Gonna pin this here for anything I might have missed out or any errors I might have made: -A LOT of people pointed out that the music was too loud, so I've just re-uploaded a fixed version, here kzbin.info/www/bejne/qnbMeY2Il6dsldk :) -Apparently, they revamped the TBS Crossfire Manual just last 2020/03/24 and is MUCH more detailed now. Do check it out.
@andrenalinfpv80874 жыл бұрын
I remember figuring out the problem with your QX7 mod about a year ago now. Was very glad to help you out then! This will surely help future CRSF users.
@ImaginationTech4 жыл бұрын
Yes, you most certainly did! You should check out the appendix video. Your name is plastered on there at 6:09 :)
@kandredfpv4 жыл бұрын
Nice work on putting this guide together. As a first time TBS crossfire user I found it complete and helpful. Cheers, and subbed.
@ImaginationTech4 жыл бұрын
Thanks man! Pretty soon this guide will be obsolete so I'll need to redo it. Maybe early next year ;)
@goballistik13 жыл бұрын
Brother, Thank You so much for your information....and for being an EMU-Flight Co-pilot. Your videos are helping me relearn the new stuff I am finally deciding to buy. I had watched a few of these type crsf mod vids in the past and I just didn't make the leap to actually getting it until now. Your take on how to present the entire process was very well laid out. I would like to make one small suggestion. The music in your video is great, however, if you could lower the volume of it just a bit that would be perfect. Thanks again. SEE YOU IN THE SKY!
@ImaginationTech3 жыл бұрын
Oh, I am very much a noob when it comes to EmuFlight! But I'm trying 3.x soon, just flashed it (still had Butterflight/EmuFlight 2.x on my boards). Really appreciate the critique and suggestion. For the audio, learned my lesson. There's a link to a version of this video that doesn't blow your ears with the music, it's in the description/pinned comment :)
@robertjackson76953 жыл бұрын
New to the menu ..you were clicking so fast i couldnt keep up !!! But this realllllllyyyyyyy helped thanks for all that effort and filming !!!!
@ImaginationTech3 жыл бұрын
Sorry about that, if you have questions ask away. And if you feel the music is too loud i have another version linked int he description.
@thefatmoop4 жыл бұрын
don't power up a radio transmitter with the antenna disconnected
@ImaginationTech4 жыл бұрын
You'll get terrible range, but other than it's not recommended, I've done it several times and it's not gonna burn up your module. I think it's robust enough to handle it, unlike most VTXs.
@FlyerTuck3 жыл бұрын
Yeah man, I noticed that also. TBS stuff is pretty robust stuff though. But still, as a rule-a-thumb...Spot on Bro!
@flo-ridafpv57134 жыл бұрын
Good shit bro, subbed...makin the jump from R9... dumpin frsky like i dumped fatshark n analog lol
@ImaginationTech4 жыл бұрын
You won't regret making the jump! :D
@ebmxrides14232 жыл бұрын
What’s the LBT and NON LBT mean when I’m buying it?
@ImaginationTech2 жыл бұрын
That's just for the region I think, LBT is for when you're flying in Europe.
@trevorimpulsebuyguy63984 жыл бұрын
Great video, the music playing over the whole video was killing me
@ImaginationTech4 жыл бұрын
Yup, that's why the description and pinned comment had a link to an alternate version where the music won't kill your ears.
@trevorimpulsebuyguy63984 жыл бұрын
@@ImaginationTech Thanks
@lbaltha6663 жыл бұрын
Interesting thanks. Just find that music is too loud and doesn't really bring anything...
@ImaginationTech3 жыл бұрын
Yup, countless people have pointed that out. In case you missed it, there's a link to a version where this is fixed in both the first line of the description and also the pinned comment.
