full tang. They offer unsurpassed gripping power through their palm hugging oval cross section and unique finger trough. The Leatherneck handle is capped with a thick, machined steel butt cap (not cheap casting or plastic like others on the market today) so they can also deliver frightful blows with the butt or even double in an emergency as a hammer. To carry the Leatherneck safely and conveniently in all environments, it comes with a sturdy and versatile Secure-Ex sheath, complete with fully detachable and ambidextrous belt loop. Specifications Item Number: 39LSFC Name: Leatherneck-SF Weight: 11.7 oz. Blade Thickness: 5.0 mm Blade Length: 6.75" Handle: 5.0" Long Griv-Ex Overall: 11.75" Steel: German D2 Steel w/ Black Powder Coat Sheath: Secure-Ex Made in Taiwan

[@wrjames38]

More Cold Steel badass blades! 😎😎

[@knifevideochannel4657]

@@wrjames38 it's a nice knife 🗡️ for the cost. Thanks for watching

[@dbaker4669]

I have all 3 of these knives. Love em all. I prefer the leatherneck over the Ka Bar. The handle on the leatherneck would stand up better than the stacked leather on the Ka Bar in an environment that has a lot of moisture and humidity.

[@knifevideochannel4657]

I agree D Baker! Thanks for watching

[@nativewildman9335]

Coldsteel Leatherneck Sf is a beast of a knife. I have put mine through hell and back. I have had it for 15 years and it's still going strong.

[@knifevideochannel4657]

It's definitely a classic that's built well! Thanks for sharing your experience And for watching

[@jeremyspaulding7735]

Such a classic design. Cold steel put their style on it for sure. Great video 👍

[@knifevideochannel4657]

Another winner from Cold Steel Jeremy, Very impressive. Thanks for watching and have a good weekend

[@Israeli_Prince]

I miss this knife, I couldn't take it with me on an airplane as I moved to another state. So I left it with my dad who is also a blade lover. That full tang is a beast. Might grab it again.

[@knifevideochannel4657]

If you grab it again check out newer Leatherneck Bowie! Thanks for watching

[@amirkestin8413]

I have the cold steel leatherneck It was a good buy.

[@knifevideochannel4657]

Thanks for watching

[@caseysimpson1806]

I purchased the Leatherneck SF. I have my px kabar from the 1970's and a newer one that was gifted to me. The SF easier to sharpen, more comfortable, better sheath, better tang, and better guards. However, I like the SRK best. Solid, straightforward review. SF

[@knifevideochannel4657]

Thanks for sharing your experience and for watching Casey

[@bbtb785]

LOL...German steel and made in Taiwan...I am sure your U.S. Marine friend will love it.

[@knifevideochannel4657]

Funny (no pun intended) you mention where it's made ,He was recently shipped to Okinawa for protection of Taiwan from PRC! He loves the knife along with the Rex-45 Military I bought him. Still beats the quality of Ontario and Ka-Bar 8 out of 9 times! Thanks for watching BTB

[@MattTheHewer]

I have the two cold steels. That tops looks like a big dirty beast! I have both sizes of the leatherneck and on the short one, the guard came loose and you can wiggle the butt cap a bit, but it’s still operational. (Although I’ve seen videos of the whole handle falling off). Doesn’t seem to be a problem with the big one though.

[@knifevideochannel4657]

Thanks for sharing your experience and for watching

[@lionknives3]

For me it looks like many others! But that's just my opinion. Thanks for sharing as always! Have a great Thanksgiving. Greetings from us!

[@knifevideochannel4657]

It's definitely a well made knife, With decent materials, For almost half the cost of some competitors. Not my cup of tea, But very nice nonetheless. Thanks for watching and hope you and your family are well.

[@samlee458]

looks like a great survival knife 👍 happy thanksgiving! 🦃

[@knifevideochannel4657]

Really nice interpretation of the pilots/marine knife from Cold Steel. Great quality for almost half the cost of other brands. Thanks for watching Sam and Happy Thanksgiving!

[@nativewildman9335]

For someone who has owned CS Leatherneck SF for 15 years, it's a very great knife and is priced well.

