Plastic Injection Molding

Bill details the key engineering principles underlying plastic injection molding. He describes its history and, then, reveals the intricate details of the process. He shows viewers where to found, on any injection-molding product, the markings created by injection molding. He closes with a description of the one of the finest examples of the injection molding: the Lego brick.
Overview video: • Video
Mold manufacture: • How It's Made Plastic ...
Plastic bottle cap production: • Injection moulding of ...
Making Lego bricks: • LEGO...The Building Bl...
99 Percent Invisible: 99percentinvisible.org/episode...

[@ernestmoney7252]

Nothing better after a day's work than to have dinner, pour a glass of wine and watch a video about plastic injection molding.

[@DavidSoto90]

classic!

[@NuisanceMan]

Use a plastic glass.

[@responplasticindustrialco.5218]

Great introduction. That is just what we do. We produce plastic injection molds and then do mass production using the molds. Very small quantity like thousands or hundreds is accepted. www.rpimoulding.com [e-mail] This is Vicky from Xiamen, China.

[@s.guttmann6625]

@@responplasticindustrialco.5218 Vicky, is there a video somewhere how the radio shells (cabinets), small and large, are made using injection molds

[@arnasgribas112]

unless you work in that industry... then you search mistakes and ideas...

[@gustavoturm]

This guy is the David Attenborough of engineering!

[@noladyer8322]

I love David Attenborough!

[@JamboRiffs]

I literally just thought of that too, good spot

[@LuisCasstle]

The same vibe I got from this video. Binge watching his playlist 😂

[@ralphspradley7988]

Perfect Analogy

[@extra6839]

i was thinking the same thing

[@BusyBasaz]

What separates us from other animals? Plastic injection molding.

[@ScienceDiscoverer]

Animals and humans are made of plastic themselves! We are synthesizing tones of plastic inside our bodies.

[@demef758]

Yeah, if Orcas and dolphins are so damned smart, why aren't they pushing out seal meat in their own injection molded factories?!

[@JamesJones-ft6bv]

Mass murder and cruelty

[@pepsiman1488]

I bet your real fun at parties

[@newlifeinireland]

Human beings are the only animal that eats Tabasco.

[@arrian5088]

After spending 200 years making injection plastic I can say for sure this guy knows what he's talking about!

[@AMKpolka5]

You are my hero in this comment section

[@DJ_POOP_IT_OUT_FEAT_LIL_WiiWii]

inject me baby

[@johnlau8461]

just 200?

[@guyellwood7759]

Thank u sir for your long service

[@herculesrockefeller8969]

Wow, you're old.

[@jackfrost2146]

I made plastic injection molds for 35 years, and that was the most precise description of the process that I could wish for. Great work!

[@austinh7967]

sick

[@derekzhu182]

@@austinh7967 @Jack Frost that means “cool” in boomer terms

[@rippen1982]

@@derekzhu182 you're a dumb ass.. That means dumb ass in your case.. 😂

[@sophiazhang3600]

Hi Jack, glad to contact you here. This is Sophia from China, we do the same field abt injection molding, may I know your email? My email is [e-mail]

[@hulksmash8159]

@@sophiazhang3600 Hi Sophia. Hope you are well.

[@foadrightnow5725]

This guy is THE epitome educator! Clear, concise, and informative! Always a pleasure to watch his videos!

[@mtdewchallenger]

Let us not forget … an engaging delivery !!

[@samfungcheung345]

@@mtdewchallenger kerry logistics

[@scottsmith7969]

I’m a maintenance mechanic at a plastic injection molding plant. I rebuild and maintain these machines. If someone asked to explain the principles involved I don’t think I would have done it as well. Our molds don’t have hot runners, or date stamps so I actually picked up some knowledge. Good video sir.

[@HANSENMold]

we specialize in mold design/fabrication, perhaps we can help.

[@samfungcheung345]

@@HANSENMold singh,

[@desmondnjah5974]

We learn every day

[@lukedhenig546]

As an industrial designer, I wish they would have taught this information in college as thoroughly as this video did in less than 10 minutes… would have saved me the trouble of piecing it together on my own bit by bit over a couple of years.

[@trepairs]

Hey, I was working on a product and needed help with the moulds. Is there anyway I could get in contact with you to ask you some questions?

