Collecting Flesh and Blood - Solving Set Binder Storage - Dynasty

[@gabes7356]

As far as master set goes I was thinking maybe 2 separate binders 1 with all the foils then maybe one with the non foils Good deed comments

[@mastersetmadness]

You've won the drawing! Send me an email at [e-mail] to claim your Good Deeds Don't go Unnoticed promo!

[@mastersetmadness]

Let me know in the next 2 days if you want the promo, otherwise I'll draw for someone else!

[@gabes7356]

@@mastersetmadness holy snap I’m coming home from a 6 day fishing trip now I’ll get that email over to you

[@cappadocius9379]

My OCD requires that I go in order number order of the cards. That is how I would organize Outsiders. I also sleeve all the cards if putting in a binder. I would then put the order the same for cards with the same number. The order would be non-foil, Foil, then Cold foil/Marvel.

[@bieranha2471]

Sorting cards in a binder for me has three factors: 1. Classes and cardtype: Since I collect playsets to play, those who can go in the same deck need to be together. For your Masterset I guess this does not apply. 2. Optics: I always try to make pages look good. For example the daggers I have sorted in 9-pocket pages. I have a double page in my binder where the daggers that point to the left are on the left page, one row per dagger for the three versions and same on the right. If necesary I leave spots blank so that this works out. 3. Rarity: This most of the time goes hand in hand with the second point, since most majestics need less spots than commons because there are less versions.

[@gorganiangranola]

So I got a very strange idea since I'm not into Master Sets Instead of 12 pocket left to right reading an 8 pocket page binder where you turn pages from bottom to top and then sorted by rarity, then collectors number and the center row (backside upper page bottom row and frontside lower page top row) will be foils and fancy versions and lowest rarity on the outward rows (so double NF Codexes in case of Marvels tho) That way you got a neat landscape view, high rarity stuff in order, and your gaze always fixed towards the prettiest cards!

[@Trentmania1998]

I like sorting by number usually especially since it's easier to do, and it matches with the classes in the set as well. So keep with the binder and do it by set #. It's not as cool as having all the chase cards in the set right at the front but at least it would look organized. You can also do like NF separate from the RF in a different binder or put all the different versions of a card side by side, NF/RF/CF/Marvel.

[@playtimetcg]

I've always been a sucker for organizing by number, it doesn't tend to have those amazing looking pages but it shows that your set is truly complete

[@mastersetmadness]

FaB is the only game I've ever done anything other than by number.

[@khanrava]

As others have stated, there is no "right" way to store your master set in a binder. It is all personal preference and the intended use of the binder. Do you want it for functionality, protection, or exhibition? Those questions will always influence the answer. I would use the 12-pocket binders and set it up as follows. I think splitting up the set with sections for each class and type; Assassin, Ninja, Ranger, and Dual Class cards, finishing up with Generic. For each class section, I would include all versions of the token cards and weapons (Adult / Young, Weapons with equipment). Following that with non-token equipment and Majestics with CF and RF next to each other. Moving on the Rares and Commons in a vertical stack with their foil counterpart next to them will look nice. (This would be the R pitch on the top row of the binder, followed by the Y pitch in the middle and the B pitch on the bottom row) R NF | R RF | R NF | R RF Y NF | Y RF | Y NF | Y RF B NF | B RF | B NF | B RF

[@kiwill33]

Organise by number in a binder. Arrange foils first, then nf cards. remove all heroes and put them first. Then all equipment. Then each class. Use a larger 12 pocket binder and arrange them across both pages left to right (so that you have a row of 8 of the same card). Insert cards with back showing in between sections to separate the different classes and/or to plug any gaps.

[@royrehor9498]

Your videos have inspired me to have collection goals, not shooting for master set level, but one of each card from the set regardless of version is what I'm going for as I'm in the early stages of expanding my collection. In my Monarch binder I'm sorting by number, feels right in my heart, ya know?

[@CarpEyeys]

I would start with Ranger, then Assassin, Ninja, and then Generic cards. Tokens, equipment, reds, yellows, blues for each hero with each subsection alphabetically organized. Ranger/Assassin cards between the Ranger and Assassin cards and Assassin/Ninja cards between Assassin and Ninja cards. This gives a nice flow as well as helps put cards for each hero in the same area for deck building and ideas.

