Complete Guide to The Syma X5C Quadcopter for Beginners

A Guide to The Syma X5C Quadcopter for Beginners showing what you get in the box, how it looks with and without blade protectors, how to sync it ready for flight, the controls and a flight demo.
There are four variations of this quad which in order of release are...
1 - Syma X5 (Version 1)
2 - Syma X5C (Version 1)
3 - Syma X5C (Version 2)
4 - Syma X5C-1 (Version 2)
If your syma is not steady or flying correctly be sure you props are on the right way as shown here quadcopteruk.tumblr.com/image/... and give it an easy recalibration as shown here • How to Recalibrate & R...
Get the Syma X5C Quadcopter Here: www.gearbest.com/rc-quadcopter...

[@Foolio2008]

Nice video! I'm getting one of these soon and can't wait now after watching this, it looks like it goes further than I thought too!

[@gekritzl]

Very nice demo, thanks! Mine will arrive in 3 days, looking forward to it.

[@eyerock36]

Just got this for Christmas. Your video was very helpful and inspiring!

[@SamNetworkYT]

Very detailed video! Thanks, it'll be useful when I get my X5C!

[@robertbowen9417]

Really enjoyed the video. I just bought one and was very pleasently surprised at how nice it was. It is very intuitive to fly and the video, while not of mobius quality, is very good. As soon as I get decent with it, it will remove the guards to lighten it up but in the meanwhile they will save some blades.

[@AlexDC93]

Just ordered one of these online to learn how to fly quadcopters. One thing I have seen that is recommended is learning to fly with auto stabilization turned off so that you develop the multitasking and coordination skills required for more complex and faster vehicles. Is there any way to turn of stabilization or auto hove with this quad?

[@tremorsross11]

Hey can I have some help. I got this thing today and when I first tried it it worked great but now when I plug the battery in the lights go on so I try to fly it but then it shuts down so I need help

[@ModPCLM]

Just got mine a few days ago. Loving it, it's lots of fun. I have to be careful not fly it much outside since there is a bunch of snow on the ground. I love the flips! It's done a double flip a few times but I've also learned if you kill the throttle just as your copter is starting a flip you can do multiple flips. I've smash it a bunch of times into the ground and stuff around the house and still no damage to it. Very happy with this product so far and I hope it doesn't break on me lol.

[@xtratalk1]

Yeah it's a great quad and very tough, awesome to hear your having fun with it mate it's a great hobby isn't it?

[@ModPCLM]

xtratalk1 Thanks for the reply! Love your videos. And yes it's a great hobby, I'm already looking into a build for a racing drone for the summer. I'd love to hear suggestions if you have any!

[@camper234]

5:44 How do you 'adapt' to the front changing position please?

[@harbo0151]

I've managed to get another and I'm using mode 2 instead of mode 1 because it seems easier to handle I've also extended antenna what mode you use.

[@jlwrailton]

Hi all having great fun with this, however now only three of the props spin up, will start with a but of flicking, any thoughts on what could have gone wrong? Thanks in advance John

[@SukhdevTanejaSK]

can you tell me how to fly it in lower height as my syma X5C always flow high

[@TechWalker]

I decided to watch this after having one of these fly away and then the other crashing into a tree. Definitely cleared things up! Thank you!

[@tinamiles9198]

Found mine in a vacant apartment doing make readys i charged up the battery and it works but it wont fly level what am i missing first time flying one

[@natserog]

still cant figure the difference between modes and also having hard time trimming it out. If its going to the right do you click the trim to the right?? or is opposite?--thanks...just learning

[@zetaarias]

Great video, thanks a lot, i receive mine today, but i had a few problems to control it.. its my first time with a quadcoptero or with a any RC fly toy, any suggests, or you plan make a video showing how you use the remote control

[@JosesGarage101]

hi. great video. how can i calibrate when the drone intent to raise without moving the left stick. 2-3stop down would be great but how??

[@gkey06]

can anyone tell me if this use the same controls as the traxxas alias? Like if I know how to fly the Alias I would kno how to fly this?

[@ForestorMoonlian]

Hey I got one X5C but it doesnt seem to connect to the remote... (when I try to do the left joystick "straight up, and then down" thing, the quadcopter simply do not seem to be connected and the light continue to flash.) Do you know how to fix it?

[@Captain4468]

If my RC CONTROL BATTERIES ARE LOW WILL MOTORS WORK PROPERLY STILL ? Just wanna know in case I have this prob

[@randomstuff53078]

what about high low mode? what's difference and how do I know what I'm in

[@ddssdickday]

Very nice video. I notice that the prop guards snap in okay but there is also a screw in each guard that doe not line up with the outer hole. Are the guards made for different models? They seem secure and the props don't hit them. Thanks

[@plasticbaldy]

Can the mode be changed on the screen so that throttle and aileron are on the left stick ?

