TIA Portal: Open User Communication using TCON - TCP / PLC-PLC Communication

[@ikkusoft]

Great tutorial, Dont worry about video length, u are delivering what can be learned in 4 hours within 20 minutes. Very happy to spent time with u.

[@АнварАппазов-я1г]

Thank you for your work! It's very accessibly, big respect to you! Please, don't stop - you make best TIA PORTAL lessons.

[@pasty734]

THANK YOU! THE BEST VIDEO I HAVE EVER SEEN ON TCON COMMUNICATION! I was servicing a machine abroad and that protocol was driving me nuts!

[@simxschl]

Сould watch your videos all day. Amazing stuff that you did there. In our company we now are slowly switching from SIMATIC to TIA and I am very grateful for your videos.

[@mustafaantardar2553]

Very useful videos, I have never seenTia portal being explained in this amazing way in the whole KZbin, you are great teacher and expert, thanks a lot

[@banci1100]

Wow, an amazing explanation! you bring "why" to this vid. even next video take a longer time, I'll still love to watch that.

[@KnirpsManolo90]

wirklich bester mann und sehr hilfreiche randbemerkungen. bin sehr froh dass es deine videos gibt. weiter so

[@hegamurl7434]

Danke dir. Immer gut zu sehen das es hilft

[@genantamtam9364]

A summary video on ALL TIA communications types would be great. TSEND, PUTGET, IO COM, OPC-UA, MODBUS etc. Just an overview and explanation where they are used and advantages/disadvantages. And from there you can refer to your other videos which explain in a more detalied on each type of communication.

[@armchairfreedomfighter]

Thank you for this and previous uploads!!!

[@Nochdarus]

Not just like it, love it. Also great analogy on ports.

[@uzairhussain4232]

that was gooood and superb. Having Zero knowledge o fcummunication prgramming. this surely set me in the right path. Thank you and i'm too late to say this but even if it was alonger video ,would still have loved it

[@ziborgbe]

Thank you for your presentation. It was very informative. Yes the TCP protocol is very versatile and stable in the same time , that shouldn't be any surprise as this protocol is the standard base of an Internet communication for more then 20 years. Very wise from Siemens part to incorporate this protocol in S7 PLCs . I am very surprise that it is so straightforward to set TCP stack in then. I can say to be very inpatient to see some data exchange in action.

[@wh2949]

Philipp, thanks very much for these nice series of tutorial video.

[@tianvr2229]

Bravo Mate. I spent a month going through this. Your 20 min video made my month look bad.

[@mikeman3128]

Nice presentation! Very good for learning and understanding the details!

[@dariocruz4180]

Thank you for the information, the way you explain is amazing!

[@michaelotto5554]

Hello Hegamurl. Have you a video for Tcon, Tsend between S7-300 (Simatic Manager) and S7-1516 PLC's ? Br. Michael

[@TheNewAccount2008]

Interesting overview. Do you have any video around going into detail on what the data packets are actually looking like on the communication line?

[@tommyhuffman7499]

Excellent video! Thanks for making it!

[@simonmax3901]

Great work there.....I loved it

[@MtekEngineer]

You have helped me so much THANK YOU!

[@josephdossantos8406]

Do you always need to "connect" first the partner or you are doing it that way for us to see how it gets busy and then stablishes the communication? Thanks!

[@ruslanziganshin1299]

Danke für den Unterricht

[@hegamurl7434]

Bitteschön!

[@rebinshw]

Please make a video about ModBus communication (Siemens plc to another type of PLC)

[@matthiasronge757]

Great video. One very important question. Is it then possible to communicate with a siemens PLC like S7/1500 with a ethernet/IP motion control driver?

[@framos9991]

Fantastic Job. Thank you!

[@shahriarsadatieh9154]

A summary video on ALL TIA communications types would be great, Specially MODBUS.

[@carlosvilleda8397]

Will you make video for communication for TCP, the PLC-HMI, please ❤

[@karoliczanwojtylanu]

You have mentioned about VB tutorial? Can you please recommend one suitable for Siemens tasks?

[@현기환-k5s]

Thank you! Please also upload how to communicate with UDP!!

[@mehmettevfikcete3397]

Thank u and thank u again... u re awesome.

[@surajitbarman8179]

Excellent presentation. Could you share the possible ip address setup required for PC to connect PLCs in communication hub.

