Combat Carry Glock 43X

[@hughmanatee7657]

I like the way Lenny handles the pistols-it’s like he’s showing fine jewelry, or rings to fiancés.

[@NYHCx845]

Reminds me of the HOME SHOPPING NETWORK

[@boscobosco7072]

It’s nice to see you in a state that actually appreciates the constitution of the United States!

[@flako3182]

Leaning towards the G43X MOS more than the G19. Perfect for concealment specially with my small body type

[@amack1996]

Been in the store a couple times now since they opened in Nashville. Very impressive to say the least.

[@SterlingWheel]

I kept my 43x stock for a few years now and always wanted to keep it that way. But recently, I have been upgrading a few things and really enjoying it. I'm not sure why there's so much hate over adjusting perfection in a Glock.

[@bthemedia]

Exactly… customization for discerning customers!

[@richieewinns]

People just hyperfocus on literacy too much when it comes to branding. It's an marketing strategy and image Glock portrays of themselves. Perfection is subjective and we all know that, but people just look for any reason to bash Glock just for the thrills.

[@ballsack8937]

Glock functions the best when you don't touch internals but if it works for you, go for it

[@US2A]

Then it's not perfection I guess

[@jessemurdock8127]

i just worry about reliability when changing things, especially if its a gun that you'd carry

[@TulioViloria]

Lenny you were born to do this. Congratulations

[@tomahawktom7595]

The Glock I carried in a combat zone… iron sights, would have been nice to have some of those gadgets back then

[@mtharri]

I like my Glock 20 just the way I purchased it. Don’t need any of that fancy stuff. It shoots perfect the way it is.

[@michaelslisher4652]

Short of the iron sights in front of the RDS, my G26.3 that I recently built from a stripped frame have virtually all of the mods you've done on your Combat Carry. Upgraded slide, night sights, upgraded barrel, GS heavy tungsten (18 lb.) guide rod / RSA, GS extended slide take down, Glock extended slide stop from the GS, GS Black Yikes connector, extended mag release, trigger upgrade, mag extension. No camo, though. Well done, Lenny!

[@danrice2723]

My EDC is a 43X as well. I am running the Shield Arms 15 round magazines and one with a +5. I did have a break in period with them but they are flawless now. I bought a G45 with a Pyramid trigger in it for reference. It was nice but I'm not sure it was a world beater. I was leaning toward the Johnny Glock Vex trigger for my 43X if I changed it at all. Even as is I have a pretty nice stock trigger. I love your Videos Lenny! Keep on keeping on!!

[@jamesstewart924]

Shield Arms has a 15 round mag that is the exact same size as the stock mags, just holds 5 more rounds without the extended plate.

[@jeremiahmoya5054]

a lot of mixed reviews on it tho

[@E52O4]

@@jeremiahmoya5054I’ve had them for over a year. Over 1K rounds to date, without a malfunction.

[@jimbutler2335]

Zero problems with the 4 I have.

[@babayagalawless7046]

Usually you will need a new mag release if you get the Shield Arms mag because the metal mag will cut at the plastic mag release

[@zachgregory1289]

I have 4 shield mags and ran fine besides one will not slide lock after last round. Had a friend he had a new shield mag and base plate cracked in half and all the rounds shot out of the bottom. Seems hit or miss. Just my experiences.

[@greggblankenshipp8202]

Man i'm glad the Glock store is in Nashville!!! Thank you Lenny!!!

[@markarmenta1919]

The woodland camo is 🔥👍🏼

[@Mntoyaz]

Lenny, love the customizing that your doing! Your videos are always very informative. I would love to put the black and grey finish on my stock G19 Gen 3.

[@markchambers2812]

Thanks Lenny

[@bbell95]

Top notch operation and facility. If you get a chance to visit definitely do it. Was just there this past Wednesday, was given a tour and saw all those cnc machines .

[@danstamper1475]

I couldn't believe you where ever in California

[@darrinfry2251]

I'll keep this in mind. Thank you sir !! You come out with different stuff . 👍

[@-1Patroit.]