[@brianhand9704]

After spending over 25 years as an injection mould toolmaker I thought I knew just about all there was to know. This is an excellent educational video that I have benefitted from watching and learnt much more than I expected. Many thanks for posting this.

[@samfungcheung345]

viet-cong,

[@trepairs]

Hey, I was working on a product and needed help with the moulds. Is there anyway I could get in contact with you to ask you some questions?

[@yoboialex]

First aluminium cans and now plastic molding, what's next KZbin?

[@lightning2940]

Micro oven

[@aaronseet2738]

Forging and injection molding techniques for wood.

[@mrkarma2868]

same ;D

[@dudepool7530]

Theres a good video about Nerf air restrictors.

[@idopshik]

Do you realize how great is it? Perfect content.

[@ronaldgreen5292]

I work in the Injection-mold department, assembling products. Love it!

[@mkviswanathan6271]

Where are you located , Donald? I am from India and would like to get some valuable business orders. Can you help me out??? Thanks Viswanathan

[@senkroadventures7318]

If you need help getting these plastic or metal parts made, this guy can help: www.linkedin.com/in/roopen-bundhoo/ Hope this helps

[@grainyanus]

Something about these videos is just so therapeutic and relaxing, yet so rich with information

[@LPMaxytb]

Absolutely agree with the Lego part. Our teachers often tell us how incrediblely complex and well-constructed the Lego parts are and what huge amount of engineering know-how went into making them. This year we even got the challenge to construct a mold for a Duplo part (A little bit easier but still great to build up knowledge as a student). On of our class even had to construct one for a Duplo slide. It took him and two teachers about 3 hours to find out how to construct the cavity in the mold in order to eject it from it.

[@AllForTheGame]

this is insane. valuable information is so cheap these days.

[@bismuthcrystal9658]

I love this comment. It's so true. In building my house, I did end up buying some books, but most were disappointing. I could've done it with only freely-shared knowledge. When thinking about the evils of social media echo chambers and tailored search results, it's important to remember how much good the internet brings us. How freely available information is. There are problems. Not all the information is factual, and not all is as available as it should be. We're still learning how to live with this amazing new tool. But the world has been made so much better. And the *unutterably* valuable ability to *learn* has been made so much more available.

[@GhotiCan]

Not sure I'd call this valuable information, lol

[@Lengsel7]

@@GhotiCan I'm not sure if you're particularly bright.

[@h.e.c.t.o.r.]

@@GhotiCan this certainly isn't a complet explanation on the subject, but it's great for getting people interested into it. Channels like this one may develop a love for science and engineering in little kids, such as it happened with me.

[@dumbcat]

Don't be too impressed. It's a sign of the End Times. "...seal the book until the time of the end. Many will roam to and fro, and knowledge will increase." Daniel 12-4

[@johnhower2559]

I designed injection molded parts for over 38 years. This video is on of the most thorough presentations of the molding process. This video with help new designers and engineers explain why it will take weeks to complete a mold due to strength of the pressures and the precision, and complexity of cooling the mold. Hats off!

[@samfungcheung345]

男: 你郁出面的人, 我当你黑吃黑, 不过, 要遵守香港法例,

[@alysemarie8313]

I never thought this subject would be so interesting yet here I am on the edge of my seat to learn how legos are injection molded…

[@Mr.Emil.]

Hey Bill. Thank you for returning to KZbin, I enjoy the way you explain things I normally don't think about. Have a fantastic day

[@engineerguyvideo]

+Mr. Emil I have never left KZbin: It just takes a long time to make videos.

[@lolonoazoro13]

+engineerguy get patron please!!!

[@kg4tnp]

+Morgan Brolin I agree, Take my money

[@uternpunkin]

+Morgan Brolin *patreon

[@Patraks]

+engineerguy You may want to consider signing up for a Patreon

[@deathpony698]

Please be my professor, instead of the lunatic I have now

[@ultimattttt1]

Ha ha. I'm intrigued about your professor now. If you want to off load then I'd be happy to hear it.

[@deathpony698]

Ultimattttt he was yelling at the guys using weed whackers outside, from the second floor. "HELLO? CANT YOU SEE WE HAVE CLASS IN HERE?"

