Complete Guide to Setup RC Simulator for FLYSKY FS-i6X | Free Simulator 2024

[@ougri7966]

thanks

[@AKElectroDIY]

Welcome

[@Humayun-Najabat]

😮😮😮

Hey, I'm having a weird issue with my SWA and SWB switches in Picasim and other Sims. When I activate them, they both trigger two buttons at the same time. SWC, SWD, and the other switches aren't working at all, which is strange because they used to work fine. Any idea what could be causing this?

[@AKElectroDIY]

Kindly go to Control Panel > Devices and Printers Right click the Flysky Device and click something like "joystick configuration". There, you can see the output of all the axes and switches. Kindly confirm that they are working good there or not. Then you can tell me.

Behavior is the same. When switch SWA is off button 1 activated. When SWA is on, button 2 activated. Same for other switches. No reaction for knobs. Verry strange as I remember it used to work as I had flaps mapped to knobs before...

[@AKElectroDIY]

Ok. What is it showing on the screen of the transmitter.

@AKElectroDIY Nothing Special. Normal screen. All setup as default. All switches assigned in aux settings. Mixes are off. In real receiver it works fine.

[@thehazzaz4181]

thank you bro

[@AKElectroDIY]

Welcome

[@alecrider5077]

could you upload a link to download the drivers manually please? i made my own cable and the drivers don't auto install. thanks!

[@AKElectroDIY]

You can search online for the drivers, as I don't have the link. Mine just installed automatically

[@MUHAMMADSAIFULLAH-m4k]

Sir jo ap na aroplane banaya ha tranier ais ki cg 5.2cm per karni ha ya 4.2cm per

[@AKElectroDIY]

4.6 se 5.2 cm hai. Matlab in dono points ko wing par mark kar ke, plane to dono lines ke center pe balance karein.

[@Sibi-e4x]

It support ct 6b transmitter?

[@AKElectroDIY]

Yes, this is a basic tutorial for all transmitters

[@jeronimodiaz-w6q]

Hola, siguiendo sus pasos me funcionó, pero tengo un problema, cuando muevo la palanca izquierda del conteo también se me mueve la derecha y me afecta el vuelo no he sido capaz q me funcionen totalmente independientes. Si me pueee ayudar con la info le agradezco.

[@AKElectroDIY]

Make sure that your transmitter is set to default settings. There might be any mixing between the channels in the transmitter setting.

[@acertech1550]

Hi, Please which cable you use to connect?

[@AKElectroDIY]

It is PS/2 to USB cable

[@Sibi-e4x]

@@AKElectroDIY Cable that came with transmitter can be used?

[@AKElectroDIY]

@@Sibi-e4x Yes that's the same cable that comes with transmitter. It serves two purposes, firmware updates and simulators. By the way I also played other games like war thunder with this transmitter. It just works like a joystick that can be used to play games

[@Elisrc.]

Why didnt you tell You had a channel? Its awsome

[@AKElectroDIY]

I thought that you knew 😅

[@Elisrc.]

@@AKElectroDIY i didnt😆

[@AKElectroDIY]

@@Elisrc. I comment on your yt channel but I think yt removes those comments

[@Elisrc.]

@@AKElectroDIY Oh i see ,well Hope everythings ok now

[@AKElectroDIY]

@@Elisrc. Yes. By the way, I am really inspired by your builds and I want to build some of them too. Can you share pictures of the plans with all the measurements? Just upload that picture on google drive and share the link in your video description. It will be really helpful.

[@kavin6522]

Bro my windows 11 pc is not reading it, what to do?

[@AKElectroDIY]

@@kavin6522 Try searching for drivers. By default, win11 should recognize it and install drivers automatically. And it takes approximately 5 to 10 minutes to read the device for the 1st time.

[@kavin6522]

The cable and transmitter isn't recognised by the laptop, and I tried to download drivers but they aren't compatible.

[@AKElectroDIY]

The cable might be faulty then?

[@AKElectroDIY]

Try connecting to another laptop or pc, like your friend's or any other.

[@kavin6522]

@@AKElectroDIY sure, thank you

[@654comet]

Eventually i am facing problem of FSI6 joy sticks response while using simulator , i have to re do the settings , what is the reason can you please help

[@AKElectroDIY]

Hmm that seems a bit strange. You can try updating firmware of your flysky. Video is on my channel. Hope it can work.

[@654comet]

@@AKElectroDIY Ohh thanks for your prompt response , or is it the picasim or smart pro plus software issue ?

[@AKElectroDIY]

The picasim software works fine with my transmitter. So I don't think its a software issue. Well, you can reinstall the software and check if its gixed or not

[@fs25ricc90umbria]

ciao funziona con il trasmettitore fs i8?

[@AKElectroDIY]

Yes the simulator installation and setup process is the same for all transmitters

[@fs25ricc90umbria]

@@AKElectroDIY hai il link del dowload del simulatore?

[@AKElectroDIY]

www.rowlhouse.co.uk/PicaSim/

[@lucifergaming3602]

Can i do this in flysky ct6b

[@AKElectroDIY]

Yes you can try. Most probably it should work. This will work for all transmitters in general.