I love Glock and it’s the only pistols I will buy but Johnny Glock makes a very fine trigger

[@Jakub1989YTb]

Those small holes in the slide are for lint and sand? Truly ideal into combat environment.

[@greghilt8492]

Lenny, as a one time owner of serval Glocks, I got away from them because it either didn't perform or feel right in my hand. I found your videos and I'm convinced YOU can tailor a Glock in a way that would work for me. For all the custom stuff you do, can you change the feel of the grip too?

[@Jtkc5018]

Only problem with cerakote on a carry gun is how fast it wears off when it's in and out of kydex holsters. When are you guys going to start doing DLC or Nitride? Nice looking pistols though!

[@ezekielmajor5511]

Man, I really like those. Definitely on my list to purchase in the near future.

[@bushcamo223]

great examples and I didn't realize you made full custom carry models. I know what I need to save for now!

[@JacobW.83]

Lenny, you should do Call of Duty themed slides. Like the Red Tiger Stripes

[@dasniper282]

Can't wait for mine to ship 😎

[@MyJoker1967]

I picked up my Glock 43X MOS a few weeks ago. I want to keep it the way I bought it but these upgrades are so tempting

[@Chris11249]

Naw I say just leave it. Glocks are made for one thing only, shooting BGs. There's plenty of nicer slicker cooler guns to play with on the range. My 2c at least. I do like the RMSc red dot on my G43x MOS

[@FreakinRican06]

I feel the same way, the only mod that I am really thinking about doing on my 43X MOS is the pyramid trigger because Lenny is right after 150ish rounds through my gun my trigger finger really did start to feel the blade of the trigger safety. Created quite the hotspot on my finger for a day or so. If I did make the jump to get the trigger though I am only going with the basic trigger in a black-on-black configuration as to not draw unwanted attention if I ever did have to use it against someone.

[@marinechapssemperfiout9939]

Outstanding presentation. Semper Fi

[@jamesbasaldua100]

Alright another fine video on the GLOCK weapon. Take care and be safe. See you on your next video.

[@rogan70]

Question: in your uploads, are you able to show what it looks like looking through the sights so we can see what it actually looks like?

[@erikbhill]

I’ll be in Nashville in a couple of weeks and plan on stopping into the store. I’d love a tour.

[@Acyclistandhockeysnob]

The only thing I added to my 43x is the TLR6 laser light. No need for anything else. Maybe update the iron sights.

[@ousoonthebeat6927]

Getting tritium sights, the tungsten guide rod and the mag well.

[@marksc1929]

Nice .. thx Lenny 👍🏻

[@JohnWicksPencil14]

Hopefully the slide stop issue has been fixed. Bought the extended controls for my 43x and the slide stop would not keep the slide locked.

[@vedymin1]

Could the holes on the side of the slide affect reliability ? Something could get in there ?

[@mauriciohernandez2507]

I have the pyramid slide with the optic, I want those high sights in front now

[@RA-rf4nz]

Does adding the tungsten guide rod change the cycling speed? slow down the slide cycle? Just wondering if adding more mass to the slide would change the speed of the slide going back and forth.

[@johnathangelok2470]

As far as I can tell it makes almost zero difference. Changing the spring is what really makes a difference on recoil and timing. I had 4 windows cut in each side of my Glock 40 which took a ton of weight off. I upgraded from the stock 17 lb spring to a 22 lb spring and it functions fine. I don’t think adding a tiny bit of weight in the guide rod would make one shred of a difference

[@robertp881]

I have never once felt a glock safety on my finger.

[@jeffadams9807]

PRICES On The Complete Gun & Just The Slide Itself ???

[@MikeV671]

Just wondering if the +2 - +4 mags for the combat carry edition are steal or factory issued Glock mags?

[@tacticaltray4907]

Should have used the mos 43x frame so we could mount a light

[@danalamb8398]

I'm keeping my G43x just as I received it. Not going to mess around with perfection.

[@Jake_Kern]

I made sure I got one with a Factory Installed RMSC, but I couldn't get used to the glock trigger, so I did get a drop in trigger from these guys. That, with a few extra mags and im golden 👌

[@sig3ldunc4nI]

I always toss in a grip insert but other than that I run stock.

