Рет қаралды 83
#SpaghettiMachine #MacaroniMachines #foodmachinery #pastaextruder
ainuokmachine.com
Email: june@ainuok.com
WhatsApp: +8618603721237
api.whatsapp.c...
Today I would like to share and demonstrate with you:
2023 How to correctly use the single-screw extruder to produce macaroni and pasta operation methods and workflow.
1. Install the grinding tool.
A set of pasta extruders has 10 molds, and each mold should be installed flat
2. After the temperature of the main engine rises to the set value, start the main motor.
Add no less than 500ml of water at the feed port for easy discharge. At the same time,
start the feeding motor and adjust the feeding and unloading speed.
If the material is discharged normally, the speed of the main motor will be gradually increased to above 800 rpm (40Hz).
The required feeding amount is based on the principle that it can meet the needs of the main machine: no material can be accumulated, and no material can be empty.
After feeding, pay attention to the indication of the ammeter of the main motor at all times, and generally, control it at 25-30A.
3. After the material is extruded from the die head normally (no foreign matter, puffing is good), start the rotary cutting motor, and then close the rotary cutting machine cover. Adjust the motor speed until the desired length and shape are cut.
👇👇👇👇👇👇👇👇
subscription Now:
/ @ainuokmachine
About Us:
Anyang Ainuok Machinery Equipment Co., Ltd.
Website: ainuokmachine.com
Email: june@ainuok.com
WhatsApp/WeChat: +8618603721237
api.whatsapp.c...
🍀🍀🍀🍀🍀🍀
Learn More:
linkedin: / ainuokgroup
facebook: / ainuokgroup
pinterest: / ainuokgroup
twitter: / ainuokgroup