Complete building design in 25 minutes by ETABS Software | Civil engineering | G+2 design by etabs |

[@kunalvishwakarma8848]

You r genius

[@civilengineeringbyshravan9596]

Thank you

[@1971kitcha]

Is the depth of beam given section property including slab thickness?

[@civilengineeringbyshravan9596]

Yes including slab thickness

[@hirazera3362]

If we have existing building how to check using aut cad drawing we want remove some part of slab punching

[@nicolasmarie4398]

Thanks for the video and explanation. Great to get so much information from A-Z in one single video of 25 min. In my project the panels are different from one another and there are gridlines which pass through some of the panels and clicking inside a panel containing a gridline or two inside will create 2 to 3 slab instead of one with quick floor creation. I want to know if this will not create any problem or I should click the gridpoint to make sure that each slab rest on the corner column and each panel is 1 panel in reality and not 2 or 3. Also my beam is 425x200 where the 425 is the depth and the top part of the beam is the slab thickness of 125. So the beam is actually 300 + 125. Should I design the beam as 425x125 or 300x125? Thanks.

[@civilengineeringbyshravan9596]

Welcome

[@november3056]

rebars not showing for beams and columns in csidetails?

[@er.koushikdas2150]

Hmm

[@dinendrapaonam7440]

Mine too

[@sriharsha_10]

🙂Waiting for video on Design of buildings using Matlab

[@Kutty8562]

Thankyou

[@civilengineeringbyshravan9596]

You’re welcome 😊

[@ook3991]

@@civilengineeringbyshravan9596 edit edits design strips not edit selected &how to provide load bearing wall in etab

[@mkwrites280]

sir from where to install the plugin inetab of csi detailing

[@ronnie9096]

Why design strips is provided at ground floor? Is it because you are considering 1st floor as ground floor. In story definition you've consider 4 story. Bottom as foundation level, then plinth level, then ground floor level, then 1st and 2nd floor. Typical height is 3m. So your plinth level is at 3m and ground floor level is at 6m above ground level.

[@rcbsht9644]

perfect

[@ayutshisode7835]

Sir is there any shortcut for the strips ? If i want to design G+20?? Please help me sir

[@kulshriwagh8245]

Can you plz make video on designing the wind turbine foundation in staadpro .

[@karthikchinniah6739]

THANK YOU SIR.CSI DETAILS SOFTWARE IS NECESSARY OR NOT SIR ...WHY WE CAN'T TAKE PRINTOUT IN E TAB ITSELF

[@jayprakashbarik9849]

Sir what is features of laptop to install all these software

[@er.rajatkumarsingh5611]

Sir Mene sem project kiya apka but mera beam strips & column tais spaceing are showing 275mm

[@atulverma6795]

i m using etab 20.2.0 in this i m not able to desing slab strips in edit option and the option is not working, will you let me why is this happening, sir

[@Miltonsankiss]

unluck the model by clicking the lock symbol right under the draw menu

[@aryanengineeringacademy9884]

I need a complete building seismic design which considering the effects of wind and earthquake in at least G+12 story Rc Building According to American codes

[@amitsah726]

sir, I watched complete video but I didn't understand analysis ,design and detailing part ....what is what

[@prakashmanjula4385]

How to submit the drawing client

[@Allinone-hf5uu]

What is diaphragm ??

[@prasadpatil7300]

sir you not shown the foundation part in it

[@mathivanan9996]

Etabs crack give correct design or not please explain in ur video

[@mohdrehan2793]

Sale hindi bol