Common CRUZE problems and issues from Dave's World

[@davesworld2132]

For some reason the link to the membership doesn't work in the description. Here is a direct link if anyone wanted to join the membership. And I appreciate you supporting the channel in advance. kzbin.info/door/46AZdy5lJVvEE2NMsyWolAjoin

[@mohammadkarimi4105]

Hey got a 2018 cruze 1.4 auto. I was not driving the car for like a month, it was at a body shop. I got the car back and it started misfiring, i took the plugs out, coils, and the whole fuel rail out. changed the plugs and coil packs, i noticed that the hole for the injectors had a bunch of debriee and oil in them. i cleaned the injectors just with some carb cleaner but only from the outside i didn't have an injector tester to clean the inside of them. and its still misfiring. btw the plugs were dry no oil on them. If you could get back to me that would be awesome because so far i have the last option left and its injector replacement but 500$ is kind off tight for me right now. Thank you! Love your content hi from Canada.

[@davesworld2132]

Hi dirty injectors like that is normal because of how dirty the intake system is. www.supercruzes.com has an oil separator catch can system that changes the PCV routing. The reason those injectors get so dirty and the plugs is from the oil and moisture getting into the intake system

[@mohammadkarimi4105]

@@davesworld2132 got it will replace the injectors and add a catch can thank you!

[@davesworld2132]

@@mohammadkarimi4105 go to www.supercruzes.com you should check out the system that’s listed on the site because it’s not just adding the can it’s also rerouting the PCV.

[@davidcooper6618]

great video Dave. Thank you for your time. Helps alot. Always appreciate the man who takes time for his kids too!

[@davesworld2132]

I appreciate that too. One of my kids keep telling me he want's to be a KZbin star like Daddy lol I guess father son time pays off LOL

[@davidcooper6618]

@@davesworld2132 you will never regret making time for your kids.

[@jeffboyer8214]

Nice video sir, packed with some really good information. Well you opened up a few options for me as a gen 1 owner just by talking about the charge pipe from intercooler to throttle body. By saying it can make a cooler charge temp. At boost & less restrictions. I have been waiting for a forge Reciulation valve from BNR before I move farther on with more parts. Also I got a belly pan for the car to see if that helps with mpgs. as well as my 12 never had one but 35.6 pre Gallon isn't bad. Also with direct injection unfortunately you carbon build up on valves and intake runners due the no fuel dilution before the valves. I imagine a good oil can help with keeping this down but if it gets carried away periodically these areas have to be cleaned as I have seen in other channels on the tube. Have safe day with the family.

[@davesworld2132]

Hey how are you. Thank you for watching. Once I finish my meth injection design for the Gen 1 and Gen 2 it will give us cooler intake temps and more POWA! What it will also do is clean the valves and combustion chamber of carbon build up. That in it self is exciting! The belly pan from an eco model is a good idea. Also the eco model has some aero modifications over the normal version CRUZE you should look into for MPG

[@jeffboyer8214]

@@davesworld2132 thanks i have been doing ok even know we have some challenges at work but we have been doing cool things and fixing our equipment & we have made improvements & it show in our production. My 12 6 sped cruze has been doing well over all. I have to change my plug gap as mine are set at 0.032 and I get blow out on deceleration. I think I got a weak tank of fuel this week power seems down so I'll go to a different station next week. I'm at 11 psi now and found the check valve at my Turbo on the pcv pipe was clogged and cleaned it up no difference from this clean up. So yeah thank you again and you can reply latter to this question. Will your largest intercooler work on my gen 1 engine & if so does it need a tune ? I do know that pipes are different from gen 1 vs gen 2. Know the eco rims are light weight but 175$ a rim would be 1 rim a week lol. Thank you again sir.

[@WalkerOutdoors]

Awesome channel you turned me onto cleaning the throttle plate which fixed my daughters car. She had been driving it in the automatic six speed mode because of the stumbling on restart now that we fixed it the car shuts off at a stoplight but you have to manually put it in park and restart it with the key. What has caused this if you have time thank you.

[@davesworld2132]

When she lets up on the brake pedal it does not restart? I have a start stop disable kit as well. This will stop it from shutting off . supercruzesstore.com/products/auto-start-stop-delete-disables-the-start-stop-function

[@richardfrausto747]

Wished I would've seen this video like a month ago. I was having low boost code and started to chase the problem. 2017 LT auto, installed the chevy cold air but no tune yet, before the code. Replaced inlet outlet tubes of the intercooler, and replaced the turbocharger with stock one. My cruze has 110k+ as I commute a total of 120 miles every work day. Thanks Dave for your knowledge of the common problems again I became aware of these issues on my own and with research.

[@davesworld2132]

That bill hurts!!!!!! But glad you figured it out.

[@richardfrausto747]

Well to tell you the truth I paid nothing for the parts. If I told you how I am able to do this I think you would block me from your channel.