[@ericgilbreath4362]

I have 2 syma x5c quad copters and nether will flip. I push the top right button and quickly push the ailiron control stick but nothing happens. please help

[@jorgeassad]

How long does the battery lasts for this one compared to the x8 ?

[@zacrobinson575]

can someone tell me if you can backflip these? and if you can what do you press on the transmitter? thanks guys

[@d-rumnb-ass4354]

I got a Syma X5SW for Xmas and I've been having some problems. When i take off it'll start turning one way or another or swivel the opposite and so forth. I feel like I've tried every damn combination on the remote to get it to just stay still and just HOVER when i take off! Anyone have any ideas? Would GREATLY APPRECIATE SOME HELP HERE. THANKS

[@castillo12359]

How do you know if your too high? I don't have it yet but im about to order it

[@onlinewithmac1]

Just got the Syma X5c-1 but did not have the sd card? Very dumb question? How do U download the video to your laptop, and where can I order the sd card???

[@projectink]

my controller will not stop beeping and wont show the batterie power but it works fine whats up with that?

[@daveshultz7765]

Wish it was as easy to fly as you make it to be. I'm still learning with mine but can't seem to keep it in the air for more than 2 minutes. Also... I have trouble getting it to move forward and backward. Is that because of the time it takes to get the signal from the transmitter to the copter? Just wondering. Also found that if you drop these into water like I did (ditch), just give them a day or 2 to dry out.

[@Ronny_C]

So what happens when it loses connection to the controller? Does it go down on it's own or will it just crash?

[@unityelt]

I just ordered this. Im so exited. Tyank you for the video.

[@Cheddarrl]

How is it :D I love mine

[@unityelt]

dontDrop_That Oh it's so much fun, i uploaded a video of me trying to fly it. Its easy to fly, but i have no experience, i can't keep a steady hover. Like im not sure hot to make it just satu in play and float.

[@jedburgh01]

great vid, do you know if the FODA Hawkeye D15-F is the same as the SYMA? It looks exactly the same

[@jmsayer2061]

About 7 minutes.

[@mottynamer3347]

Thank you very much your vids have been very helpful and I really enjoy them .

[@xtratalk1]

Thanks Motty :)

[@lucasleon5900]

It won't let me upload the videos on my Mac it says something about not be supported or something someone please help

[@wjp255]

I just got mine. Very novice. It looks like the green lights indicate the front of the craft?

[@joeshmo95]

how do I put recorded footage on my laptop is my question

[@ahmedhanfey]

actually i am pressing up on the throttle but its not flying, the blades are spinning but not flying am I missing something ? i really got frustrated , Any help plz ?

[@danielreeves1998]

so. how do i switch from mode 1 to mode 2?

[@EnriqueGonzalez-rm2wh]

Using the X15 different drone same controls like in your video???

[@TommyT_]

So much fun for £38 quid +£12 for extra batteries (Amazon) Do you know what SD cards it supports is 4gb the max?

[@Frankallen12]

Thanks so much xtratalk1, for all the help you give to us beginners! Please try to do some videos on the Training aspect! Thanks!

[@xtratalk1]

We will do and thanks for the comment :)

[@adjones723]

Thanks! Ended up working perfect!!

[@xtratalk1]

Great stuff, glad to help and hope you have a lot of fun with it like we have :)

[@SINCLAIRRESEARCH]

hi saw one second hand and gotton it for 20 pound, im 63 and never used one , use to fly model aircraft years ago. so found your instructions as none with mine very useful, im very interested in build a quad bike ,so we thought start at the novice end and learn about them.so found your video very useful . if we get hang of this one we may spend real money ...lol...what would you reccomend for our next one ? best wishes . SINCLAIR RESEARCH.

[@steve30b]

very good vid. thanks, off to buy one now.

[@KpopN_AZN]

Nice tutorial. Thanks!

[@jesuel55]

Friend, I am unable to change from mode 1 to mode 2, follow the instructions in the User Manual but I can not. Could you tell me how do I change the mode 1 to mode 2 and reverse?

[@djshotty]

While the controller and drone are switched off, keep pushing the button/switch underneath the right control stick with your finger, pushing it to the right hand direction to hold it there for the same time as you switch the controller ON. The controller will long-beep, then look to the left of the four smaller circles at top-center of the LCD screen for what Mode the controller is in. Repeat this procedure from the beginning (turn controller OFF) to change controller Mode from 1 to 2, or from 2 to 1 depending on what control preference you like from pictures in the instruction manual Page 6 and 7...

[@joeclemente3541]

Mine will not charge. When i plug the usb into my computer it flashes red for a half second and goes dark, this is an out of box problem and I am sure that i have connected the wire to the charger correctly. Help?

[@Khonic23]

Sucks to have bad luck my friend. Mathematical statistics will always prove at least 1 in 1000 electronics will malfunction

[@aussieview124]

Thank you. It was like having a friend come over and show me the ropes.

