Comparative test Mini excavator RHINOCEROS XN 08

Comparative test of the Mini excavator RHINOCEROS XN 08 with a famous Japanese brand of mini excavators.
We are a french company, specialised in Mini Excavators RHINOCEROS. We have storages in Burgundy and close to Paris.
Feel free to contact us if you need more information:
www.minipellerhinoceros.com

[@jof2923]

Une marque qui fait un test honnête, c'est rare. Vous soulignez les points supérieurs de la Kubota, chapeau. C'est pour ça que votre machine m’intéresse, avec tous les travaux que j'ai à faire chez moi, je pense à en acheter une mais 6500 HT, ça me refroidit un peu.

[@MiniPellesRHINOCEROS]

Bonjour Monsieur, Nous vous remercions pour votre commentaire, nous attachons effectivement une attention toute particulière à être totalement transparent sur les Mini Pelles que nous proposons ! N'hésitez pas à nous contacter si vous souhaitez plus de renseignements sur la XN-08.

[@MiniPellesRHINOCEROS]

Plus d'informations disponibles sur notre site internet: www.minipellerhinoceros.com N'hésitez pas à nous contacter pour toutes demandes: 03 58 42 01 50

[@richysee]

The Kubota's hydraulic controls displayed better linearity characteristics than the Rhinoceros

[@MrToluen60]

Très intéressant. Par contre, pour que la comparaison soit équitable, il aurait fallut prendre la XN 10 (qui a un moteur kubota !). Si on parle du prix, je crois qu'il y a une grosse différence entre les 2 marques ...

[@DeepTask]

I just bought the XN08 from WSPowerline in Chester, the swing boom model it Comes with three buckets 200mm 300mm toothed digging buckets and a grading bucket + I bought attachments, a Ripper, a Grab and a quick hitch. The new XN08 comes with a 4 post roll bar/canopy and sound is now less than 90 decibel. The whole lot cost less than 1/2 of the cost of a kubota. As for parts and accessories, In stock and quickly available Oh so cheap!, I bought it for my house and grounds renovation, so longevity is not a problem.

[@Tiberemillet]

La lame vers l avant .mdr

[@ruytonx1]

why are you digging with the blade at the back? that is why you are rocking so much

[@jozijozi9642]

Kubota👍👍👍

[@pastorkeri]

If you just want a machine to play about small jobs the rhino be fine but the noise levels are too bad if you need a serious machine then you need the kubota .... personally the kubota for me ..... and it would be helpful if the operator was capable

[@ragnarmarnikulasson3626]

The rhino can come with 3 cylinder yanmar from factory, more power and way less noise

[@miky87sktgmail55]

It can even come with kubota engine

[@Świat-Rębaków]

Zle ustawiony kierunek kopania. Plug powinien byc z przodu zeby sie podeprzec a nie z tylu

[@douglasthompson2740]

Meaningless unless you give the price differential. Also need to compare a diesel version of the 08 to the Kubota diesel. Finally the difference in trailer and towtruck needed between the two, Parts availability and price would be helpful. Digging a ditch in farmland is really of no help.

[@MiniPellesRHINOCEROS]

Hello Sir, Prices of the Kubota excavators are depending on the different countries and reseller so it's hard to give a price difference. Considering their weight, both excavators have approximately the same weight and size and thus can be put on the same trailers of 1 ton capacity. Most of the parts of the XN08 are available in 48 hours in France, and the rest of the parts under one week, which is quite similar to Kubota which is proposing to send their parts in 48 hours.

[@FrodoTEST]

Both of them are diesels.. The Kubota has a nice 3 cyl engine meanwhile the Rhino has a 1 cylinder chinese Koop. It sound's terrible but gets the job done.

[@TF856]

You should be slicing off layers. Not digging from the bottom up against the face of the trench.

[@getboxbox125]

Bonjour et combien cyclindre pour la chinoise????

[@MiniPellesRHINOCEROS]

Bonjour Monsieur, La XN-08 a un moteur DIESEL mono-cylindre refroidi par air, la XN-12 aura un moteur trois cylindres YANMAR refroidi par eau. N'hésitez pas à nous contacter si vous avez besoin d'informations supplémentaires. [e-mail]

[@phar1970]

Elle à l'air sur tout beaucoup plus bruyante que la kubota ,par contre le prix de la kubota doit être bien plus cher que la Rhino ?

[@MiniPellesRHINOCEROS]

Le modèle XN-08 est effectivement plus bruyant que d'autres machines (Kubota, Yanmar...etc), à cause de son moteur mono-cylindre. Les autres modèles RHINOCEROS sont équipés d'un moteur 3 cylindres YANMAR, les rendants moins bruyants et plus proches des Mini Pelles d'autres marques.

[@scoyle1750]

two totally different machines but i would buy a rhinoceros

[@MiniPellesRHINOCEROS]

Obviously it is not the same machines, but they have different features and value for money !