[@davesworld2132]

@@richardfrausto747 lol well I’m def intrigued!

[@richardfrausto747]

Dave, ok here i go. I am a parts supervisor for a large fleet operator, with a direct connection to ordering from GM over the years I order repair parts for gm. Now the cruze is no longer in production, our company has done warranty work. So I have so called obsolete gm parts which I take, since our agreement with GM I cannot return. Outside of a new engine or the transmission I don't have in stock. So that's my story. I do plan on getting your intercooler pipes and maybe the intercooler,.

[@davesworld2132]

@@richardfrausto747 now that I love!!!!!! Jelly!

[@gabrieldossantos2074]

Just came across this videos , what a savior in this community 💯💯💯

[@davesworld2132]

Thank you very much. I appreciate you watching.

[@AustinCantu804]

And with a p1101 definitely look at throttle body and make sure it is clean. I have seen a bunch of 1.5 vehicles with that code set for throttle body air flow compensation

[@528Chris]

Yea I been dealing with dat code for over 2 years

[@fireworks234]

Great video. Probably going to grab that catch can as I’m trying to monitor the PCV system a bit.

[@davesworld2132]

Hi thank you for watching. I tried to make this can as easy to use and install.

[@Bambi-j5e]

Happy to join the community man love the content

[@davesworld2132]

I appreciate you being here!!!!

[@technicallyeco.2751]

Waitin see big turbo,and full build 💪

[@davesworld2132]

Me too!!! Lol filmed a lot of stuff. Edition everything as we type!

[@BenKlassen1]

Cruze owner's manual says to change the spark plugs every 60k miles, BTW. Thanks for the video!

[@davesworld2132]

Yea the manual unfortunately is wrong about a lot. I would do them every 25,000 miles on any turbo car especially since the 1.4 is known for running dirty air due to oil intrusion.

[@BenKlassen1]

@davesworld2132 Good to know, thanks. I'll do that. I just had them done by somebody else and mechanics, in spite of my requests, are loathe to give me the old parts so I can examine them and learn. I bought the car used and I'm just trying to learn all of the common problems and issues with these to try not to lose my shirt maintaining it. I like the car. Here in the mountains of Utah, it performs well for its small displacement.

[@davesworld2132]

A lot of times the manual is a general guide line. But it does not take into account location, seasons, driving style, and age of the driver. Most of the time the maintenance recommendations are very off because of this. It's good to learn because the more you know the better you can treat the car. Always keep in touch if you ever need some help. @@BenKlassen1

[@saintjona7118]

Great video, brother!! 👍 actually brought up an issue that I didn't think was one but I'll tell you about it.

[@davesworld2132]

Sure look forward to hearing from you!

[@lrn_news9171]

I'm looking at a 2017 Cruze with 75,000 km on it and it's a manual. I have all the carfax history on it. No major repairs just regular maintenance stuff. Do you think that's a good purchase? I heard that manual is more reliable when it comes to avoiding transmission issues.

[@davesworld2132]

Does it have a lot of oil change and transmission flush history?

[@lrn_news9171]

@@davesworld2132 Yeah all available on CarFax I checked the whole history online. The previous owner followed it by the letter and no breakdowns, just maintenance stuff. First oil change was done at around 3k miles

[@lrn_news9171]

Would you say that 2018 is the most reliable year for Cruze? I've been researching this extensively it it says everywhere that the 2018 year model was above average reliability, and actually competed with other compact cars fairly well. 2017 seems to be pretty decent too. 2016 has a bad rating. I'm looking to purchase a Cruze in the 60k to 70k mile range

[@davesworld2132]

18 because they changed the engine it also in 19 they changed the nose to a different style and some of the electronics. I would go 18 if you can. 17 has known engine issues.

[@lrn_news9171]

@@davesworld2132 Thanks that was my choice based on my research. And I have found tricks to disable the auto stop start. consumer reports they rank 2018 4th out of 10 best compact cars for reliability

[@lrn_news9171]

@@davesworld2132 Would you say the average lifespan of the 2018 cruze is upwards of 150,000 to 200,000 miles? I live in Canada and km here so that would be idk roughly 300,000 km or something like that

[@G59Ghost]

i got 2014 lt rs and i got a after market coil pack because the original one was looking a little rough with the springs and i got new spark plugs and the new was really loud “tuck tuck tuck” noise.. everytime i pressed on the gas but after i out the original one in it works perfectly. i’m guessing it was the spark plugs but i did buy that stuff because i buy the aluminum valve cover gasket and that’s been working perfectly ever since. if anybody sees this i’d recommend doing that 😂❤

[@davesworld2132]

Check to law sure the spark plugs are not loose as well.