[@Coyote973]

Nice video with explanation. What I don't get it, is the ID parameter - why do we have to copy it, if it's already defined in the PLC_1_Connection_DB?

[@elizamartinez7319]

great video! thankyou for your presentation. we could use that on our current project. by the way may i ask when it is best to use tcon than tsend/treceive and vice versa?

[@whiskywhisky3718]

Nice video but setting that connected bit (M0.1) is not usefull i think since you only can check it one time and after that you will never see if the connection is ok. So you should be using T_DIAG instead to check connection.

[@sparklee6994]

would you please talk about how to use FB63, FB64, FB65, FB66 for TCP/IP communication between PC and PLC?

[@muktarrashid]

QUESTION: First, I want to thank you for all the time you put into this videos, I've gained so much knowledge from watching your videos. The question: I have two s7-1500 PLCs that are wirelessly connected using Siemens scalance 700 WLAN access points or WAP. One of the PLCs is mounted on a vehicle that roams from one WAP to another. The other PLC (main PLC) is connected to a vehicle management system PC, it allows this PC to send/receive data to the vehicles. I am try to see/monitor how long it takes for data to travel from and back to the main PLC? Any suggestion on I do this?

[@Automation_Click_BD]

Hi sir, it's amazing so far ! However is it possible to choose First PLC S7-1200 and 2nd PLC any other brands PLC Like delta DVP12SE11T, if yes What should we do..

[@daineatkins2512]

Thank you very much for your videos. They have really hellped me a lot with my first big Siemens program. I have tried to set up a TCON to communicate with a PC which opens up the comm link but I am struggling to set up the TUSEND to push data out. Any advise for me on this matter?

[@marciocalhau3946]

HI Hegamurl, do you have any video with profibus communication between S7-1500 and s7-300? Thank you.

[@anupkulkarni978]

Hello sir, You have any video about communication between PLC and HMI programmed under different projects?

[@PlayWithZookkoo]

Hi I've Got a question do you have in plans to do a video about configuration of modbus rtu or modbus tcp in siemens plc. I know there is a lot of videos on yt but they arent well explained. Greetings

[@danielperezcastano777]

Hi, I have a question. If I want to use TCON BLOCK to more connections, where do you suggest to use it? I have face some problems adding another one in the same program. What I must to consider to solve it?

[@Jeevan_Prabhu]

Sir, Please guide use on how to communicate a TCP/IP distance sensor with Siemens 840Dsl which is with profinet.

[@arvinddarekar7058]

Great Videos. Thanks .

[@thenareshpaul]

Please make video on MODBUS TCP/IP communication to Allen Bradley plc.

[@subhamthakur607]

How could I do the connection with my pc....

[@gaurangpatel2076]

Could you please explain how to make connections between S300 to SICK LMS-10100 sensor

[@adnanjayousi9140]

Hey, thanks alot for the videos. i have a question what is the diffrence between TCON and MB_CLIENT ? can i use TCON insted of MB CLIENT to read a slave data ?

[@vnmsilva]

Hello! I'm trying to communicate between S7-400 with CP413 ethernet card and S7-300 with ethernet connection on the CPU, these PLCs are in different projects. I am trying to use TCON, on the S7-300 a connection is opened but with an error, on the s7-400 no connection is opened. could there be any other configuration to modify that is not exemplified in your videos?

[@slavaleb378]

Thanks a looooot!!!!!!!

[@nassimahras7414]

Hello Mister, fisrt i want to thank you a lot for your videos and your explications. you help me to resole a lot of problems. I have a question please : I want to do a communication between a plc and My industrial Camera (Cognex), how can i do the connection. when i called cognex they told me that protocol TCP is accessible only on "write". if you can explain me. thank yo in advance

[@alphalos526]

Hi, ich hab gesehen das du Deutsch versteht anhand deines Paint Programms daher frag ich auch in Deutsch. Erstmal danke für die sehr gute Erklärung, dennoch habe ich eine Frage: wie ist es wenn ich das nicht Manuel steuern möchte mit der Kommunikation? Es muss doch gegeben sein dass die Passive SPS zuerst eine anfrage für die Kommunikation stellt und dann die Aktive. Wie mach ich das ohne aktiv einen Befehl dafür zu geben? Ich muss eine Kommunikation zwischen zwei SPSen aufbauen die in Unterschiedliche Projekte liegen. Gewünscht ist das Beide Programme direkt autonom laufen ohne da vorher etwas einzustellen oder so. MFG Alphalos

[@florinputilean2141]

Hi! I have a little problem, I cant open the port from the passive device. wwhen Iput the REQ in TRUE, the port its still 7000, why?