@lbaltha6663 жыл бұрын
@@ImaginationTech oh. Sorry. I didn't see that link :). I didn't mean to criticize your work. Just gave some feedback ;) Thanks for sharing knowledge ,🙏
@NorthStarDrones2 жыл бұрын
Great video subscribed 💯👍👌
@ImaginationTech2 жыл бұрын
Awesome! Really appreciate it 😎
@413RC3 жыл бұрын
how come my pages are different than yours?
@ImaginationTech3 жыл бұрын
What firmware do you have on your radio? That would probably be the reason. If the pages are different, but you can still access the relevant pages, then it shouldn't be a problem.
@Chris-vc1dh Жыл бұрын
What is the practical difference between lite and Bluetooth full module ?
@ImaginationTech Жыл бұрын
I don't think there is much difference aside from the bluetooth.
@craigmunday37074 жыл бұрын
Does the micro TX v2 support streaming telemetry to a mobile or tablet?
@ImaginationTech4 жыл бұрын
I don't have a TX v2 yet, the one on this video is a v1. But yeah, I heard the v2 can do MavLink now.
@minjunkevink4 жыл бұрын
Can you still use the normal transmission with other drones with the crossfire soldered? How does it work?
@ImaginationTech4 жыл бұрын
Yes, the internal module is completely unaffected. The mod is for the external module bay where you would put the crossfire.
@sleepingbearffg50084 жыл бұрын
I'm safe real safe. Dont know one person who died. 3 that got it. Got better at work. But I'm shure someone knows someone who knows a kid who's mom died in two hours from. I wish no one had to die. But it happens. The life god gave me. He will take weather inside for a year or not. I'm enjoy the life gave me.. God bless great review. Be out flying when you care to join..👊👊💪💪
@ImaginationTech4 жыл бұрын
I think this whole thing just showed people how unpredictable, and short, life is. I agree, God can take your life away any moment. This hits close to home as 2 of my friends' moms have died within a week of each other. A high school friend thankfully survived after a week being intubated.
@egtreadway42323 жыл бұрын
I was ready to give up on my crossfire micro tx v2 until I come across this video Thanks, so I've been days trying to connect my crossfire system to mission planner app but still no go it just won't connect. Micro tx v2 firmware is 4.0.2, nano rx firmware is 1.17, nano is wired to f405-wing I have only 4 wires connected 5v, ground, nano channel 1 to rx1, channel 2 tx2 I have channels mapped according to wiring. Everything binds no problem all telemetry coming back to radiomaster tx16s, laptop, and tx wifi module seems to be connected to phone hotspot but app still will not connect. Do I need to wire nano to another uart to make this work? I have open tickets on crossfire website but for days tickets say processing, crossfire support very disappointing. Any help will be appreciated
@ImaginationTech3 жыл бұрын
Hey man, sorry I haven't seem to have replied to you. Have you gotten it working. I haven't tried Mavlink, but I can do some research.
@egtreadway42323 жыл бұрын
No it's not working I've tried everything I can think of, any help would be appreciated
@angelfpv48254 жыл бұрын
sir question yung tx ko kasi walang usb port nasira ko. pwede ko ba gamitin usb port ni crsf module as usb port para updated yung tx?
@ImaginationTech4 жыл бұрын
Unfortunately, it doesn't work. It's not a passthrough unlike with ESCs connected to a flight controller.
@kymmedia22 жыл бұрын
what will happend if i dont install the little chip on my qx7 if i just want it to fly a mini woop
@ImaginationTech2 жыл бұрын
If you're using a whoop, chances are you're not even using crossfire but the built-in frsky receiver, so this doesn't apply to you. If you do have a crossfire receiver on your whoop, you will need to set your baud rate lower or else you'll get endless telemetry warnings.
@kboo9180774 жыл бұрын
Thank you that explain me a lot of things
@ImaginationTech4 жыл бұрын
Happy to help! I have another version of this video with the music turned down. It's in the description :)
@zyclonic52873 жыл бұрын
Is this also possible without sd card? My sd card reader is unfortunately broken
@ImaginationTech3 жыл бұрын
QX7 firmware is fine to run without an SD card. However, you won't have the scripts. Workaround for that is to plug your Crossfire module to a computer and change settings via TBS Agent.