[@Rancid_Ninja]

Yea torque wrench on the spark plugs and they are known to get loose overtime, I changed my plugs at 90k and at 101k I had a weird noise on startup so I started googling and came to find out two of my plugs were slightly looser than the torque spec, still tight but not at tight as the others and it's been a week and I have not heard the noise again

[@rubenjimenez1568]

I have a gen 1, and already checked for air leaks , exhaust, etc, and I have non, was thinking it can be my wastegate that is worn out, everytime I accelerate I have so much lag or if I’m cruising around 45mph or so and I let go of the gas, I lose power and have to floor it just to upshift and get me power to accelerate, as well as going uphill, what do you think it can be? Don’t have a check engine on btw, Thanks.

[@davesworld2132]

Could be that also check your spark plugs and fuel pressure. Don't just assume its a part with out doing some basic checks first. Also check your air filter.

[@steverandall5814]

A common problem on Ford Panther platforms is when people change from the OEM airbox to a cone filter, they put way too much oil on the filter. Since the MAF sensor is only 3 inches downstream from the filter, it gets gummed up with oil from the cone filter. The car runs like crap and throws a OBDII code. I can easily see this happening in this application as well.

[@davesworld2132]

Yea I've seen that before. I have a 4.6 Saleen engine in my garage and I've been tinkering with that intake system and can def see that happening to that style maf.

[@Rancid_Ninja]

I haven't been on the forums for a while but I remember them recommending the dry injen filter instead of the oiled k&n filter probably for that reason

[@AreEff1987]

I feel like i need all these upgrades. I just bought a used 2014 cruze LT 1.4 and unfortunately i noticed after buying that it pulls or bumps on acceleration around 40kmph and sometimes 60kms but runs smooth after that. Im also not comfortable with sll the plastic i hear deteriorates because it runs hot snd would change to aluminum or metal after market replacements

[@davesworld2132]

@@AreEff1987 def contact me through my website I can help you. www.SuperCruzes.com

[@mathieutasse]

Hi Dave! I have a 16 Cruze with 24k miles... and i have a thicking sound .... did you know what is causing that... loose timing chain?

[@davesworld2132]

Need to hear it. Also are you the Gen 1 or gen 2 2016? Both models came out that year at the same time

[@mathieutasse]

It's the 2nd Gen Cruze!!! I can send you a video if you want!

[@davesworld2132]

@@mathieutasse hi [e-mail] is best to reach me. This is Jerilyn Dave’s wife.

[@Fopeano]

4:23 I had a car with this engine in the shop with the code for an underboost condition, and the problem wasn't a crack, but the play you're talking about where the actuator shaft passes through the turbine housing. It had become so loose that when the wastegate flap was supposed to be sealed flat around the hole, it was actually cocked at an angle and had an obvious gap around 2/3 of the sealing surface. This obviously allowed exhaust to leak around the turbine even when it was supposed to getting maximum flow. I had to pull the downpipe off and use an inspection mirror and pocket flashlight to see it. The amazing thing was that NAPA stocked a Dorman aftermarket turbo kit with all the gaskets and trimmings for about $800 that fixed it.

[@davesworld2132]

Hey what’s up! I have a subscriber with that exact same problem. After going back-and-forth with him we realized that buying an aftermarket bigger turbo was only a few bucks more. So he went that route instead of an oem type. But same fix. What your describing is exactly why I put that little social media clip in. How how much better did it run after you made the repair?

[@Fopeano]

@@davesworld2132 It was only a marginal difference, although I was not really evaluating it's performance. All anybody cared about in that case was fixing the check engine light.

[@davesworld2132]

@@Fopeano lol “regular folk” take check engine lights way too serious lol i’ve been playing around with spark plug gap’s this weekend it’s amazing how changing a gap ever so slightly increases or decreases performance substantially.

[@Fopeano]

@Yeah Right yup, the first search result is the same Dorman kit for $504.99. I guess that's the cost of getting it in 15 minutes and fixing the car on the spot, which is the best way for any shop to efficiently do business. I'll bring this up to my front end people today just to let them know.

[@Mikaeel84]

New top of the line plugs, had mechanic monitor computer while running said it was getting too much air then not enough air when driving, cleaned mass air flow sensor properly, replaced air pressure/temp sensor, replaced gas pedal, ran sea foam through throttle body while holding at 2k rpm until can was gone and drove with spirited acceleration after as can says to do, replaced throttle body. No codes, stutters at low rpm when I try to get up on it. Seems to only happen when there is high torque demand at low rpm. If I downshift and get up on it everything is fine. Seems like it's running rich when I drive between 2-3k too much. Also ran compression test and was good.(2018 1.4 LT Cruze)

[@davesworld2132]

What wastegate do you have on the car?

[@Mikaeel84]

@@davesworld2132 idk but if you think that could be the problem I will look into that next.

[@davesworld2132]

@@Mikaeel84 possibly. Supercruzes.com has them but message Jerilyn. She can further diagnose the problem. It’s easier then through the comments.