[@cult4338]

For Mastersets i like to sort them after the Numbers (or the Cardgallery fro fabtcg) for my palyersets its after number but every card has its on site (3red, 3yellow, 3 Blue) :)

[@postpwnedtv]

Best way I think is Marvels/EA> Cold Foils > Rainbow Foils > Non Foils. In that order. That way it puts all the fancy cards together and works backwards. We mostly want to see the cool and flashy cards first. I might start the next set on a new page as well to keep the clear looks.

[@mastersetmadness]

I do really like this way, it's nice to see the big hits all together.

[@aslaughterzombie]

so satisfying to watch 🥰

[@mastersetmadness]

Glad you enjoyed it!

[@forrestlist9099]

I think organizing the set with all the CF's together first, then the regulars separate leaves you with some gorgeous pages. Cheers!

[@mastersetmadness]

That does make those pages pop!

[@totobeau6870]

That was a very good video and one of the most important them after you opened many boosters. How to keep it safe and how to organise it. I personnel like to have it organise by card number et by collection set. While I have a reference number of the binder on Excel I can track my cards thanks to it ;D thanks again for your content

[@postpwnedtv]

That was a good watch! Hopefully we get some sweet looks on the rest of your case openings.

[@mastersetmadness]

Thanks! Hopefully we can fill a couple more slots in the binder!

[@thefaceoffate]

Personally, I like the idea of a playset of each card, cascading down the page (so that R/Y/B would line up in columns instead of rows) would be best for Outsiders. Acquiring 9 Marvels is ROUGH, but that page would be aesthetically amazing.

[@mastersetmadness]

That would be an amazing page, and even more when you describe them as cascading. Love it!

[@d-jtaylor7654]

Man, the marvels look so good!

[@mastersetmadness]

Yes they do, just need the rest!

[@Blasmophet]

I like sorting my cards by the "standard" printing with the RF near them, then putting all the special treatment(EA and CF) in order in their own section.

[@mastersetmadness]

Keeping the best looking stuff separate is my preferred method at the moment.

[@life_the_cmax_way191]

There are the obvious options of numerically or alphabetically. But I think I would take it one step further and also sort by rarity. Either starting or ending the binder with the common cards. Then you also have to determine if you will have a separate section for gear and items or will they be mixed in based on rarity or keep them separate?

[@workdayslacker]

I love seeing how different people’s brains think about ordering cards. There is no “right” way to organize your collection, just the one that you like the most 😊🎉

[@mastersetmadness]

What is your favorite way to organize your collection?

[@workdayslacker]

@@mastersetmadness Until I can get more binders, I'm using good ol' white cardboard boxes. You're inspiring me though! Anything foil goes in a sleeve, same with non-foil majestics. Majestic or Legendary equipment goes in a toploader.

[@tastea9722]

Imma be honest here, I don’t have a binder yet since I’m new to fab and don’t need one just yet. The need is coming soon so I would like to say a way to figure it out as well🤣

[@OrigamiRadio]

I’m currently looking for a good way to store cards myself. I think I will perfect fit sleeve only the valuable cards, and sort them like this: normal, rainbow foil, cold foil / rares, super rares, majestics, legendaries, marvels, promos. I keep the most valuable cards separate and in top loaders. I prefer the 9 card pages for the full play set pages, looks pretty sweet! I this could be a good option for your Outsiders collection as well.

[@mastersetmadness]

Would this sorting be more collecting or playing focused?

[@OrigamiRadio]

@@mastersetmadness I guess it would be leaning more toward playing focused. I think it would still look good though. Maybe just reverse the order or rarity so the best are at the front.

[@CJ_Williams]

Dope as. I do similar with full foil art (single card) sets though I leave all the L's to the end so if I do miss something I don't just have some blank spot. Doing just art sets also allows for 3 sets per 480 binder which is nice having WTR, ARC and CRU for example all in a single binder

[@BadGamers2024]

I like numerical, but also like the look of high end chase cards at the beginning to grab attention or last.

[@mastersetmadness]

A nice hybrid.