[@ultimattttt1]

Ha ha. I GUESS this is just one example of how he lacks the ability to see things from another person's perspective, on both a physical and mental level. It is pretty essential to good teaching to have the ability to convey information in a way that people can learn from. If my take on it is correct, then you have my sympathy as it means that you will have to be more proactive. Apart from that, I know it's a long shot, an anonymous logical and carefully constructed letter/email may help. After all, you walk around with flaws that either no one tells you about or tell you in a way that you are not receptive to. Criticism in the right way is often the kindest gift that you can give someone. Look at people that go on talent shows like X Factor only to be ridiculed on an international scale because family or friends thought it kinder to not criticize. If you know your weaknesses then you can work with reality. Cheers for sharing.

[@isawadelapradera6490]

I don't know... a great engineer is always a bit of a lunatic.

[@deathpony698]

It doesn't matter how good of an engineer he is, if he can't teach it

[@laurencamila9024]

I'm a mechanical engineer and I just discovered your channel with this video, I had so much fun watching it, the description so accurate, and it seems the only thing left for me to do now is to binge the rest of your content

[@jbrunty1989]

As a process technician in Injection Stretch blow molding and Injection molding, this is such an informative and accurate video on our industry. Thank you.

[@AlqGo]

WOW...the dedication on the quality and details of this video is just amazing! You guys are true heroes to those who love to learn!

[@Fireflydl]

I'd just like to add that the water pumped round the tool isn't always cold. Where I work we regularly use water anywhere between 20*C and 80*C depending on the mould size and the material used for that job. We've even had moulds go up to 130*C for glass filled lens housings.

[@engineerguyvideo]

Thanks for sharing this .... interesting info.

[@hondarally300l8]

Been in Injection Molding since 1994, started as a operator and is now the Plant Manager. I always loved injection Molding,.

[@controllerthink]

Once upon a time, I was to be a U of I student. I chose a different path, and never found my way back to school to get a degree. I feel like if I would have had teachers like this, I would have stayed in school. Thank you for making these amazing videos. I appreciate your work because it shows how amazing even simple household objects are. Thanks again.

[@soaringvulture]

Well, yes. It's hard to find teachers as good as Bill. I had a couple of them and that was enough to let me have a career in engineering.

[@samfungcheung345]

@@soaringvulture 你們在工廠有实际工作經驗, 都是很珍貴的, 有些工程師实习生來到金属品制造业訓練中心, 問一些沒有工廠常識的問題, 你們至少不会这样問, 我会覺得他們奍尊処优, 对著塑胶机站半天也喊累, 要找一張椅子, 如果台海爆發战役, 你們这些略懂机械加工的工人, 就日形重要, 因為兵工廠要日以継夜生产枪枝彈藥, 供給前線的士兵,

[@jpaugh64]

As a kid, I studied the marks of injection molding on household objects without knowing how they were poured. Thanks for revealing the mystery.

[@jcoronet2000]

worked in a molding plant for 5 years, very good introduction.

[@ToWnHeAdAARON123]

What company?

[@frankmiller944]

This is one of the best videos I've watched describing injection molding. Great job simplifying the process so most can understand it and opening the door to the more intricate side of mold making and processing.

[@injectionmachineandsparepa5612]

great video

[@user-xq1ku5pp1y]

As a professional injection moulding productions sales in this field，i can surely say this is the most clearest video to the explanation of injection machine

[@swsephy]

I can watch you explain anything and be completely entertained and educated. Love your videos.

[@irixperson]

What a tragic response to a valid (and intelligent) observation. Ignorance strikes deep, I suppose.

[@mogur00]

Nic Parker - mate..... what in the mother of hell are you on about?

[@GabrielP]

Nic Parker - Who hurt you? Someone must have for you to have such a negative view of a positive thing.

[@eldenboi8354]

GabrielP For real though, hes butthurt beyond levels ive ever seen.

[@somequasiparticles]

Nic Parker hahaha what??? Out of NOWHERE 😂😂

[@Mak12368]

Your videos are always perfect.

[@Pipi108]

M.A.K I agree

[@smurfgurl8]

I am glad I stumbled upon this video BEFORE my chapter test on "Molds" in Solidworks. This video helped me understand and visualize the process soooo much better than it was ever explained to me in class! The lightbulb in my head has exploded and now I understand why I have to design with drafts and cavities on every single assignment. :-) Thank you!

