Coleman Powermate Air Compressor Rebuild

How to rebuild a 20-year old Coleman Powermate Air Compressor and source parts.
Reed Valve: Mercury 34-825141 on ebay.
Piston/Cylinder/Ring Kit: Arkansas Outdoors (arkansas-ope.com) PN 048-0074
Pressure Switch Control 90-125psi - www.ebay.com/itm/294412464691
Check Valve: IN TANK CHECK VALVE AIR COMPRESSOR 3/8" COMPRESSION INLET X 1/2" MALE NPT OUTLET, ALL BRASS CONSTRUCTION, UNLOADER PORT www.amazon.com/dp/B06XBNW6Q1?psc=1&ref=ppx_yo2ov_dt_b_product_details

[@CheaddakerT.Snodgrass]

Subscribed. Always looking for new channels where people do real things in real time.

[@courtneyjones4807]

Thanks for finding an alternative reed replacement. I replaced mine about 8 years ago but couldn't find a replacement now except for some sketchy web sites. I also went through replacing all the part you did the first time.

[@edshandymantips4862]

Glad it helped. The reed valve works great. Overall the compressor runs like new. It’s been a few weeks now it is still holding pressure. Builds up much faster too.

[@CheaddakerT.Snodgrass]

I have had this same compressor since I purchased it new sometime between 2002 and 2005. Only issue I have had is the pressure adjustment knob has a brass left-hand thread nut in it that strips out after a while. I think I replaced it about 15 years ago and now today I went to use it and the same issue happened. Some people want $49. for the knob alone but I found it for $15. Luckily I found the spring that works with it as well so I did not have to order that; people want a lot of money for that as well. It's as loud as possible but it's worked well.I'll have to remember this video if I have any other issues. I don't really know that much about compressors, I have wondered if you had an additional holding tank attacked to a compressor like this would the compressor be able to accomodate the additional volume of tank and therefore give me a longer run time between recharging?

[@stephaniekane7276]

I’m currently working on one of these,between eBay and Amazon I think I found all the parts I need

[@johnfritz3792]

My motor went bad, I can’t figure out how to remove the bearing to remove the motor. Any suggestions

[@Bobbybbops]

Does yours have a drain plug?

[@omnimesh4096]

Hey Ed my compressor comes up to full pressure and works fine. The only issue is once I use the compressor and try to turn it on it struggles to compress so much that it stalls. Could it be the check valve? Where did you find one?

[@TerenceLeaf1]

Low pressure is almost always the piston ring better to buy kit like you have probably notice won’t be so loud also

[@TT-wq3zv]

Good video.... but how does the cowl come off? Also... anyone know what check valve fits this?

[@rislerjomarron9947]

Hi, do you now where can I get the run capacitor for that compressor?

[@benaguilera294]

You have regulator and check valve part numbers. Thanks

[@rishmallall299]

Does this compressor need any oil to operate ?

[@edshandymantips4862]

@@rishmallall299 no oil

[@anejohiggs5602]

Hey where'd you purchase the cylinder and piston ring

[@edshandymantips4862]

This link: arkansas-outdoor-power-equipment.myshopify.com/collections Need to scroll way down to find part 048-0074

[@anejohiggs5602]

Need help locating parts

[@ALOSOOON]

What direction are the main plug threads?

[@TerenceLeaf1]

Less than $20 for piston and ring and cylinder ?? Sir where can I get the same deal I have exact same compressor motor on my Coleman the motor is 5 hp manufactured by San born oh forget it you just said wrong cylinder yes I also ordered wrong one was $16 they want $156 for kit I did find one for $56 online piston cylinder and ring

[@reitter]

where did you buy it for that price?