[@sakuraflame4988]

I am new to FAB so I am not sure I have a perfect solution. Lately for other tcgs I have just started filling a folder the non foil set at the front and then putting all the fouls together after. Let’s be honest, the foils like nice when they are all together. 😅

[@JefferyThompson]

My preference for Outsiders would be CF Fable > RF Fable > Marvels/EA > CF Ls > CF Ms > RF > NF. Just my preference to have all the best stuff up front

[@mastersetmadness]

I like this approach.

[@AshenWingzTCG]

I've always been a stickler for set number order. Although after looking over some different ways, maybe in Draftable sets you can do cards by Hero and then generics in the back? Not sure whether a 12 pocket or a 9 pocket would look best for that.

[@mastersetmadness]

I think by hero and then generics in the back is the set order.

[@AshenWingzTCG]

@Overload Gaming Yeah but I mean moreso the coldfoils of a class encircling the token hero on one page and then just showcasing the rest of the rainbows/non foils until the class changes.

[@Deefunx]

Sticking with my stance from last time, since I do playsets; I put 3 RF on top of a NF, so when they're removed from the binder I still have a card there, and CF get their own slots. Fabled fits in with its class typing as the only card that doesn't go in number order (sometimes I put a token like frostbite in a different order to stop spilling onto a new page as I do a new page for every new class/talent.) I finally got an everfest folder last week. I'm not going hard into outsiders, so I'm just storing my ninja cards at the back of my WTR binder, which I dont think would suit you haha.

[@mastersetmadness]

Are you putting the playset of 3 all in one slot, or spread across 3? My OUT definitely won't fit with the WTR cards :)

[@Deefunx]

@@mastersetmadness all in one slot, doesn't seem to stretch and helps with curling in my experience, only bad ones I have are the emeritus promos. You also need a quiver for your quivers. 😂

[@mastersetmadness]

I like this quiver idea.

[@JacexBeleren]

I always like sorting my binders by card number because its easy to see which cards i'm missing from the collection.

[@mastersetmadness]

Do you mix RF/NF?

[@JacexBeleren]

@@mastersetmadness yeah i try to rf the set but ill use normal as placeholder

[@ALKAHEST]

I’d order entirely by card number, plainly going left to right across the page, entirely disregarding whether pitch values line up on a single row or not, and omitting a “pretty cards” page

[@mastersetmadness]

So full on collector center order?

[@meatmountain8384]

Super glue the cards to the largest wall in your house in a completely random order. Make it an art piece

[@mastersetmadness]

It's on the list of considerations now.

[@minispiel19]

I would want to put my best cards in the front of my binder. However, my husband usually organizes his binders by number.

[@mastersetmadness]

Sounds like you need 2 binders! :)

[@michaelbuckley7746]

Would be awesome to have the set framed and hung on the wall. A master set needs to be viewed as a whole and not hidden in the depths of a binder.

[@mastersetmadness]

I like this idea, though it sounds quite expensive. ;)

[@WinterWolf94]

I’m trying to find the best way to display playsets of each card for one entire set in a binder. It might have to be 2 binders to fit.

[@mastersetmadness]

Depends on the set, but there might be some that fit in one of the big binders.

[@tavernofcards3041]

same as the Uprising order would be nice for Outsiders

[@mastersetmadness]

What do you like about the Uprising order more than Dynasty's?

[@juliasucksatstuff1752]

Personally I organize mine alphabetically per class/talent, then rarity. Probably not the prettiest or most efficient, but that's at least how I organized my bulk

[@TheLonewolf826]

I feel like the current way you are storing the cards for dynasty is perfect for outsiders

[@mastersetmadness]

I'm leaning this way.

[@TheIcePanther]

Lol I remember when you pulled the Emperor.

[@mastersetmadness]

Was a glorious moment!

[@stolzer8572]

I'd sort the binder by class first. Then, they are by rarity and put similar cards together. As for generics, I would put them by rarity and whatever looks good together.

[@WayOfHaQodesh]

Still dig ya videos brother...

[@thomasbarkoski]

Alright. I would organize outside binder by non foil, rainbow foil, cold foil if available. 000, 001, 002 etc

[@mastersetmadness]

So still numerical, but the opposite of the collector center order for each card.