[@leatherowoutdoors8852]

Man I've been in high speed plastics for 8 years. Specializing in closure and preform injection molding and PET blow molding. I was so excited to watch this. Couldn't wait to make a comment about hot runners, but then he brought them in!! Having toured multiple injection press and mold shops, this really hit a special note for me.

[@JDobsable]

How on earth does this guy make something as ordinary as plastic seem infinitely interesting? Thanks for the videos Bill!

[@okami-shaman9548]

because plastic is still new at least in the grand scheme of things.

[@davidpulkka5796]

Very nice. I am an injection molding process technician with 30 + years in the business. Your breakdown is a very informative approach to basic injection molding - great for the new guy/gal to gain an overall viewpoint of the process. Cudos to you for a clear and concise look into the process!

[@joel1hunna159]

Do you need a degree for this? Or do they train you at the site?

[@lawpickinglocksmith7689]

Thanks Bill for the explanation. In my apprenticeship we had injection molding machines, I used to feed the hopper. Back in the 70's the Italians were the "kings" of molders. We had a big tool shop that made so many molds.

[@giggleherz]

Interesting that Italians were the kings of moulders, maybe because they are such great craftsman. Also to see the lineage of machines (made in Italy) move forward to the ten ton press that Tesla bought to make huge cast aluminum parts.

[@samfungcheung345]

@@giggleherz 工联会两次声明, 在他們眼中, 广华医院是禽獸医院, 免費医疗是糖衣毒藥, 使貧苦病人对三合会感恩,

[@gracegennamia3118]

This is exactly what I needed. I was interested to learn more about how injection molding works, and this video could not have been more perfect! Thanks for this!

[@zikomo8913]

underrated and forgotten beauty of Mechanical Engineering.

[@matthewrichardson828]

This guy could take Mr Wizard and Bill Nye in a fight I bet.

[@etalon7648]

Its just perfect, this guy is going into such a detail in very limited time frame without making a single mistake. There is no room for improvement.

[@WINH4X]

“If you cut a lego in half.” Yeah, you’re gonna need the Hacksmith for that. Those things are unbreakable.

[@amrizalds9108]

what you mean of hacksmith?

[@WINH4X]

@@amrizalds9108 what

[@brantleydeady3125]

@@WINH4X Mooooo I am a cow

[@felixmerz6229]

8:06 "Look around you and see how many injection molded objects you can find." 'I'm pretty sure my laptop's case is injection molded.' 8:10 "Likely the device you are watching this on has injection molded parts" 'wow'

[@GeneraleRus]

I work in a factory that does injection molding of ABS, PS and rubber too, used for shoes manufacturing, mainly soles and heels The machines are indeed very simple despite looking overly complex! To think that we still have fully functional 1970s machines that work only on relay logic and nothing more, and nearby computerized machinery, doing exactly the same job, every day 24hrs a day

[@delta1525]

I only assemble parts after they have been molded, but I always found this whole process fascinating.

[@nicolasvatinelle988]

His voice , his tone, .... so relaxing and immersive. Bill, you are the greatest..

[@danielwatts7375]

I used to work at a CD/DVD manufacturing plant. This is exactly how we did it.

[@JustWasted3HoursHere]

I thought the reflection surfaces were stamped in those.

[@danielwatts7375]

@@JustWasted3HoursHere Actually, no. The data on the CD/DVD is injection molded onto a clear poly substrate. each disc is then placed into a chamber and undergo a process called "sputtering" which moves atoms from an aluminum block to the disc's surface, making the disc reflective. In the case of DVD9's (single side, dual layer) the bottom layer is sputtered with a translucent layer that allows the laser to basically "choose" which layer of data to read from. I'm 7 1/2 years removed from the process, so my memory isn't quite what it used to be.

[@Freakybananayo]

The diagrams and animations are the best I've seen when it comes to manufacturing processes.

[@Meg_A_Byte]

I've learnt all this in school about 8 years ago, but if I saw this video back then, I'd understand it much better and faster. I think there's a lot to be changed in the educational system.

[@orlandlamce]

Well done Professor, from one engineer to another, I say bravo. Your educational work is top notch, inspiring, and consistent with the rearing nature of someone who cares for his fellow man. Bravo!