[@mikeborrelli193]

Really hope GSM start using D2 as the budget steel in their cheaper folders like everyone else does now.. I so wish my Range Boss and Tuff Lite had D2 instead of 4034 and AUS8.. I believe a D2 Range Boss 2 would be one of their best sellers if they kept the price under $50.

[@knifevideochannel4657]

I can't believe that the 4034, 4116, And AUS8 is any cheaper then Chinese D2, Which is what most budget brands are using. I have no faith in GSM run Cold Steel. Thanks for watching Mike

[@mikeborrelli193]

@@knifevideochannel4657 agreed.. My Ganzo D2 folders hold a razor edge for a long ass time and strop back to sharpness with ease. Not sure why CS can't get a read on the market.. I feel like once that TRiad patent runs out there going to be left holding the bag.

[@knifevideochannel4657]

Lynn had a read on the market, Unfortunately GSM(with all their acquisitions) is about cutting cost and squeezing a bottom line for investors.

[@DDDYLN]

@@knifevideochannel4657 agreed. I'm glad I bought most of my Cold Steel knives before the GSM takeover. BTW, GSM has discontinued the Leatherneck SF and Leatherneck Tanto. They were good knives for the cost. I don't get the logic. It's also unclear if they're going to continue making the South African machetes, which were great blades for the price.

[@knifevideochannel4657]

They're ruining the brand!

[@rainbowhiker]

I'd like that Leatherneck. Excellent blade from what I've heard. Some say it's better than a K-Bar. Don't think I'd care for the Tops knife. I've got a quarter inch thick Schrade that is a poor excuse for an outdoor knife. Too thick to be useful. Very impressed with Cold Steel as well.

[@knifevideochannel4657]

It's definitely better then the Ontario and Ka-Bar I've handled. There's a new Leatherneck Bowie That's come out recently, Going to give it a try. Thanks for watching

[@johnburr7924]

I have some quarter inch Schrades, in 1095, and with the 7" blade, they are awesome for batoning wood. That's to split or to make notches for snares or pothooks. It's not cold steel reliable, and mine are several years old, but they take a razor sharp edge and I have different knives for game processing and general cooking.

[@timbo4374]

I'll probably pick one of these up too. I have the old one with a satin blade, and probably AUS8,. That's a guess because nowhere is the blade steel marked, but they used AUS8 in most everything back then. I'd like to add this newer version to my military type blade collection. Have a great holiday my friend.

[@knifevideochannel4657]

From the research I did before the video, The original models came in 4116 supposedly. I'm not sure about an AUS8 Leatherneck, But Cold Steel did use a ton of the Japanese steel on various production runs. This D2 version really feels to be a quality piece, I'm impressed by the overall cost of the package. Thanks for watching Timbo and have a great Thanksgiving

[@Firebrand1967]

@@knifevideochannel4657 You're correct, b.

[@mohammedcohen]

...I've got both it...and the Leatherneck Tanto...

[@knifevideochannel4657]

Very nice pieces for the cost. Thanks for watching

[@LegionTacticoolCutlery]

Excellent !

[@knifevideochannel4657]

Thanks for watching LTC and Have a good Thanksgiving

[@LegionTacticoolCutlery]

@@knifevideochannel4657 my good man you too! Happy thanksgiving!!!!!!!!!🦃🍽🍁. Enjoy!!!

[@andrashavas]

What about the Leatherneck Bowie? What do you think? I believe the biggest letdown is the extreme size and the fact that it does not have a false edge whatsoever on the bowie part.

[@knifevideochannel4657]

I'm interested and I've had the knife in my cart a few times over the last couple months. Since I have the Trailmaster and Drop forged Survivalist, I'm not sure this knife "fits" for me. I'd like to check it out to see how GSM quality is though. Thanks for watching Andras

[@davidbock1801]

Another good vid, KVC dude.