[@Mikaeel84]

@@davesworld2132 ok thanks

[@cesarv475]

I think one problem I ran into with my build was the shifter. I don’t remember if your short throw shifter video pointed it out but for an amateur I messed up the shift linkage position for the reverse lockout so I wouldn’t catch gears properly. First, second, and reverse were misaligned and I had to go back in and adjust off of first or reverse.

[@davesworld2132]

Yes I had that problem as well. I also ran into a situation where the shifter was fine and then later on when winter came and it got very cold out I couldn’t get into reverse again. Then I had to readjust.

[@MrLuisgutierrez1970]

Hey did you ever do a video on The injectors? I have a imbalance fuel code

[@davesworld2132]

I would recommend emailing me through my website so I can help diagnose your car better

[@nickgrayy]

14 Cruze LTZ RS auto, runs smooth no codes, 32mpg or less going 70mph. Same mpg going 65. 35mpg 50mpg. I’ve lost boost a couple times. Never an engine light. Does have oil leak. I noticed I haven’t heard the shutters close. But that shouldn’t take away several mpg. So I’m thinking something turbo and piping related I’m not sure. So many things

[@davesworld2132]

If you could email me through my website we can diagnose the car a little bit better than on KZbin. I think I know what may be wrong but I need pictures of your engine bay

[@bernardaflores1720]

The Volvo OEM intercooler has a small weep hole that allows to drain any moisture collected inside. VW products do not have this feature and they collect so much water that it fails to start. Volvo also reverse the piping to prevent this problem on colder weather locations.

[@davesworld2132]

Interesting. I wonder if a catch can system would help as well.

[@bernardaflores1720]

@@davesworld2132 The weep hole drains the moisture before it enters the engine, catch can collects the inside moisture. They booth work, just a little different!

[@davesworld2132]

@@bernardaflores1720 I was wondering how often the weep hole might clog

[@bernardaflores1720]

@@davesworld2132 I have never heard of the weep hole clogging up, It might be possible if by ice/ moisture it will unclog when temps raise.

[@JasonAlvarez-f5w]

Question, I just noticed oil leaking from the piping connecting to the inter cooler on D/S, it seems excessive where can I start to check for?

[@davesworld2132]

You need a PCV reroute and upgraded intercooler pipes. You will start having boost issues. Check out www.supercruzes.com I have a few things that will fix those issues.

[@davidlangley2722]

Could you please list all of the problems that you know of that would cause a 2013 Cruze LT turbo I4 to overheat. I have changed the water valve, water pump, thermostat, temperature sensor at radiator and recovery tank. I’m trying to fix the car myself. It has around 98,000 miles on it. Thanks

[@davesworld2132]

Contact me at [e-mail] so I can help look over your car.

[@travfromthelou]

I have a 2019, was throwing p1101 codes, me and my buddy took a part the throttle body, cleaned that, cleaned the mas, replaced the engine air filter, cabin air filter, hopefully no more idiot lights.

[@davesworld2132]

Keep me posted if you need any help.

[@travfromthelou]

@@davesworld2132 I have two friends that are mechanics. But thank you, this tool at Firestone out here was far from helpful, I actually called their corporate office because he was such a asshole.

[@davesworld2132]

@@travfromthelou ouch. Sorry they acted that way.

[@travfromthelou]

@@davesworld2132 their loss. I'll never spend another dollar with them, I just asked if they could tell me what voltage range my mas was reading at, after spending over 400 dollars on shit with them a few months ago, and they pretty much told me to either leave it for two days or pound sand. So fuck em.

[@davesworld2132]

@@travfromthelou damn that sucks

[@iamjadeenn]

I don't have any codes, but my 17' Cruze accelerates pretty slow. It has 53k miles, only thing I have done to it is AEM cold air intake. Could there still be a crack like you mentioned?

[@davesworld2132]

Possibly. Do you have any way to read boost ?

[@iamjadeenn]

@@davesworld2132 No but I am working on getting one

[@davesworld2132]

@@iamjadeenn That's the easiest way to tell Here is a link to a cheap way to install a gauge. kzbin.info/www/bejne/r5nRlKiup6ZpicU

[@SteveDavis8412]

I have a 2017 chevy cruze LS, about a month ago it had a service stabilitrack, and a cylinder 1 misfire code, black smoke was coming out the exhaust, shaking real bad, and losing power, got it home and parked it. A few hours later when i went out to start it, a crank over the key and it sounds like its trying to start but the engine doesnt crank over and run, it just tries and tries, but nothing happens, just replaced all spark plugs, the car is stock, always kept up with maintenance, please help

[@davesworld2132]

The problem on your car could actually have a few causes. It’s best to email me directly at [e-mail]

[@wildstang4609]

I got a 17 cruze that has a misfire with the stability traction on too .