@zyclonic52873 жыл бұрын
@@ImaginationTech thanks for the answer! So its possible
@xmods4Reel3 жыл бұрын
When I run OpenTX under the settings, I only have the option for Lua NOT "luaC" for some reason. Anyone know why this might be the case?
@ImaginationTech3 жыл бұрын
Might be the OpenTX version. Newer versions don't need the luac anymore.
@ImaginationTech3 жыл бұрын
I have a video on the Inverter Mod for the QX7 linked in the description. Mentioned it there at 8:46 that you don't need luac on OpenTX 2.3.1 and later. So you're good.
@minkorrh4 жыл бұрын
I guess Betaflight 4.2.1 uses an auto script as all I did was to select 'crossfire setup' and it took me right in. No lua script to look for (OpenTX 2.3.9). only thing is my receiver (nano) isn't showing in Agent-X. Anyone have any insight?
@ImaginationTech4 жыл бұрын
Yeah, that would be the OpenTX update for the Crossfire config shortcuts. No more messing with lua scripts. I have not updated my OpenTX yet since the ACCST/ACCESS fiasco. Maybe I'll check it out.
@sagem7114 жыл бұрын
hi the crossfire without the antenna on the radio is not gonna burn without it on?
@ImaginationTech4 жыл бұрын
Nope, it's safe. But it's good practice to put them on, unlike me. 🙃
@sagem7114 жыл бұрын
@@ImaginationTech ;-)
@PhBikeLife4 жыл бұрын
Hi Sir, whats the voltage range of the crossfire nano rx? Can I put solder the 5v rx wire to a battery positive on my mobula6 board?
@ImaginationTech4 жыл бұрын
It needs 5V. Batt positive of the mobula6 is only max 4.2V, which is already below the threshold of maybe 4.5v before the nano rx cuts off. The Crazybee F4 lite board comes with a 5V BEC, so you can power it off a 5V pad.
@flipfpv45393 жыл бұрын
Hi there will the QX7s with this PCB Mod ... can it run crossfire at 1watt from the internal battery power supply Love you video cheers😊👍
@ImaginationTech3 жыл бұрын
Is that with the updated Micro Tx v2? Shouldn't be a problem, though 1W will drain your battery quite quickly. If it's the full-size module, you can plug in its own battery.
@overratedsrtchallenger4 жыл бұрын
Great tutorial! But my when I run the luascript on my taranis it says "waiting for crossfir" and it doesn't do anything all my pins are aligned and I can't think of anything else! Thanks!
@ImaginationTech4 жыл бұрын
When that happened to me, it was because my QX7 wasn't communicating to the module bay because I had it wired wrong. Also, check out the appendix video, there might be a clue in there, who knows. --> kzbin.info/www/bejne/o5m3ZX-lhMd0apY
@overratedsrtchallenger4 жыл бұрын
@@ImaginationTech what did you have wired wrong? Am I supposed to have the mod done to my qx7 first ?
@ismael_biber3 жыл бұрын
Why is the crossfire antenna not connected? 11:48
@ImaginationTech3 жыл бұрын
I don't need it while on the bench. You still have a range of about 10 feet which is more than I need. And no, you're not gonna burn your module.
@silinalexandr4 жыл бұрын
so what is the real range of it? did you make any tests?
@ImaginationTech4 жыл бұрын
Farthest I've done was maybe a 1-2km only, but people have done 5kms or more easily. On paper, it says it can reach 40km but that is ideal, I'm not sure anyone has done that in real life.
@zafoto_tm4 жыл бұрын
Will it work even if you do not solder the inverter in QX7?
@ImaginationTech4 жыл бұрын
Yes, with some caveats. I explained this at 10:56
@danandrewdeocampo63973 жыл бұрын
Sir bakit Yung crossfire ko..Yung ibang channel or switches Hindi ma recognize Ng betaflight..kahit ok Naman set up ko sa inputs and mixers sa TX..