[@knifevideochannel4657]

Thanks for watching David and have a good weekend

[@megaronknives3032]

They might actually ship the steel to Taiwan, since the country has almost no resources for their production. I have the Ka-bar version of the Mk.2 with the leather handle, because i like the feel and smell of leather and a friend of mine has the one with the Kraton, which i sharpen for him, so i know his one is good too. Have seen bad Ka-bars though as well. Ours are like 6 years old. A lot can change with a company in that time. I guess for the money the CS is the better buy at the moment. The Ka-bars have thinner spines so they are better balanced i guess as a fighting knife, Cs are more front heavy so they would make for a better chopper. Perfect gift in my opinion. Always enjoy your Cold Steel videos.

[@knifevideochannel4657]

Thanks for the info on the KA-BARs and thoughts on different strengths for each. KA-BAR has better quality control and workmanship then Ontario for sure! Have you ever owned/handled the Case Marine knife? Cold Steel never fails to impress me with the quality offering for the money! Thanks for watching and have a great Thanksgiving Megaron

[@megaronknives3032]

@@knifevideochannel4657 I have not had a chance to check out a lot from Ontario. They are relatively expensive here in Europe and not widely available, neither are Kydex sheaths for them. The effort of getting one for what they are seems not worth it, most of the time. No also have not idea how Case´s version is, i don´t like it visually that much and again harder to get. Ka-bars and Cold Steels are easier to find and more inexpensive. I thought about starting a sub collection of the Mk.2 a while ago, since there are so many variants. Extrema Ratio makes one as well. Not to mention the many versions from WW2. Would be a cool collection to have. Happy Thanksgiving!

[@ГеоргиГецов]

Здрав удобен и функционален нож.

[@knifevideochannel4657]

Absolutely! Thanks for watching

[@dakillah6018]

oh thats a nice set

[@knifevideochannel4657]

Thanks for watching

[@dakillah6018]

@@knifevideochannel4657 God bless you son

[@blackbirdrc8348]

I wish they would release the trail master and recon scout in sk5 again. Or even d2, really wanna pick up those blades but the only versions they offer are just too much for me at the moment

[@knifevideochannel4657]

I Trailmaster and Recon Scout would be fantastic BBRC! Your right the 3V versions are priced high. Thanks for watching

[@shonuffisthemaster]

the leatherneck is the best kabar by far, and theres really one main reason, the tang. i have broken 2 kabar's batonning, they just dont have the strength with that narrow tang and abrupt blade / tang juncture. i trust the cold steel and have battoned plenty with it (granted mine is the sk-5 version with a ffg) but i think the saber hollow ground d2 should hold up fine too. i will say, i like the kabar blade grind and finish better, but the almost sharp clip point is annoying for battoning.

[@knifevideochannel4657]

I couldn't have said it better sir! Thanks for watching

[@yasa108]

Where did you buy it on and what was the cost and was it on sale because amazon says 54$

[@knifevideochannel4657]

The price fluctuates between $50 and $75 bucks on Amazon during the year. Thanks for watching

[@yasa108]

@@knifevideochannel4657 thank you SOOO much for telling me I have been trying to find the actual price because it says it is on a sale from 120 to 50 your a life saver man

[@charlesdavis3923]

Since the ka-bar fighting knife has a stick tang my guess is any of these other brands version of it with a full tang would be tougher for harder use. I have an Ontario sp6 and out of the box it came very dull but for only 42 bucks on Amazon I wasn't expecting much. It took some work to put a good edge on it but after putting a good edge on it and stripping the powder coat off the blade it's a fantastic knife. Good thing about cold steel knives (in my experience) is they're usually awesome out of the box

[@knifevideochannel4657]

As you stated, Every Cold Steel Knife I've purchased (pre GSM takeover) had an amazing factory edge. Unfortunately my experiences with Ontario have been similar to yours, Uneven grinds and dull edges. I've had better luck with Kabar/Becker. Thanks sharing the info and for watching Charles

[@LiftHeavy1]

Happy Thanksgiving. Crush mushrooms lol

[@knifevideochannel4657]

Happy Thanksgiving LH! I laughed to myself when that popped out of my mouth. Watched to many videos of European And Australian survival Knives in the past. 😆 Thanks for watching

[@keithhicks9196]

Better “THEN” ? a KaBar. Do you know what that word means?

[@knifevideochannel4657]

Yes I do and your the first to pick up on the mistake, Thank you for that!

