Common Mini Humidifier Issues and solutions (Ultrasonic aroma diffuser Filter version)

Issue 1: add water in but no mist out - Cotton Filter is dry
Issue 2: Wet the cotton filter but still no mist out - Spring is missed
Issue 3: Filter is wet, spring is there, but no mist out - Tube not fully inserted
Issue 4: Filter is wet, spring is there, but no mist out - Spring installed upside down
Issue 5: Didn't do that before, but do the steps later, no mist out - Product damaged
Issue 6: Add water and essential oils But no fragrance

[@storyhub846]

It works thanks, I never knew that I need to wet the cotton

[@klscriviner]

Useful to know. I will remember to wet the cotton first before using it. Thank you. 😊😊

[@user-nv2ok5ii8g]

Thank you so much for your information

[@moemoeanisong]

Solved my problem, thanks!

[@BurakKhan172]

Thank u yr u solved my problem

[@samantha3000s]

Very helpful

[@Santina459]

Here 😊😊 This is helpful

[@nightstar6900]

Thanks

[@lasttofirst3335]

thx

[@SalmaKhan-xj6kt]

My diffuser suddenly stop smokes come out...what to do

[@nishasharma2166]

My issue is that my diffuser nozzle is break down how can i fix it?

[@napaea9460]

Wowwww! Tip #1! I even had a suspicion that it needed to be wet and I kept it in the unit with the water just sitting there for 2 days! and it didn’t work! ONLY when I took it out and soaked both ends for a few seconds it worked!! I even tried to return it but they wouldn’t take cus it’s a cheap store! There was a whole adventure with that whereas all that was needed to add to the instructions was to SOAK the tube!! 😵‍💫😵‍💫😵‍💫

[@entulyse]

The operating instructions in our manual all explain about soaking the cotton filter inside the tube, perhaps the instructions from different manufacturers vary.

[@napaea9460]

@@entulyse yea it was Miniso

[@maryscott49]

Mine hasn't got a spring ...?can I buy a replacement?

[@entulyse]

you can check the inner diameter of the tube in your product. Then, refer to the inner diameter to buy a spring that can fit inside. The height of the spring should be around 1cm, in a compressed state is approximately 2-3mm. A simpler solution is to use a spring from a pen as a substitute, and it should work fine in most cases.

[@alairejosephalaire8409]

What if I have removed the aluminium steel on the top of the humidifier?😢

[@entulyse]

broken then.

[@gladysalfaro3021]

Se consigue el aluminio de la parte superior del humidificador?

[@gladysalfaro3021]

Se puede reemplazar por papel aluminio,?

[@entulyse]

@@gladysalfaro3021 Hola, la lámina de aluminio que mencionaste es un disco de atomización con función de vibración de alta frecuencia, no es una simple lámina de metal.

[@user-kc9nc2px7h]

What kind of cord i have one and was giving to me

[@entulyse]

Mostly a USB cord without a power adapter.

[@MsAnkrah]

I mistakenly created a hole at where the vapor is supposed to come from. Does it mean I can’t use it anymore??

[@entulyse]

yes

[@zuleikavergara6004]

the one I have doesn't turn on? What I can do

[@chaitanyakumarmoguluri4556]

I'm also facing the Same problem

[@Sainart20]

Mine is not turning on. Its new, i dont know whats the problem😢

[@entulyse]

If the LED light doesn't turn on the first time you use it, there may be a quality issue with the product. Contact the seller for after-sales support.

[@TotoGabReal]

how to fix issue 5?

[@entulyse]

A feasible solution is to contact the seller for product replacement or replacement of parts. Since we cannot ascertain the product specifications, we are unable to recommend replacement part options to you.

[@chaitanyakumarmoguluri4556]

My diffuser is not turing on.. It's just giving me a blink of light for a second and turns off Please give any solution

[@entulyse]

It could be due to poor contact in the power supply section, or the touch switch being either insensitive or overly sensitive, resulting in multiple accidental touches that caused it to shut down directly.

[@chaitanyakumarmoguluri4556]

@@entulyse Thank you 😍

[@dharma8127]

Why is always in charge?

[@entulyse]

Because no battery inside.

[@IcExAryan]

MY CONTAINER MELTED :(