Common Firmware installation problems

[@christopherlucas6209]

Great job !!! Great instructional video.....very thourough. ..... i jus recently started working on KM

[@stuinNorway]

Pressing the yellow reset key on start will never help it load firmware, all that will do is launch trouble reset mode.

[@peacockprintings605]

Currently having an issue where a c754 won’t completely turn on. Blank screen. But when the main switch is turned on the machine shows power but nothing to the screen or to show that it’s fully on.plz help me

[@abdeljalilouj9558]

Hi how can i get firmwaire plz !!

[@mihalachebogdan1]

You have to contact a Konica service partner or contact Konica directly to get the firmware. To my knowledge there is no public way to download the firmware.

[@ouedraogoamadou1936]

Hello, I need its Bizhub C360i firmware because when loading the startup crashes in the middle and can stay for hours without moving. Thank you for helping me with the FW link because I was tired of looking for it

[@DanielSantos-xs2yt]

Do you know where is the USB port for firmware updates on Bizhub C266i? I'm checking the machine and I only see one beside the control panel of the machine.

[@sibandadouglas6645]

Hi, how do I download the firmware for Bizhub 601/751

[@i7tiInformatica]

Hello, is there this *.prn file for Minota C368? I've already tried recording several firmware with different pendrives and on all USB ports, but the printer doesn't go into firmware mode.

[@ogomaabala2753]

Hello thank you for the video. How could I get konica c220 firmware for download?

[@topspeed3679]

How can I get firmware for c454e kindly assist

[@mihalachebogdan1]

You have to contact a Konica service partner or contact Konica directly to get the firmware. To my knowledge there is no public way to download the firmware.

[@dangphong-shop]

Hi, Do you have bizhub c1085 firmware?

[@dronesturrialba]

Hola, saludos desde Costa Rica, usted me puede facilitar con el costo correspondiente el firmware de la Konica Bizhub C754, me interesa instalarlo, ya que tengo averiado el mismo. Gracias.

[@NdubuisiMadu]

Please, I want Konica Minolta Bizhub C654e firmware.

[@nathansaunders943]

You guys work on stuff besides Konica Minolta products?

[@Supertechs3]

Pretty much Konica only, we do some Kyocera printers but not that often.

[@iamurwish]

Please help with error on km c558 after resetting machine error c-d390 comes up then shows c-40c3 help would be much appreciated 🙏

[@stuinNorway]

How did you reset machine ? cd390 is an NVRAM error, machine should go to "Recover data" itself. 40c3 is a checksum error. Both likely if you replace main board and install a used board.... Do a "trouble reset" boot and if needed go to service mode from there and do a fresh "Data clear"

[@iamurwish]

@@stuinNorway thanks a ton 👍will do it

[@gabrielchristopher9363]

Hello Supertech, If i forgot to open the screw to gain access for the USB port and i mistakenly used the other USB port around it, will it cause any issues? Why am asking is because since i made that mistaken, i discovered that my C554 has refused to boot. It only boots to 2 or 4 shark tank on the screen panel. Any Suggestions on this issue? Thank you sir

[@Supertechs3]

Turn off the machine and try to update the firmware the correct way. Does it update or is it still stuck?

[@gabrielchristopher9363]

@@Supertechs3 After updating the Konica Minolta C554, it now goes beyond the 2 shark tank. Now it boots to five shark tanks and the official Konica Minolta logo at the top left of the screen but gets stuck and doesn't go beyond this point. I have turned off the machine and turned it back ON again but it still gets stuck at the Konica Minolta logo and 5 shark tanks. I don't know if there is a specific firmware or something I need to do to resolve this issue. I miss the machine badly.

[@ivanxavier234]

Please I need firmware update bizhu c224e

[@SurinderSingh-pg1yx]

I need

[@mihalachebogdan1]

You have to contact a Konica service partner or contact Konica directly to get the firmware. To my knowledge there is no public way to download the firmware.

[@ouedraogoamadou1936]

Micrologiciel Bizhub C360i bonjour , jai besion de son Micrologiciel Bizhub C360i car au cargement du demarage se plante au millieu et peux rester pendant des heures sans bouger. mer ci de m'aider avec le lien du FW car j'ai chercher ca fatiguer

[@mysultanmypomade2973]

Firmware 223/283/363/423 boleh tolong bagikan

[@grafbrinds]

download my friend, download

[@alvaroarboleda6191]

Bueno

[@SurinderSingh-pg1yx]

C224e firmware

[@jeffersonhenrique8699]

hi bro you have file a789be.tar?

[@almaschap-c1m]

Hello thank you for the video. How could I get konica c454e firmware for download?

[@ouedraogoamadou1936]

Hello, I need its Bizhub C360i firmware because when loading the startup crashes in the middle and can stay for hours without moving. Thank you for helping me with the FW link because I was tired of looking for it

[@lthangkamtunngaihte6967]

Please how can i get c250i firmware.