[@danielfenmore2712]

Grammar Karens of the world unite! Form of...improper use of punctuation and poor sentence structure.

[@jdaiiotharrio9358]

good knives

[@knifevideochannel4657]

Absolutely! Thanks for watching

[@willholly1844]

I collect Marine Corps style knives. The Leatherneck is one of the better ones. Yeah, Kabar and Ontario are about the same with the difference being the coating, park vs paint/powder coating. Pretty much the same as the Camillus, though Camillus discontinued theirs after the company changed hands. TOP's is probably the best on the market with the SOG's version being the worst. Even the SOG ain't terrible, you just have to know its limitations. Schrade's was absolutely the best value w/ the hollow handle but I believe they discontinued it also. Overall the Leatherneck is probably the best value now that Schrade left us hanging. Though the new one with the longer blade I don't trust. The MK2 didn't have that blade length and that tang. 7in is the limit for a rat tail tang. This is why the SOG is inferior, a thinner tang than any with a thinner blade. Although decent not as good as competitors. I find Mtech's at the swap meet better for $20 a much better value.

[@knifevideochannel4657]

Thanks for sharing your knowledge by supplying detailed info Will. I agree about the longer Leatherneck Bowie, Though I still plan to buy one to check out. Thanks for watching and have a good weekend

[@rnkmode1876]

They Have a Leatherneck Bowie coming soon!! Well I saw a video of a CS catalog and said it was.. I hope it wasn't a fake video. Because a Leatherneck Bowie would be Awesome

[@knifevideochannel4657]

I haven't seen that yet, Appreciate for the info! Thanks for watching

[@rnkmode1876]

@@knifevideochannel4657 I remember when I made this comment lol I just ordered the newer Leatherneck Bowie! Looks sick

[@Supra_Mare_Cultro_Bloke]

or, you mean Ontario SP10?

[@rnkmode1876]

@黑七白德 nope, I have that one too. I was talking about the Cold Steel Leatherneck 10.5" blade Bowie knife. I ended up getting it, it's pretty Badass.

[@gammonsandwich1756]

It wouldn't be good for Cold Steel's reputation to present the knife as sporting German steel only to later find out they were not using the material promised. Therefore there is no reason to doubt the material is exactly what you are being told it is.

[@knifevideochannel4657]

Thanks for watching!

[@tomhickman1006]

This is a excellent tool. The handle is more durable than leather.

[@knifevideochannel4657]

Couldn't agree more Tom. Thanks for watching

[@wamps3370]

Leatherneck has a bigger tang than KBar which is inherently stronger.

[@knifevideochannel4657]

Absolutely, It's better version altogether. Thanks for watching

[@dalecarpenter8828]

is it way handle heavy ?

[@knifevideochannel4657]

I don't notice handle heavy, But that's subjective to specific user. Thanks for watching

[@Zulutime44]

A little shorter than a Marine KA-BAR at 6.75" vs 7.0"

[@knifevideochannel4657]

Thanks for watching

[@michelecasella3647]

Ciao, desidero dirti che non sono un collezionista, ( ho solo 8 coltelli, comprati e pensati , stimolato dalla lettura di un libro che spiega come e il perché, compresa la storia) . Sono un ex.milite in congedo illimitato causa salute, ho servito il mio paese ,la mia patria (8° Rgm. Genio Guastatori Paracadutisti Folgore, 2^ "Leoni" , 12 Missioni di Pace, 1988/2001) Il mio fedele compagno un Ka-Bar , visto che il coltello da campo non era previsto in dotazione ; la baionetta MK3 è solo da parata . Ho tutti è 3 i coltelli, più il Ka-Bar (Ontario) , ( SOG non magnetico, Fox FXKD Esagon, Black Fox All Point di Garcia Amadori , Fox Karambit e la linea Roxon 4 modelli multitool veramente belli da non sottovalutare) . Salutami il parente militare. Un saluto a te , spero che leggerai di me , questo messaggio . Tuo amico italiano.

[@knifevideochannel4657]

Grazie per aver condiviso la tua storia e per il tuo servizio! Sono nato in California ma mio nonno è italiano. Mia moglie ed io speriamo di viaggiare e trascorrere molto tempo lì in pochi anni. Distinti saluti

[@ulary]

Will it be good for chopping?