[@bondwoman44]

I know everything I'm going to write is obvious but I just wanted to leave a comment in case you haven't heard these things lately. I hope you know how absolutely great your videos are! Your ability to take complex subjects and break them down for dummies like me shows your absolute mastery over not only the topics at hand but of teaching, video acoustics, filming, editing, animation, writing, and so many other things I'm sure go unnoticed. Your visuals are amazing; plainly drawn, distinctly labeled, and animated clearly. Thank you so much for what you do! Also, thanks for taking the time to add in links to videos/podcasts with more information on the subject!

[@richmelchr]

Love your animations. Thank you for putting so much thought and research into your videos.

[@SeanDoranirishman]

I've been in the business since 1994 and I agree, that was the most concise description I have ever heard or watched. Well done! Thank you!

[@chriseng5700]

Was a machine operator for a while. This video is so entertaining, and really educational. Makes me want to get back into the industry.

[@joshua43210]

Hey Bill, One of my favorite things about your videos are your super clear animation models. As a 3D modeler myself, do you model these pieces yourself? How do you do it? Thanks, and keep going!

[@jerrylong381]

Hi Bill, This is the first of your videos I've viewed. Very informative! I've been in the plastics business for about 20 yrs. and had no idea that's how injection molding started. I knew that celluloid was invented to replace Ivory, but not that this was the start of injection molding. I'm afraid you wouldn't find ejection pin marks on the product the Co. I work for produces. The parts are too thin, so are ejected by air. Think yogurt or butter containers. Other than that, you're spot on. Thank you from a new subscriber!

[@edercosta8884]

I am just starting at Plastic industry as a maintenance at Engel Global machines, this video helped me a lot in my first steps. Thank you Bill Hammack

[@elfarmy7898]

I wish you were a professor in my college because your explanation is simple,clear and to the point, just the way it should be explained. You helped me for my exam sir. Thank you!

[@DugGLe55FuR]

Lately I've been designing parts for plastic injection molding; at first I only knew the general idea but over time I've had to get more and more technical in my understanding. Even after reading a lot about the topic, this video has taught me more. There are some things I've learned recently that aren't specifically mentioned in this video: One is how to figure out which side is the core and which side is the cavity on a part. The core is the side of the mold with the ejector pins, and the cavity is the side with the injection gates. In practice, the ejector pins are never on the same side as the plastic is injected from. The core, which has the ejector pins, will be whatever side the mold engineer thinks the part is more likely to stick to when it shrinks during cooling. In practice this means that the core will be the side that has the most tooling enclosed by the part, or it will be the side that has the shallowest draft angle. I recently designed a part and was surprised that the vendor didn't want to put the ejector pins on the side that I was expecting, and then again I was surprised when the injection points couldn't be on the side I was expecting either. Another thing: the vendor used what are called submarine gates, which come in at 90 degrees to the pull direction and are designed to shear the sprue off of the part as the mold opens. Learning about this was fascinating.

[@samfungcheung345]

97 回歸之前, 周星馳申請移民加拿大, 加拿大移民局查到周星馳是演員, 長期和新义安中国星集团合作拍电映, 有身為三合会会員的嫌疑, 推翻了周星馳的移民申請, (英文南华早报, )

[@ivancampos2289]

Thank you a lot, engineerguy. I've got a homework about this great process and I didn't found better information than this video. You helped me to know an excellent info and valorate the extrusion process.

[@GuardianAngel1032]

I love that this is as informative and thorough as it is. I didn't expect him to cover hit runners in such a short video. He did miss the fact that celluloid is flammable and volatile, though.

[@richardb1791]

I'm a mechanical engineer and I've designed many injection molded consumer products for over 40 years that are very well known to everyone. I just want to say that this presentation is marvelous. Keep up the good work.

[@MaruHieta]

This was way more enthralling than I thought.

[@BryantMitchell]

It's like listening to a story. Great job!

[@new_comment]

I used to operate a heavy mold machine at PMI when I was 18. I was so amazed at that simple process and all the parts we made.

[@gurz1987]

Just recently discovered this channel and I am already completely hooked! The soothing voice, the clear explanations, no "sponsor shout outs", no "hit the subscribe" demands. Just pure knowledge and information! Great job!