[@jaycole5353]

@@MiniPellesRHINOCEROS what's the prices

[@MiniPellesRHINOCEROS]

@@jaycole5353 Prices are starting from 6 000€ to 17 000€ for a 2 tons model (new, with two years warranty). Feel free to contact us if you need more information at [e-mail]

[@TF856]

Yes the Chinese machine is a lot less money and a lot less machine! I have also heard they break down a lot, they only have one hydraulic pump, and you'll probably have trouble finding parts right away when you need them. They also don't have the boom swing. From what I've seen the tracks don't expand to the edge of the tail swing, they don't have pilot controls, they don't even have excavator controls. Someone said they only have a one cylinder Yanmar diesel engine. They said the small Chinese machine was about 6,000 US dollars. The cheapest one you can get from Japan is at least three times that much. But you get what you pay for. I'm going to go look up the specifications. I could use a good laugh right now. 😄 Update: I cannot find any information on them.

[@DieselRamcharger]

@@TF856 You are pretty much right on. The "yanmar" is a clone. most of these come with Changchai 192F {single cyl diesel} you can also get them with LCT gas engine. {usa legal}. they all have a single hydraulic pump. about the size youd see on a log splitter. the controls are live. not pilot. if you touch a stick, the things gonna move. period. You can get the boom swing option. it just costs extra. track speed is sslllloooooowwwwww. most come right out the box with weeping seals and hydraulics. but you know. is it better than a 25 year old japanese machine with 6000 hours for twice the price? thats the question. which is the bigger pile of shit.

[@erichoesein6749]

I need one

[@MiniPellesRHINOCEROS]

Hello Eric, Feel free to contact us at [e-mail] if you need information about those models. It will be a pleasure to answer you ! You can also send us a message through our website. Faithfully,

[@marcelapplencourt387]

La xn08 est elle fiable on me la propose à 4500€ chez darron machines ect ce u'e entreprise fiable

[@MiniPellesRHINOCEROS]

Bonjour Monsieur, Nous vous déconseillons vivement de verser un acompte avant d’avoir vu une de leur machine. En effet, les photos du site de darron machines proviennent de multiples revendeurs mais pas d’eux, et leur page Facebook et site internet ont été créés il y a 10 jours… Nous restons à votre disposition si vous souhaitez échanger et vous conseillons de vous méfier des revendeurs ne permettant pas de visites dans leur entrepôt.

[@satishminde5983]

Price

[@MiniPellesRHINOCEROS]

The price of the smallest model: XN-08 is at 6 000€ (Excluding VAT). Don't hesitate to contact us on [e-mail] if you need further information.

[@dfk8881]

@@MiniPellesRHINOCEROS I love the Kubota K008, but it costs US$25,000 here in the US. The XN08 costs about US$7500, including tariffs, customs, sales tax, shipping. Also here in the US. I bought mine 2y ago in California, and it works great.

[@pastorkeri]

dfk8881 it won’t last

[@dudufregoso]

@@dfk8881 I found your write up about your first XN08 on the tractor forum. I can't thank you enough for that! Because of you I decided to jump ahead and buy me my own micro excavator directly from china! Thanks!!

[@relaxationmovie2057]

aucun déport de bras c'est vraiment dommage

[@MiniPellesRHINOCEROS]

Bonjour Monsieur, Nous vous remercions pour votre commentaire. Nous avons récemment élargi notre gamme et proposons maintenant les modèles XN-08 et XN-12 avec déport de bras ! N'hésitez pas à nous contacter afin d'avoir plus d'informations. Bien Cordialement,

[@relaxationmovie2057]

@@MiniPellesRHINOCEROS merci je vais regardé

[@turtlezed]

ITS IN FRENCH WITH AN ENGLISH TITLE...WTF

[@MiniPellesRHINOCEROS]

Hello Sir, the video is in French but has been translated in English, as well as our website, this is why you have an English title. You can thus find English subtitles at the bottom of the video.

[@sandriniazation]

you find a reason to learn french...

[@dudufregoso]

Qué?

[@jgk2061]

ses pas possible des machine comme sa ... faut arrêter de vendre ses machine chinois la !! faut laisser les japonais vendre leur minipelle dans ce domaine ses les meilleur ! (kobota,takeuchi,yanmar)

[@cedixo6589]

Rhinoceros quelle chinoiserie toute pourrie. Les japonaises sont tellement meilleurs, kubota restera leader dans le domaine👍👍. Il vaut mieux acheter une occasion qu'une merde pareil (je parle de la xn08)

[@cyrilmistercc9442]

Y a pas d occasion ou au 3/4 du prix du neuf a 3000 heures

[@TF856]

Japanese machine is better than the Chinese machine any day.

[@MiniPellesRHINOCEROS]

Hello Kerry, Well it definitely depends on the work you have to do... Japanese are not build for the same purpose and obviously don't have the same selling price.