[@davesworld2132]

What cylinder ?

[@wildstang4609]

@@davesworld2132 cylinder one

[@davesworld2132]

@@wildstang4609 watch this video and report back it should help a lot. kzbin.info/www/bejne/rX_RhHiBpp6DhLc

[@jersey00scraps]

Same here

[@brandyallison3643]

Ok so my daughter has a 2018 Chevy cruse she went to get her oil changed was driving homè few hours later whole car was vibrating took it back to where she got oil changed they told her the motor mount probably broke, which was not the case replaced all four coil packs, still didnt fix so we figured out needed to replace injector which we did and it seemed to dix the problem but it continues to leak gas, so we bought an o ring kit put all new ones on still leaking!!!! Any ideas or way to fix

[@davesworld2132]

@@brandyallison3643 any active codes in the ECM?

[@brandyallison3643]

B​@@davesworld2132yes and we have replaced all the coil pack, all spark plugs and all the injectors. Have spent about 500 bucks on it.

[@davesworld2132]

@@brandyallison3643 What are the codes?

[@itxmxui976]

Where did you get the spoiler??

[@davesworld2132]

Hi it was custom.

[@funkyjunky6574]

Bro any tips for supercruzing the sri v 1.6T

[@davesworld2132]

@@funkyjunky6574 yes. Email me through the website.

[@thor-grey]

I love you Dave. I NEEDED this.

[@Hollacomoestas2024]

Hey I have a question where's the weather temperature sensor located on a Chevy Cruze 2011 it was working fine and I had to change the antifreeze radiator !now it doesn't show me what the temperature outside is

[@davesworld2132]

Ambient temperature sensors are typically found on bumpers. If you email me at the website I can look a little closer I have both of my Gen ones

[@Hollacomoestas2024]

Thanks for responding to my question but I guess I found the sensor already I forgot to plug it in! Thanks again

[@davesworld2132]

@@Hollacomoestas2024 proud of you!!!!!

[@jacobsawtelle5429]

You already have a K&N filter that you said was dirty wash, let dry,oil , not too much oil it will mess with the mass airflow sensor

[@davesworld2132]

If your K&N looks winkled it's probably clogged up and sucking inward from vacuum.

[@andrereed8813]

Hi again, Thanks for sharing all this information. Well once again I have a question with my car. I have a 2016 malibu 1.5 turbocharger. I've been having issues with the car idling and not having or hardly boost. It feels as if the car lost its power running only on engine power and no turbo. Please help me. I cant seem to figure it out. Not mechanically inclined. I can follow directions and learn as I go. Please help.

[@davesworld2132]

Hello it’s your wastegate. That used to be non serviceable but I actually have upgraded custom ones. These will fix that problem and increase your boost. Here is a link. supercruzesstore.com/products/malibu-1-5-and-2-0-upgraded-wastegates

[@kcard707]

I think I may have a cracked piston in my 2017 cruze. I'm trying to perform a compression test, but there aren't any fuel pump fuses/relay to pull to do so. Do you know how I can disable the fuel system to do a compression test?

[@davesworld2132]

You have a wire harness going to the injectors you can just unplug that at the fuel rail.

[@kcard707]

@@davesworld2132 Thank you! Maybe you can provide a little insight. I have a P0301 code and a stability/ traction control message on the dash. On the highway when driving around 60 mph if I attempt to accelerate the car starts shaking violently, like it is not getting enough fuel, kind of similar to a clutch pedal, not being pressed in when coming to a stop I've read article, suggesting that this might indicate a cracked piston around the ring lands. Have you encountered this before?

[@davesworld2132]

@@kcard707 When is the last time you had a tuneup? And when is the last time you ever changed a coil? Also just an FYI it is very common to have injector problems on these engines

[@kcard707]

@@davesworld2132 the air filter,plugs, and mass airflow sensor (had a p1101 that is gone now)were all changed in an effort to try to fix this issue less thank 1k miles ago. The car has 69k on the engine and it's all bone stock. It'll drive fine when cold, but once it's at operating temp the issue becomes evident. I even tried gaping plugs between .025,028, and 030 and the issue is still there. Compression came out to 140-150 but what worries me that once the car is at operating temp you can see blow by come out the dipstick tube. How would I go about getting the injectors cleaned?

[@davesworld2132]

@@kcard707 do all the plugs match in color when you remove them?

[@jakes_trains]

What is a good scanner and or programmer for a 2nd gen Cruze owner?

[@davesworld2132]

That depends. Are planning to have your car tuned?

[@jakes_trains]

@@davesworld2132 maybe at some point in time for a cold air but not 100% sure currently

[@thegreatretaliator2905]

Where is chevy cruze 2019 baro sensor at? I have search picture/vids of locations and can't find it, not even the map sensor. I'm starting to think it dosent have either, yet the engine light shows code for p2227 p2229(baro sensor)

[@davesworld2132]

The intake . And technically the boost sensor on the intercooler.