[@alexyousefian4359]

great video!

[@alp7205]

Hi, How to connect with TCON to webserver? Or at least how to create TCON not with IP but with TCON_QDN_SEC connection DB?

[@parthaproteemroy9742]

If I want to connect beijer hmi to s71200 do I have to make TCON and TSEND block?

[@razasahu]

I can't find TCON in my TIA Portal v16, what could be the possible reason? Do I have to import some library?

[@rushikeshpioneerautomation]

NEED SAME IN Simatic manager Open User Communication using TCON - TCP / PLC-PLC Communication

[@maurosergio3092]

Do you have one example for read data in tehernet ip( rockwell protocol)? I need very much your help. Comgratulations for your videos

[@mostafaalrakhawy2738]

Top, echt super gemacht . kannst Du ein Video für Scalannce-Konfiguration drehen?

[@metehanyildiz2047]

can u help me about 4 plc connection and they have multi connection each other

[@koussaideep2727]

Hello Could I ask a question about the communication between matlab and tiaportal, please? I really need

[@machineryoverhaulretrofitm6607]

Thank so much

[@muhammadkhalid8374]

Great for learning

[@rohitroy7951]

Please Make A Video On Lcom library

[@maheswaran9727]

please know me how to calculate servo motor numerator and dinaminator value

[@MrMuz12345]

fantastic Video as always, you have helped me so much, I need to communicate with a Partner PLC - Password Protected CPU and Blocks, I have addresses which the Equipment Manufacturer has shared with me but that is all, I do not know How the coms has been setup but profinet is being used. what Are my chances of communicating with the partner PLC, I am Using ET200s CPU the Partner is a 1214. what information should I be asking for from the manufacturer? your help would be appreciated, thanks

[@vishalbadalwar3486]

Helllo Is it possible using this instruction we can communicate with Allen Bradelly PL?

[@rpbhatt8646]

Hello Hegamurl Have you video schneider energy meter EM6438 communication with S7 1200 PLC with CB1241 RS485 communication

[@sahalasolusiindustri]

Great Video tutorial, Would you make video tutorial for others application like connected S7 1200 to KTP700 by profibus DP communication, Configuration communication. thank you very much, your channel is detail explain, I like it so much.

[@TrungNguyen-dl6rr]

hi bro,can you make video about modbus tcp,communicate between S7-1200 and modbus poll

[@saeed2tube]

Hi. How we can find the number of port to assion?

[@Phonkie3]

thanks sir

[@geronimodk]

Looks like you're not doing videos on this topic anymore, but someone (and your videos are usually great and really well explained) should really do a video on the LHTTP library, specifically the LHTTP_PostPut and LHTTP_Get blocks! They're not very well documented and asking Siemens support they're kind of "I can't help you, figure it out yourself" 😒

[@abdelaziztiferni9471]

Hallo wie sieht die physikalishce Vedrahtung ?

[@gajendram6462]

Super

[@anujkalamkar8813]

thank you sir

[@sudeeppandey1045]

why can't we set partner port to 50001 ..

[@delisoranamaria6466]

Hi! i try to connect a CPU S7-300 with a tightening tool, but i still have status 7000 and the communication it is never done. any idea?

[@hegamurl7434]

Hi Delisor! The Status "7000" just indicates that the block is currently running without errors. When you make a connection between two devices it will become a "0000" for a very, very short time that we can not even see... try using a "Set" statement that get's activated when the value becomes "0000" (even one cycle is enough for the set). If the memory bit connected to the set becomes "TRUE", you know that you have a connection

[@delisoranamaria6466]

i already use set, but it is never set, so the connection is never done. i use a CP343 for the connection. Could be a problem?

[@fabianm2819]

wish you were a uni lecturer

[@automationsystem5858]

NICE VIEDO , PLEASE MAKE SIEMENS ENCODER SCALLING

[@pkdata55]

Hey Hegamurl thx for a lot of videos if you need inspiration for a new video :-) how about siemens with MQTT ;-)

[@bobbychikkala180]

where the data being transferred

[@dennisrubio2375]