[@marcusborderlands6177]

He doesn't have those things in his videos due to them not being his main source of income, that's not an option for a lot of content creators

[@Earlzo2325]

never thought I'd watch this on a Sunday night... and enjoy it. Thank you.

[@americansmark]

Congrats Bill on earning the Carl Sagan Award. You deserve it. Your videos are the Cosmos of engineering.

[@johnrobinson4445]

He gets right down to it. No introduction except what is necessary for the topic at hand. Then on to the details. Wonderful.

[@raylast3873]

I used to work in a factory that made its own injection molded parts for precision pumps. Modern injection molding is very fast, I think some of the cycles were just a few seconds. Still, the assembly machines were faster and so we were always behind on parts and were buying a ton of them from vendors as well.

[@NickDanzinger]

Clear, concise, and full of amazing details!

[@Rollercoasterbox]

I enjoy the way you explain things as well. The 3d animation of how the parts work is amazing. Thank you for taking the time to make these videos.

[@cochinito1]

This is amazing. In ten minutes he explained what took 2 classes of Design of plastic products, and way clearer.

[@justinmanser7525]

My father designed moulds and manufactured them. He also had a production line with numerous machines, British built (Newbury) and had the distinction of being able to convert imperial measures to metric and vice versa in his head. This was because we moved to the U.S. in the 1980's. Thanks for the video, it's a great reference to a life I lived long ago.

[@RealBenAnderson]

SO WHO WON THE BILLIARD BALL CONTEST?!

[@almo9004]

No winner was officially announced.

[@philipanderson7581]

@@almo9004 WHAT ARE THEY MADE OF NOW?

[@Losttoanyreason]

Well since Nitro cellulose is gun cotton , the balls had a habit of exploding, LOLOL. They switched to Bakelite which was not explosive as soon as it was available.

[@capuccinolight]

WHO’S NEXT??

[@philipanderson7581]

YOU DECIDE! !

[@CorvusMiniatures]

I'm in the plastic model kit building hobby, and I'm very used to speak about "sprues" to which the parts are attached. Today I learned they are actually called runners :)

[@ToastyMozart]

The terminology seems to vary a little by branch in the hobby, Gunpla circles tend to refer to the entire sheet (runners, gates, parts, and sprues) as Runners.

[@yeonsoohong2017]

Thank you very much for your video sir! I currently work as a procurement guy for a company selling electronic products and this video really helps me a lot know the fundamentals of the injection molding especially in this Covid hard times. Thank You!

[@MSC009]

That's a wonderful explanation and visualization. Every person working in plastic industry should watch this. We did not have such videos back in my time. This is so valuable.

[@Bigelowbrook]

great explanation! It would be a good companion series to discuss roto-molding, vacuum forming, and blow molding. ;-)

[@mgrantom]

Wow, this is my new favorite channel! I wish this would have been around when I was a young man, just interested in all things mechanical and electrical. What a great resource. Thanks for sharing your knowledge.

[@senkroadventures7318]

If you need help getting these plastic or metal parts made, this guy can help: www.linkedin.com/in/roopen-bundhoo/ Hope this helps

[@harrisionstan3773]

Thanks Bill, as keen model builder I'm always interested to learn how they're made.

[@cptrikester2671]

Great video. Many many years ago, I use to be a shop lead that was responsible for making sure 4 to 5 injection molding machines were producing products. This included material and mold changes, heater / chiller set ups. We had molds that also had screw elements that had to unscrew before ejecting the parts. The inside edges were razor sharp, and I have scars from removing stuck parts. If you use a phone that was made in Alberta in the early 80s, chances are, I was involved. Ever since, when I look at plastic parts, I try to understand how they are molded. The most complicated parts that I see now a days are printer frames with multiple sliding inserts and cavities. Extreme precision molds are required.

[@marhar2]

One thing I love about this channel is the number of really smart commenters that can provide various answers to the questions!

[@slavkostojanovic3924]

Very good explained, just one correction regarding "Lego Molds". Actually those were standard Hot Runner molds but no more in use in Lego. They are now returned to improved sprue tecnology in energy saving manners. Improved sprue means that it is basicly a "Stack" Mold meaning that during opening midle plate is also detached and robot removes the sprue with comlete gates.