[@efrainvillarroeldemayo8149]

Hello there. I am driving a Chevy cruze LT 1.4 turbo, 2014 . When I over pass 50km/hr a second sound apart of the engine started sounding. Sounds like roughly. What can it be?

[@davesworld2132]

Would need more info. Message me on my website so I can further diagnose. Www.supercruzes.com

[@FromTheGroundUp365]

Do you know where the fuel pump is located?

[@davesworld2132]

What year is your car?

[@FromTheGroundUp365]

2017 chevy cruz LT 1.4L Turbo @@davesworld2132

[@FromTheGroundUp365]

The vehical has been running rough and sputtering and dying, it isnt throwing any misfire codes just a P1101 code, i cleaned the throttle body but didnt seem to do much good. symptoms remind me of a failing fuel pump. but the fuel pump looks different than a normal tank mounted fuel pump.

[@davesworld2132]

@@FromTheGroundUp365 that’s a Maf issue. What year is your car?

[@FromTheGroundUp365]

2017

[@carlosjuarez-u1w]

Thank you for your advising 👍 good tips 👏

[@AmuricanZomB]

I keep throwing a rod knock code. I've replaced the sensor twice. And replaced the pigtail once. I can't hear a knock. All I've done to mine is a cold air intake.

[@davesworld2132]

No tune ?

[@AmuricanZomB]

@@davesworld2132 I haven't done that yet. I didn't think it needed one immediately. Was I wrong? 😅

[@oralwayne7273]

Can I remove my turbo system and set it like a stock cruz that dont have turbos

[@davesworld2132]

What year is your car?

[@oralwayne7273]

2013

[@davesworld2132]

@@oralwayne7273 technically you can use the 1.8 parts to do that and change your tune for no turbo. But why get rid of your current turbo?

[@johnmitchell8925]

@@davesworld2132 Probably because they have been reading all the comments 🤣

[@davesworld2132]

@@johnmitchell8925 lol

[@robbyestanislao9754]

Do you have any videos replacing the clutch on a Chevy Cruz?

[@davesworld2132]

No but maybe next month I can film something

[@glennmcfadden5355]

So I have a issue. I know I need to replace my intercooler tube to throttle body it’s no good but my problem is after about 1 hour of driving it goes into reduce power like I no longer have turbo power. I do sometimes get the turbo code. Could this be my diverter valve?

[@davesworld2132]

@@glennmcfadden5355 could be a few things. My number is on the website if you want me to diagnose the car with you.

[@TheMazzimM]

Great tips, Great vid: Score 99.9%, if you want to add that 0.1%, edit video: "PCV System" not "PVC System".

[@davesworld2132]

Yea I do that all the time! Even in the same sentence.

[@collinwoodhurst6243]

So I just bought a 2011 cherry Cruze manual and I can me in 4th gear and it won’t rev out over 2,800 and I can floor it and barely goes anywhere

[@davesworld2132]

It’s probably low on power. Message me through the site so I can diagnose your car. Www.supercruzes.com

[@406rckrew3]

Loving the video was super helpful but I could really really use help for some reason I'm getting the jitters at low idle or low rpm and it's giving miss fire codes check engine flash and stabilitrak disables but if I get on it more it will act normal and no lights plz help

[@davesworld2132]

When is the last time your spark plugs were changed?

[@406rckrew3]

@@davesworld2132 I just replaced the spark plugs last week

[@davesworld2132]

@@406rckrew3 what gap are they?

[@406rckrew3]

@Dave’s World .051 on acdelco iridium, and the issues will go away for a couple of days they aren't always present

[@406rckrew3]

@Dave’s World .051 on acdelco iridium, and the issues will go away for a couple of days they aren't always present

[@aaronmiller1947]

Have a 2017 Chevy Cruze LT. have a P2099 code and a p1101 code I am boggling my brain trying to figure it out exactly is the root of the problem help

[@davesworld2132]

Sounds like you need a charge pipe. I bet it's leaking, Message me on my website www.supercruzes.com

[@nitrojoeZ18]

Cracks are normal on the 1.4 turbo. Gm bulletin

[@davesworld2132]

Normal yes but you can’t keep your car running right if you have them. It’s not Al for a crack to happen. At that point your turbo needs repair.

[@LouellaCarter-j7l]

Is there a recall on the chevrolet cruze 2016

[@davesworld2132]

There could be . Depending on the part.

[@abhimanyusapalok5322]

My Cruze 2017 LT is having issues from last 1 year. Everytime my car comes to a stop and the autostop system kicks in, the car engine complete shuts off and I have to start the engine again. This causes huge problem at traffic signals and stop signs. I have taken my car to 2 different mechanisms who charged me almost 1000$ total and the issue is still not fixed. Is this a known chevy issue? One guy told me it could be air intake issue and one mechanic told me the accelerator pedal needs to be changed.