[@knifevideochannel4657]

I wouldn't say good as it's lightweight and on the smaller side! That being said, It's more then stout enough to take the abuse if you feel the need to chop with the Leatherneck. Thanks for watching

[@ulary]

@@knifevideochannel4657 Thank you.Subscribed.

[@levelwu]

Nice classic looking knife but I’d still take that SRK but in AUS8, better grind and more practical steel.

[@knifevideochannel4657]

I'd love a Aus8 version! Thanks for watching

[@levelwu]

@@knifevideochannel4657 If they do then this becomes an interesting offering and not just a utility/solider knife. Thanks for making the video and showcasing the Leatherneck.

[@johnmutton799]

At least the guard faces the right way. But that advertising in the handle stops me from ever buying! Shit advertising I would not get paid for!

[@knifevideochannel4657]

The early Mass drop collaborations and some other branding has bothered me from time to time, But not on this piece. Thanks for watching John

[@johnmutton799]

Keep up with the reviews!

[@ralfyellowknifedietl6159]

No testing, no knowing 😉

[@knifevideochannel4657]

Thanks for watching rykd

[@stephenlukovich9648]

Digg it. 52$ full tang D2 D2 is a German steel you probably know.

[@knifevideochannel4657]

It has a quality "feel" to it and I like the handle alot. Thanks for watching Stephen

[@SFphotopince]

yes definitely better than ka-bar. i don't know ka-bar lost their skilled workers? or getting behind the today's manufacturing process? their quality is trash. we are actually buy ka-bar for the people who PCS in or graduate from major tactical schools. that is it. Ka-bar is for display today.

[@knifevideochannel4657]

Seems like Ka Bar and Ontario forgot quality control all together the last few years, Sad to see from these American companies. Thanks for watching

[@dalecarpenter8828]

that tops knife way to heavy handle for no real reason !

[@knifevideochannel4657]

Thanks for watching Dale

[@janfrombelgium9038]

Full tang? 😂

[@knifevideochannel4657]

Thanks for watching

[@zanemurphy7537]

The cold still leatherneck is a complete piece of s*** I broke the tip off in less than a minute

[@knifevideochannel4657]

Sorry yours was a dud Zane! Thanks for watching

[@IndianOutlaw1870]

Yeah, the Ontario Marine knives are poorly made.

[@knifevideochannel4657]

Shame Ontario quality has fallen so far! I bought a few (including RTAK ) in 2018-19 , Seems the product has gotten worse since! Thanks for watching

[@DDDYLN]

@@knifevideochannel4657 I've seen some videos on poorly quality control handles on new Spec Plus knives. I got lucky that my handles seem to be well made. That said, if you get a bad one, I believe Ontario will replace it for free. The switch to 1075 steel was a positive in my opinion. And while their new MOLLE sheaths leave a lot to be desired, they're definitely better than the old Cordura sheaths.

[@DDDYLN]

@@knifevideochannel4657 I disagree that the Ontario Spec Plus knives are poorly made. Yes, they leave the sharpening up to the user, and the sheaths aren't great. They're strong 1075 carbon steel knives though, with excellent handles. For the price, I think they're pretty good. If they were to send out their Spec Plus series with razor sharp factory edges, and locking Kydex or hard polymer sheaths, they'd be twice the price. I'm okay with it. My SP10 Marine Raider Bowie is still sitting in my drawer unsharpened. I'm not looking forward to sharpening it, but it will be a good sturdy performer once I do.

[@johnburr7924]

I have a Spec Plus Model 1 that is well over 20 years old. I remember grinding the profile and final edge on my belt grinder but it was remained sharp and useful for a long time. It's mostly for opening boxes and envelopes now. I have it on the desk in my bedroom where I read and sort my mail. Still a great knife that shows scars from lots of heavy work in the woods.

[@neroma]

Too bad it is hollow grind !

[@knifevideochannel4657]

Thanks for watching Rua

[@niko_las]

The Tanto version is flat grind, and the tip is much stronger. I have it myself and is fantastic knife!