@ImaginationTech3 жыл бұрын
Check mo muna if rx settings if naka 8ch or 12ch mode.
@danandrewdeocampo63973 жыл бұрын
Ok na Sir... functional na sya..naka 8ch nga sya..then I switch it to 12ch... tnx to this video...it's help a lot😁
@ImaginationTech3 жыл бұрын
@@danandrewdeocampo6397 great! Buti, kasi di ko na sure if hindi yun e. 😅
@kanenstuff4 жыл бұрын
Hi seen your post on FB nice video just wondering why you bound your rx with no antenna on your tx maybe this is the reason i have poor rssi its as low as 50 just 150ft away I bound mine with the antenna I het just as far with a xm+? Ingat po
@ImaginationTech4 жыл бұрын
Sorry, saw your comment just now as it went to spam. Without the antenna, you will have very poor range. It shouldn't be a problem when you're on the bench since the tx and receiver are close to each other. Other than that, it makes no difference if you bind it with or without the antenna. Do you get failsafe or just low RSSI? Could be damaged antenna, lots of interference, etc.
@kanenstuff4 жыл бұрын
@@ImaginationTech Hi I get a low RSSI reading and LQ starts at 300 but gets real low quick. After updating from 3.23 to 3.28 LQ is better but RSSI high is 80 but on my taranis its now 99 not sure what the go is and cant find any videos any ideas?
@ImaginationTech4 жыл бұрын
@@kanenstuff looks like the values are ok. What's your Max Power set to?
@kanenstuff4 жыл бұрын
@@ImaginationTech max power is at 250mw and dynamic is off i have the micro TX and nano se RX
@ImaginationTech4 жыл бұрын
@@kanenstuffdo some test flights, maybe 1-2km to see if it drops, goes up, or stays the same. Maybe there's some interference from where you're launching. Also, make sure your micro tx and receiver antennas are aligned (both horizontal or both vertical, but vertical has farther range) and the tips are not near carbon or other parts.
@mikevenable23144 жыл бұрын
So if I update my Qx7 will I lose D8 mode and my other receivers?
@ImaginationTech4 жыл бұрын
Depends on the version. I'm still on 2.2.x, but reading the OpenTX website 2.3.4 and 2.38 seems to have it, other versions might have it too.
@Reingekotet4 жыл бұрын
I dont have the crsf mode in my taranis qx7...
@ImaginationTech4 жыл бұрын
You need to change Internal RF to None/Off first.
@NeverenCH4 жыл бұрын
Is it normal that my QX7 starts to hum like crazy when i use my Micro TX V2 ? Is there any easy fix for it ?
@ImaginationTech4 жыл бұрын
Hum?! No that's definitely not normal, and not something I've experienced. Does it hum all the time?
@NeverenCH4 жыл бұрын
@@ImaginationTech I've done some research and it seems that the Buzzing/Humming sound is normal when using an external Module because the cables going to the speaker on the QX7 are not shielded. Could fix it with some Aluminium Foil on the inside or other but i just ended up taping my speaker shut :P The buzzing is pretty loud
@ImaginationTech4 жыл бұрын
@@NeverenCH wow LOL, I'll have to check that out. Might be how I routed my wires, or the wires I used? IDK. I'm not getting buzzing on mine, maybe my wires/mod are far away from the speaker cables? I'll have to take another look and see if I can reproduce that problem. :)
@bwasfpv4 жыл бұрын
Sir nabasa ko dati na kapag daw nagbbind sa receiver dapat medyo malayo yun tx sa rx kasi minsan may nasusunog na rx? Tsaka may tanong ako wala ba magiging problema kapag frsky receiver n ulit gnamit ko matapos yun mod sa qx7?