[@davesworld2132]

@@abhimanyusapalok5322 I can have that tuned off completely and give the car some extra power as well. Or just tune it off.

[@truthsought368]

@@davesworld2132I have a 2018 red line hatchback edition that does this but makes a loud screatching noise , any suggestions on how to fix this? It doesn’t do it every time it’s infrequent. I was thinking transmission but I’m no mechanic it does seem to be the auto stop feature itself. Can it be turned off in this model?

[@davesworld2132]

@@truthsought368 have any active codes ?

[@truthsought368]

@@davesworld2132 yes I forget which one I will check late today update you tonight. I got something changed last year because the mechanic said there was gas where it shouldn’t be I will get that info too. The engine light has been on for forever tbh

[@truthsought368]

@@davesworld2132 still gotta get the codes today but a charcoal canister was replaced last October…check engine light came on again at the end of that week lol never took it back because it’s been a headache the noise only started this year. Let u know the codes today

[@jacobkilcrease1656]

Fuel injectors 😭😭😭 just had to have mine replaced in my 17 cost me 2k 😭😭😭 this was September 2022 my ass is still sore !!

[@davesworld2132]

Good Lawd!!!! Dealer ?

[@johnmitchell8925]

how many miles. Thats important information 🧐

[@davesworld2132]

@@johnmitchell8925 be seen as low as 20,000 miles and as high as 70,000

[@empowered3206]

I have a 2015 cruze ls automatic that my car rattles if I turn my thermostat on with no check engine light on if I put my car in reverse or drive it rattles but when I turn my thermostat off u don't hear the rattling noise I had my transmission mount replaced in 2022 can u help me?

[@davesworld2132]

It may be your AC compressor. Sometimes when you use the heat the compressor turns on.

[@empowered3206]

@@davesworld2132 thank u

[@davesworld2132]

@@empowered3206 No problem. Comment if you ever need anything

[@davidmcgrath7129]

I have a 2011 1.4 keeps stalling after a while starts again runs great for a while then stalls again and there are no codes

[@davesworld2132]

May be a bad maf but contact me through the site to diagnose

[@CubannKay]

What about code P0327 ?

[@davesworld2132]

That's a knock sensor code so you have a fuel issue or possibly a 12 volt wire/sensor issue. Typically its a fuel issue most commonly.

[@CubannKay]

@@davesworld2132 I’ve took it everywhere, I’ve got a new ecm, changed my knock, map & boost sensor, that’s wasn’t the problem I had an oil leak from my vacuum pump, I changed that but my car is still not running properly, what it’s doing is accelerating really really slow like not going past 2rpm and then when It picks up it’s fine.. please help, I’m filling out your car sponsor application rn because I love my car and can’t and finna send everything including pics of my car to your email.. i been had my car for 4 years and now im having this issue that can’t nobody seem to help me fix..

[@sameereng81]

Thanks sir for this informative video

[@davesworld2132]

Thank you for watching

[@webfusion]

2018 chevy cruze diesel P2418 code issue any idea on this code?

[@davesworld2132]

Your evap valve may be faulty or you have an evap leak.

[@manuelsheehan912]

I replaced my oil pan n put in a new 1. I also changed my fuel filter. Once i put everything back together. It started but died out. My question is changing a oil pan from a diesel n a normal cruze ,is there a huge difference

[@davesworld2132]

No but on the diesel you may have lost fuel prime. Do you have any codes?

[@manuelsheehan912]

I had a feeling it had something to do with the fuel. But ive always changed my fuel filter myself... it cranked over than maybe a min later a bogged out. I've changed my filter a few times but never had this problem

[@manuelsheehan912]

Funny thing no codes. But my battery said it was dead and the charging system said was having a issue.

[@manuelsheehan912]

Any suggestions? When i get it to start i try to rev it a little bit but does the same thing. Just boggs out. Never had a issue with my battery and i was surprised it showed up

[@davesworld2132]

@@manuelsheehan912 Have a way to read fuel pressure or oil pressure with a tool?

[@cruey7]

Very informative thanks!

[@davesworld2132]

I AM GROOT!

[@rhcpimprovandcovers1063]

2016 cruze lt gen 2 engine. It completely shuts down at all stops and redlights. Other than that it drives well, no engine codes either. Whats going on!?!?!??

[@davesworld2132]

@@rhcpimprovandcovers1063 engine start stop. This is normal. I have a tune available that can remove that function.

[@rhcpimprovandcovers1063]

@@davesworld2132 im saying it shuts down, has to be moved to neutral or park for a restart.