[@cybersquire]

Just as Gaston Glock intended👍

[@goatielocgmane9094]

I just need that extra 4 rds

[@natedog380]

@@goatielocgmane9094 get a p365 or hellcat…no mods needed😀👍

[@alexholdenii4946]

I want one of these! Bad ass

[@selsp97]

The green camouglage one is nice, although I'm not a camo guy.

[@tedm4932]

Is there a GS sku # for the standard camo to buy the entire custom gun ?

[@josephfloyd5008]

You da man Lenny!!💪

[@sidneydaugherty4895]

I just got the 9 mm barrel for my 40 Glock 22. I also bought the extended slide lock. I can load 18 rounds in the mags which I like. But every shot will get a slide lock. If I keep my thumb on it, it will empty every mag. I was just wondering if I put the stock slide lock in it if it will not lock back?

[@thomassmith3948]

awesome guns for ccw

[@freddyfingers3]

I’ve kept my 43x mos stock but I feel like I need that guide rod

[@maikeru1801]

where do you find these on the website ?

[@joshv06]

I have a 43x MOS and I get a lower 1/3 cowitness with stock sights.

[@LJ-jq8og]

GLOCK STORE: Can you put a good laser on that combo ⁉

[@Ol_Red_Beard]

Will the CCA MCK work with the 43x MOS ??

[@godtiergr8ness84]

Do you customize Gen 5 G45?? I have a plain one.

[@Jeriah12]

I could find this on your website. Are they all sold out?

[@chickmagnet8301]

I kinda hat this whole concept. Putting sight in front of the optic especially at suppressor height is just eliminating view of your already small window. Suppressor height sights are only needed if you are using a suppressor. Many optics have a notch built in to use with the front sight if the battery dies. But honestly it’s just easy to buy extra batteries and replace them before they die. I think this is a solution searching in the dark for a problem.

[@brianstreet185]

How bout getting some at the Nashville store with steel night sights!

[@blindsoldier06valentino77]

How much for that slid with optuc ready? Amd how it will come here at the philippines?

[@mzwandilejanuary4222]

Can you guys customise guns for South African users as well? Do you customise for International Markets?

[@safaricartvideos]

Do those sights really hold zero and keep working mounted on a slide? It just seems way worse abuse than just gun recoil, getting slammed back and forward between each shot. I guess the cheap ones break quick.

[@tob357]

Are these 43X custom builds using the v. 5 with the single notch for sub-light?

[@lanceschouw5276]

Putting that rear sight Infront of the optic makes an already short sight picture even more shorter.i don't see why any1 would do this

[@Broski__]

The red dot is the main sight at play, and having it closer to your eyes is better. The sight radius on the irons is definitely a little shorter but let's face it, those are backups. It's personal preference really.

[@douglasphillips24]

Awesome work .

[@IndianaDundee]

Slim Glocks Vrs 365 Mavro or 365Xl. Which one is cutting edge?

[@roobscoob47]

Thanks, Uncle Lenny~

[@danieljacobson5774]

How much for one of these??

[@christiandelatour2140]

Is it me or is the rear sight mounted backwards?

[@brianbarriger8553]

Nice job as always!!!!!!

[@drichi07]

I shouldn't think the camo version looks so good, I suppose, but I do and I have no idea why I do.

[@calvins4084]

shield arms mags with it would have been perfect. you could have more Ammo and flush fit. those are awesome though!

[@Warrior-X]

That’s a very short sight radius. The longer the sight radius the easier to shoot accurately.

[@danieljacobson5774]

Do you work on canicks

[@DBO-cv2xf]

Basically like the new psa dagger 43x sights

[@user-vh2ne4il3x]

What’s the price for a glock 19 gen5, if I send it in for sights and the slide?

[@uptowndann109]

You said 507k but I thought 43x used the smaller rmsc footprint?

[@jeebugorn]

if i bring my glock to your store from out of state, and it takes you guys a few days/weeks to complete it, would you have to have to send to an FFL near me or could i come and pick it up when complete?