[@g_gaming2893]

This video is very well done, I have worked in an injection molding company for quite some time as a mold tech meaning I have to know a lot about the process. And he even taught me a good bit. Perfect.

[@jamiegaudet6008]

No one has made a better video explaining this in the last 7 years, thank you for this explanation!

[@jovanhardy1591]

can't believe I watched this whole thing and enjoyed it

[@detaildr]

I never thought injection molding would be so interesting!

[@nidhoggvomwalde2280]

I did know the technical solution, but this explaining is on a lvl that even people never have been in contact with it can understand it easily. Great.

[@donalfinn4205]

Top class tutorial as usual. No padding, no filling, no annoying music. Just straight in to the subject which is always made interesting. The way all KZbin videos should be. Thank you.

[@Mike-mc3ty]

No filling? Do you mean N O I N J E C T I O N P L A S T I C M O L D I N G

[@donalfinn4205]

Mike No no no. Video is fine. I love them. What I was saying is that there is no unnecessary padding or filling out to make the video last longer.👍☘️

[@sidskysingh]

wow, so throughly explained !! Even with the history, I'm ready for a test paper !

[@deltabeta5527]

I was just wondering about injection molding two days ago and KZbin recommended me this video. That means KZbin can read my mind!!!

[@abdelfetthmoslih4175]

Je suie intéressé pour seci je veux uneinjecte manuelle porur cela

[@mgoh1984]

I was driving home one day last week was thinking about how my neighbor's mailbox post is short like her, and then looked at mine and wondered how much longer it would last. Next day I see an add for mailbox posts while flipping through the stories on my home page. It would be different if I talked about it because I know how that works, but just thinking about it?!

[@ronaldgreen5292]

Beyond awesome, educational, intuitive learning video! Like my own mechanical, gearhead, brain, I can mentally see how things work. I've always loved step,by, step instruction books, and videos on how things work. Thank you!👍😀

[@henrikwannheden7114]

What didn't occur to me but recently is that the 3D design most allow for the object to be pushed out of the mold. There can't be overlapping structures that would obstruct the line of draw.

[@tonyha3827]

He did a great job explaining this. He is a teacher, no doubt. We need a society of inquisitive minds to share our knowledge. Maybe I don't know of cyber cities that already exist. Not political, egotistical but ways to learn and connect with others who enjoys the learning part of life

[@rljzathras]

I always remember the pair of boots I had that had the date stamp from the mold embedded in the sole. I wonder how many boots went out without a date stamp and a huge protrusion instead! The lump of metal from the mold with the numbers was about 10mm long and about 8mm diameter!

[@blondiewan3331]

Wow, that's one heck of an amazing factory goof! Do you have a picture of that boot online somewhere?

[@dakotazimmerman1228]

Did you cut the stamp out? I'm confused how you saw the dates because that part would have been embedded in the sole, you would only see the back side of the stamp.

[@1768ify]

I suspect that it fell off after a step or two.

[@PhilJonesIII]

Good excuse if you made some stupid promise to eat your boots: Aw, look, its past its best-by date.

[@Istandby666]

In the 90's, a friend of ours owned a injection molding company. He made airplane windows and windshields. In the late 90's he helped a gaming company to bring 3D gaming to the public. In the early 90's, Government contract companies out at Edwards Air Force Base looked at injection molding of aircraft parts. You lay the special fabric down and inject the resin and bake it. This allows the aircraft to be more stealthy.

[@zamboni12]

Idk what it is but the way this guy talks it gets me so engaged as if I’m listening to a narrator that’s describing an intense action scene. He talks at a steady and confident pace, but then very subtly he picks it up when he’s talking about stuff like the mold being injected with molten plastic. Idk lol it’s dope

[@onatgz]

this may be the best youtube channel.

[@Matticitt]

Once again - awesome video!

[@adventure9119]

As an industrial designer in college (someone who’s probably going to be making A LOT of plastic products) thank you for making such a comprehensive and understanding video :D

[@Fr8train003]

Got my degree in plastics engineering at UMass Lowell last year. You will be successful as long as you follow the rules for “design for injection molding.” There are many, and I would implore you to learn about the various scenarios which call for the respective design features.

[@darinwang3115]

Now I am engaged in the business of plastic injection molding. I am very grateful that this video has let me know this great industry. I am looking forward to cooperating with more mold projects