[@rhcpimprovandcovers1063]

Sometimes violently like a car bumps me from behind

[@rhcpimprovandcovers1063]

@@davesworld2132 it idles great in park, usually but not always shuts down when i move it to drive. I have to quickly give it gas when i shift to drive. Almost always shuts off at stops and i move it to neutral to turn the car back on and gas it a tad when i shift it to drive so it doesnt stall

[@davesworld2132]

@@rhcpimprovandcovers1063 any codes in the ECM. It won’t shutdown in park. Only in drive if it’s start stop function.

[@KC-jq9kw]

That K&N filter is made to clean it, and then re-oil with their red colored oil, and you put it back in. I don't get the reason for it to be all dirty and then to by a cheap replacement for a great air filter that would be back to new if you just rinsed out the dirt and reapplied new oil. The cleaner and oil kit is cheap.

[@davesworld2132]

@@KC-jq9kw Any filters that have that type of solution is great but the problem is a lot of people use it incorrectly. The solution messes up a mass airflow sensor.

[@patdarling2036]

That was kool to know that about 02 sensor on cruze God bless brothier

[@patdarling2036]

Please talk about o2 sensor and cat on cruze

[@davesworld2132]

Thanks for watching.

[@theshorttruths]

My code is P0325 it’s knock sensor it comes and goes i’ve gone a month with it being fine and today I accelerated and it came up and when I accelerate it’s slower that normal.

[@davesworld2132]

What fuel do you run and what year is your car?

[@theshorttruths]

@@davesworld2132 it’s 2019 and jus 87

[@davesworld2132]

@@theshorttruths do you have a tune? And I would recommend going to 93 to see if the code goes away first.

[@theshorttruths]

@@davesworld2132 why 93

[@davesworld2132]

@@theshorttruths increase the octane to help with knock.

[@FromTheGroundUp365]

id like to pick your brain about whats happening to my cruz. i can not figure it out.

[@davesworld2132]

Sure. What’s up?

[@tylerwhite7367]

The code that keeps coming up for me is P0299. Usually happens when I accelerate and once the code comes up the car drives extremely sluggish and doesn’t want to move at all.

[@tylerwhite7367]

To add this code goes away and comes back. Some days the car drives great and other days it drives sluggish and that’s usually when the check engine light comes back on and gives me the code p0299.

[@davesworld2132]

@@tylerwhite7367 Are you running a cold air intake?

[@tylerwhite7367]

@@davesworld2132 yes I am

[@tylerwhite7367]

I was getting this code before the cold air intake though.

[@davesworld2132]

@@tylerwhite7367 It could be a few different things. It could be a dirty mass airflow sensor. It could be an intake leak. It could also be an exhaust leak. Is the car running like crap?

[@Wayniemann]

My Cruz is down and they think it's the motor, but I feel they misdiagnosed

[@Wayniemann]

Please help

[@davesworld2132]

@@Wayniemann If you go on my website my contact information is on the bottom of most of the pages I can help you diagnose

[@jessekors]

Hey you are the creepy tick ticks videos!!

[@brandon893]

So, rotate my brakes will do brotha

[@johnmitchell2741]

he was having trouble with his car he wrecked it trouble

[@davesworld2132]

Who did?

[@czerus2233]

Wow no wonder when I opened up my transmission solenoids and took out this plastic tube my boost leak check engine suddenly disappeared like it didn't even bother coming back on 🤔🤨😯😲

[@davesworld2132]

Interesting. What trans was it?

[@czerus2233]

@@davesworld2132 It's 2017 Cruze 6-speed AT 1.4L. I was to clean the solenoids and needed to remove the plastic tubing from throttle body to intercooler and having a engine code before hand for boost leak P0299. But probably because I disconnected the battery for about a week that the code disappeared I don't know and when I hook it back no more engine code P0299. I'm about to get the transmission rebuilt, the previous owners might've beat the crap on her but I wanna correct as the engine really is running good. That plastic tube is crap 😂🤣

[@davesworld2132]

@@czerus2233 Do you have any transmission codes?

[@czerus2233]

@@davesworld2132 the whole time I owned the car since last year only the P0229 only but the transmission started to miss 5th gear randomly, and jerks shifting the 3rd all the time. It was back in January when it gets severe even 6th gear wobble/shakes (when the car is underload going up a slope or with passengers) the car along with 5th gear so technically I can only drive down the side streets as the 4th gear only goes 50mph @60mph it just screams and in need to shift to the next but like I said shifting to 5th gear will make the car shake violently. Then one night on my way home I really wanted the transmission code to show up so I kinda push the 5th gear till the car went limp mode (It only show on the Dash "L" and not the usual "L1,L2, etc) and there it was, P0796 and P0700, one is for Pressure Solenoid failure and Failure or open circuit in TCM for the second one.

[@davesworld2132]

@@czerus2233 Oh ok that makes sense. At first I thought you meant the intake caused leak code caused the problem. Are you doing the rebuild?