Comparison of three Snow Foam Lances. FJ10 vs Cheap one vs Pro-Kleen with Karcher K4

[@kevinbeacham6210]

I got the same problem . With k4 full . I upped the mixture . But I also bought the 25ltr drum humac snow foam and now use 400ml with it ,gives nice foam and for only 40p that isn’t bad

[@jdmscena]

Change the orifice inside the foam lance. Your china and pro kleen foam lances have original 1.25 mm orifice inside. Your k4 kärcher has 110 bar so you must change to 1.1 mm orifice, to build more pressure and then you get thicker foam.

[@jinxsior]

Hi Marko. Thanks for advice but I did this. kzbin.info/www/bejne/l3zXaKSoe5J8hpI

[@chriswatson19898]

Actually the Karcher K4 is 130bar

[@fatboydave8643]

using too much water with the karcher

[@krzysztofmarciniak1471]

A próbowałeś taką ręczną pianownicą kiedyś?

[@jinxsior]

Krzysztof Marciniak Nie próbowałem ręcznej. Znalazłem juz przyczynę braku efektownej piany. Prawdopodobne twarda woda plus temperatura na zewnątrz i ceramika na samochodzie powodują zmienione parametry płynu. Należy zwiększyć stosunek detergentu i mamy pianę jak należy.

[@robw89]

Czy czasem piany nie daje się na suchy lakier? Jak moczysz lakier przed piana to zawsze będzie splywalo.

[@harryharry7129]

Hello Jaroslaw, did you find a solution? If not, please watch this video on how to get the thick snow foam you want. The Pro-Kleen liquid is very good. The problem is the orifice inside the lance. You need to change the orifice inside to a 1.1mm orifice. This can be purchased from China for less than £4. On eBay it is much more about £12 but still from China. You can find it on AliExpress. Here is the video kzbin.info/www/bejne/nH-tfKSoYs-MaNU

[@jinxsior]

Thanks, I ordered it from China and i'm waiting for delivery.

[@harryharry7129]

Jaroslaw Tylutka I hope you can make a video when you receive it!