COM32. TCP/IP - Use LCom library for TCP/IP by using Siemens S7-1200 S7-1500 PLC and TIA Portal

[@WalidWalid-kl5jx]

Thanks sir i learned a lot of things from you ❤

[@electricalautomation]

It's my pleasure

[@cameronstone4331]

Great video, Very useful. Thanks.

[@electricalautomation]

Glad you enjoyed it!

[@Markdias1]

Thank you a lot for this video.

[@electricalautomation]

Thanks and Welcome!

[@FlorianSeitz-zq6en]

Vielen Dank, mein Guter 🤗

[@electricalautomation]

Thanks! Welcome!

[@cll3634]

very good learning video

[@electricalautomation]

Thank you 🤗

[@manuelgoncalvez5036]

A logical and clear explanation.... Thanks so much 🙂

[@electricalautomation]

Thanks very much!

[@Rivuzza]

Great!!!💪💪 could you make a tutorial also for telegram notifications using the LHTTP library?

[@rohitroy7951]

Simulation can possible with 1214>4. Firmware and to solve the Error 7003 and 8600

[@rohitroy7951]

While Doing This LCom Library Under config. _ instTcon 80c5 and 7003 error

[@nikodiaz20]

Thanks you for this video, I have a problem when I can start the socket "cannot assign the requested address jvm_bind", I tried with many ports but could not solve it.

[@electricalautomation]

Maybe use another laptop. It looks like your OS is rejecting the socket software. Also turn off the firewall.

[@maki155]

if I have to send a string command to a device: e.g. FTUNE[CR] ..... Is there a way by modifying something or adding?😃😃

[@electricalautomation]

I believe this link will be helpful. A String has a header with two bytes, then the following are Char data after the header. support.industry.siemens.com/cs/document/42002283/how-do-you-compensate-for-the-string-mismatch-caused-by-the-rcv_ptp-and-send_ptp-blocks-?dti=0&lc=en-US

[@bhagyodayasinghjadhav]

Great..

[@electricalautomation]

Thanks!