@ImaginationTech4 жыл бұрын
bwas fpv nabasa ko rin yun, in my case naka set to 10mW lang or di nakakabit antenna siguro kaya di nakakasunog. Pag 250mw or 500mw siguro. No problem ang FrSky since different modules naman ginagamit. I still use both Crsf and FrSky.
@therunandgunshooter31293 жыл бұрын
Salamat!!
@ImaginationTech3 жыл бұрын
Walang anuman :)
@KelkieFPV4 жыл бұрын
could you please do a mavlink and laptop tutorial with crossfire. i need help
@ImaginationTech4 жыл бұрын
I will! But it might take a long time. I'm sure others have done the same, but nevertheless I will make a guide in the future that is easy to understand.
@KelkieFPV4 жыл бұрын
@@ImaginationTech im not sure if its possable but would love to use the wifi on crsf to link to laptop
@KelkieFPV4 жыл бұрын
its possible!!!! i did it it works great. update crfs wifi to 1.17 make phone hotspot connect both laptop and crfs to hotspot and connect ardupilot to udp port 8888.make sure crfs his connected and udp is active. hope it help.
@MarkKunoff4 жыл бұрын
Thank you for this. Please consider turning down (or removing) the music next time, it’s way too loud and distracting.
@ImaginationTech4 жыл бұрын
Thanks for the feedback! I'll lower the volume a lot more next time. :) Or do you think these kinds of videos should be completely devoid of background music?
@scootroter48594 жыл бұрын
I was just going to mention the same thing. Great video, but background music needs to be much, much lower...making it actual background music. Thanks! :)
@scootroter48594 жыл бұрын
@@ImaginationTech completely void would not be bad at all. If you do use music, please make it barely audible.
@ImaginationTech4 жыл бұрын
@@scootroter4859 you guys will be happy to know then that my newest videos don't have background music! :D
@scootroter48594 жыл бұрын
@@ImaginationTech Co0ol!
@NiftyNodes2 жыл бұрын
thank you!
@elxero21894 жыл бұрын
The background music is way too loud
@ImaginationTech4 жыл бұрын
Yes, it was pointed by several other people already, so I've just re-uploaded a fixed version, here kzbin.info/www/bejne/qnbMeY2Il6dsldk :)
@slicomslam4013 жыл бұрын
the music is drowning out what your saying
@ImaginationTech3 жыл бұрын
Hey Paul! Read the Sticky Comment or the first line on the description. :)
@rusr93273 жыл бұрын
Can we not play the music in the back ground so loud🙄 b nice 2 hear what u are say lol
@ImaginationTech3 жыл бұрын
I'm guessing you didn't read the description or the pinned comment, the one that says "READ ME READ ME READ ME" 🤣
@MateuszmatexonyG3 жыл бұрын
You turn on modul without antenna!!!? Lol
@ImaginationTech3 жыл бұрын
Sucks for range, but yes I do on the bench. It's not a problem honestly.
@leoponce82ponce3 жыл бұрын
good guide.. but turn off the music!
@ImaginationTech3 жыл бұрын
This has been addressed already--a link to a fixed version is in the very first line of the description and also as a pinned comment, you can't miss it.
@johnsheehy61724 жыл бұрын
Had to stop watching because of the music. I may have to put up with it if I can't find the information elsewhere. Thanks for supplying the information but why did you think talking and music at the same time was a good idea.
@ImaginationTech4 жыл бұрын
Yes, it was pointed by several other people already, so I've just re-uploaded a fixed version, here kzbin.info/www/bejne/qnbMeY2Il6dsldk :)
@j.b2194 жыл бұрын
Great video. Get rid of that annoying bgm.
@ImaginationTech4 жыл бұрын
Yup, other people mentioned that, and already remedied. Check the description and pinned post for a BGM-fixed version of this video.
@tabdycollins2 жыл бұрын
Hopeless having the music - distracts and muffles the instructions. Useless to me - a shame.
@ImaginationTech2 жыл бұрын
Here's a "fixed" version kzbin.info/www/bejne/qnbMeY2Il6dsldk