[@thomasbarkoski]

@@mastersetmadness my personal collections are just highest rarity card for 000, 001, etc.

[@hunterapena]

I do a binder, biggest size and just straight through in numerical order

[@mastersetmadness]

NF and RF all mixed together?

[@hunterapena]

@@mastersetmadness yup. I do Alt art, CF, RF, Normal in that order

[@JCHJediGames13]

In number order but starting with the fabled or 00s first.

[@mastersetmadness]

NF, RF, CF separate, or all mixed together like the collector center?

[@JCHJediGames13]

@@mastersetmadness in decreasing foil rarity. Cf, rf, then nf in my opinion

[@d4rk0s]

Answer: By number of course :) is there any other way ?

[@mastersetmadness]

There are so many ways...😏

[@WayOfHaQodesh]

Why, why, why did they make it so hard to get all these cards. I actually love that it's meant to make it easier for players to get their hands on lower rarity foils, rainbow legendaries. What I really don't like is them making some majestic cards like Nitro Mechanoid only come in rainbow foil at lowest rarity, making even getting a playset of those super expensive.... and for me out of range atm. Why not at least always have a non foil variant unless it's fable card or legendary?

[@mastersetmadness]

Nitro Mechanoid only in foil is weird. There will be a NF version some day probably in a reprint though.

[@WayOfHaQodesh]

@@mastersetmadness Can only hope so....

[@mastersetmadness]

They seem to like reprints, it feels like just a matter of time. There's a chance the prices drop more after Outsiders also since there will be a bunch of new decks everyone wants to play.

[@jarrettevans1353]

I like to sort them by card number and play set of three. So several binders a set lol

[@mastersetmadness]

Play sets of each version?

[@davidhopson9917]

Only solid way is by collectors number or marvel/ea, then rf, then normal set

[@mastersetmadness]

I went the collector center way for Uprising. It looks cool, but I'm not 100% sold on it.

[@Elfangor00]

Isn’t it just best to do them in numerical ascending order

[@mastersetmadness]

NF, RF, CF separate, or all mixed together like the collector center?

[@thomasbarkoski]

I love it

[@christianjelle8624]

What are those containers for your playmats? Never seen those before :O

[@mastersetmadness]

They are really nice for bringing your mats to events. This is a referral link to the ones I use. amzn.to/3Eo54bl

[@christianjelle8624]

@@mastersetmadness i mean those on the wall 😁

[@mastersetmadness]

Gotcha. Those are hard to find. Make sure to get some that are 24x14. Mine are 24x13.5 and just a bit too small at the top. amzn.to/3ShBryr

[@d-jtaylor7654]

And are you an LGS owner or do you just buy a ton of product?

[@mastersetmadness]

Just a simple man who loves cards.

[@d-jtaylor7654]

@@mastersetmadness I respect that! Once FaB finally arrives in my country, you will be my inspiration for my collection

[@mastersetmadness]

I hope you enjoy it as much as me! What country do you live in?

[@d-jtaylor7654]

@@mastersetmadness I live in South Africa. LSS has said they want to get their distribution perfect before they expand here (yes, I did email them). I somehow managed to find some WtR packs, but that's it. So for now I'm stuck with watching YT, Talishar, and contemplating importing (probably singles because boxes are just not worth the import costs)

[@mastersetmadness]

Importing can be rough. Hopefully they can get things settled in the near future so you can enjoy the game in person!

[@BeerNPeanuts]

Alphabetical for me. My 1st few pages of binder include hero and weapons.

[@mastersetmadness]

It does bug me a bit that the cards aren't alphabetical within each class. Feels cleaner than rarity and card type.

[@sekki1100]

I think most beautifull would be first fable then marvels,coldfoils,rainbow and then normal, but thats just me 🤷🏽‍♂️🤷🏽‍♂️😂

[@mastersetmadness]

Big hits first is always nice!

[@johnathanoliveira4187]

Numerically, the only way it should be lol

[@mastersetmadness]

NF, RF, CF separate, or all mixed together like the collector center?

[@johnathanoliveira4187]

@@mastersetmadness In increasing order of rarity, so NF, RF, CF

[@johnathanoliveira4187]

Card 1: NF, RF...Card 2: NF, RF, CF... etc...etc...