[@10milliBuddha.]

Y’all need to make some dam 15rd mags Glock mags . I definitely don’t want to rely on shield arms or magpull when I know y’all can do better

[@ztc1234]

Perfection. On gen 5 and counting. 😂

[@carlhargis8573]

I LOVE Them!!!!!!!!!!!

[@travistoor6360]

How do I get the +4 mag extension

[@jefflemberg645]

Put a standard magazine in there, take that red dot off, and you'll be good to go.

[@chetfriday7636]

Lenny, you guys doubled my order number and I have sent emails, waited on hold for in excess of 15 minutes twice, and have not gotten a response from the GS yet. I love your store but I need some help here... Chet Friday

[@paulharmina7480]

You removed the mag on the camo but didn’t clear it like you did on the first two.

[@billrowan1957]

I greatly appreciate the red dot, but I'm glad they weren't a thing when I learned to shoot. I personally think beginners do themselves a disservice learning on them.

[@okiecustompew]

It would be a dream job to work at the glock store! It would be so nice to love to go to work lol.

[@glockstore]

We're always hiring.

[@okiecustompew]

@@glockstore not in Oklahoma tho lol but i prolly would leave everything just to be able to do something i love so you never know!

[@reekz8089]

I’m trying to leave Hawaii because it’s so expensive here. I want to apply for a job at your store. I love guns lol

[@tomasfeliciano6635]

If Glock makes a 15 round double stack magazine for the 43x MOS, more people would buy it.

[@guerian84]

@@tomasfeliciano6635for now get the shield arms I’ve had no issue with mine also get the metal mag release

[@Andino.]

Someone going to combat ain't carrying a limited capacity with a extention gun, they are running a 19 with an extention on the mag if possible. You don't need to hide nothing in combat so, no need for a thinner gun

[@Eric-tw4qx]

@Andino. Unless your in Special Operations, you're going to be issued a Sig Sauer. 👍🇺🇸🇺🇸

[@johnrebel8925]

Spoken as a true conventional line individual. Thank you for your inside the box mindset. SS/DOL

[@American54]

I’m just going to put a Shield red dot on mine

[@outdoorsnotherthings]

Guiderod had my 43x double feeding jamming and slide not locking back

[@memedealer171]

My guy, I would stay away from the Glock store, I've bought 3 items from this place and all were complete failures,if you want actual good parts go check out Jonny Glock.

[@bilbsk.2510]

Awesome videos

[@Soravia]

When are you gonna custom P320? Especially in best millimeters?

[@adamjaeger4189]

Why doesn't Glock sell a custom gun off the shelf.

[@goatielocgmane9094]

Where they have that magazine at?

[@dalecharles811]

Very cool

[@PreparedCitizen1996]

When are you guys going to get some more glock performance triggers in stocks?

[@CM-ve1bz]

What make it better than the 19. It was supposed to be a step from the 43, but ends up being bigger than a short barrel 17. What advantage am I missing?

[@CM-ve1bz]

@@Shieldel The thin frame is a plus but as we all know it’s the grip that’s hard to conceal. When people buy a 43x or even a 43 then use a one or two round extended mag, the grip is as long or sometimes longer than a 19. The 43x even using a flush mag is the same grip length as a 19. Now I’ve cut my round count in half and still trying to conceal the same grip. I personally carry a 43 and it’s a love hate relationship. I love the conceal ability but hate the round count. Having just 6 rounds doesn’t give me a warm fuzzy feeling, so now I carry a spare mag when I didn’t before with the 15 to 17 rounds of my others.

[@e39jose]

Which weight would be recommended for the tungsten guide rod? For a 30sf?

[@AO-rd6ft]

Let's see some custom G26s

[@VinnyBully]

I love the G43x, best CC hands down.

[@zesser_yt4370]

Good day. Do you do this with the Glock 45 as well and how much will it cost

[@zesser_yt4370]

Just the upper

[@glockstore]

We are able customize any Glock model! Call our custom ship for more details! You can find their number on our website!