[@xtratalk1]

Glad to help and thanks for the comment :)

[@carolcheny]

Question: when I take off, it always veers to one side. Is it because when the gyro initiated, the surface is not level? or do i need to do something to change the remote? what are those fine tune stuff?

[@xtratalk1]

You can easy recalibrate your quadcopter as shown here: kzbin.info/www/bejne/npmvfpWnaLGeqK8

[@OwT0121]

Brilliant videao. I opened and set up my new Syma X5C all in accordance with manual. However when i accelerate upwards the quadcopter doesnt hover or fly, I cannot get it to set off. What could be the problem?

[@xtratalk1]

If it's not going straight up when you press the throttle then it's likely you have the props on in the wrong order, it's very important to have them on the right way as two motors go one way and two the other. Make sure they are on this way: imgur.com/q7Pm5rf

[@xariawoodard571]

how do you fine tune it though??

[@TheOldmankk]

Got a cheap bargain from Taobao.com and getting started to learn how to fly. Thanks for your quick introduction, Pal.

[@xtratalk1]

No problem and hope you have a lot of fun flying :)

[@philosophicsblog]

Nicely, mate. Thanks.

[@piqah1997]

how do i fix if one of the propeller is not working?

[@legendairycow1727]

I can't wait to get my own quadcopter

[@scottydog2871]

Can you charge these up only through USB on laptop and other devices on a trickle charge or can they connect to your mobile charger...

[@djshotty]

Not that I've tried it myself, but maybe one of the wall socket plug type USB chargers could work faster. Using a Samsung laptop with a USB 3.0 port, my average recharge from dead flat to 'red light out' (meaning 'full charge') is 25 minutes...

[@GumriRN]

While your YT clip was 1 of the more thorough showing HOW TO WORK THE CONTROLS, I'm sure I speak for other #DroneBeginners, who's want to see someone spend an entire video on the Left & Right Controls! So many guys just spent 2 minutes on the controls & then the next 12-20 minutes showing-off their good (or in many cases bad) flying skills.

[@zedman2724]

Good video. Thanks it helped

[@ethankeogh6272]

Thanks!it helped alot

[@rajeshparikh8858]

One has to orient Syma x5c properly before flying. Keep the drone's camera end facing away from you. The correct orientation will ensure controls do what you tell them to.

[@davemcnevin763]

Just brought one an can't wait to fly it an have fun with it!! Just wondered if the lcd screen on the remote controller gave you a view from the camera?? It was not clear in the details On amazon

[@xtratalk1]

Hi Dave. No it isn't FPV, the video records to a Micro SD Card which you can then retrieve on your PC/Laptop but no live FPV view.

[@TheSunBourne]

Hello I bought one of these recently thing is only one rotor responds to the throttle to any point of acceleration. Question would it be likely the other three motors are flawed? or perhaps the gyro is not working properly? (does not lift off, only rotates clockwise currently / or one side (side with the strong motor) lifts off and eventually flips it on it's back.) is there a simple test to better diagnose this? Thank you for your help.

[@xtratalk1]

Yes it may just need recalibrating which is really easy to do. See this video kzbin.info/www/bejne/npmvfpWnaLGeqK8 and if that does/doesn't work let me know...

[@Spare14All]

Nice Vid! How do you 'switch' mode on this? So that when you move left/right with left throttle stick the quadcopter moves in that direction rather than spin.... and when you move right stick left/right, the copter spins....? im sure you have to hold somthing down while switching on Tx but cant figure it out... thanks, Happy New Year!

[@xtratalk1]

Hi Spare14All. You can change from Mode 1 to Mode 2 by pushing in the trim button while switching the remote control on. On some models it's the trim button on the left of the power button and on some it's the trim button on the right of the remote.

[@RandyCandyCs]

What do the other 3 silver buttons do?

[@DukeJon1969]

Thanks so much for posting this guide. I got one of these recently and I have a few questions regarding the camera. To use it I need to hold down on the button to start recording until I hear a long beep, but do I need to hold the button down again to stop recording? The manual is a bit ambiguous, it says the recording will stop automatically when the remote controller is turned off. When can I start recording, when the controller is synced to the copter? Is there any indication on the LCD display to tell me when it's recording. The reason I am asking these questions is that when I check my SD card after flying I often find that many of the video files are 0 bytes in length, and occasionally they are more than 0 bytes but I can't copy them from the SD card. I found a way to properly timestamp the files (can't remember where) but what would also be useful it to stop the audio recording - it's just motor noise, the space would be better used for more video. Many thanks in advance!

[@xtratalk1]

Yes you need to sync to the quad first or it won't get your command, when you have been filming video you need to press the button again and stop recording and it then saves properly to the SD card.

[@DukeJon1969]

xtratalk1 many thanks ;)

[@Leann_K]

Thank you, I appreciate it!

[@jonhill8741]

which program do i need to watch the videos on this thing, I have a mac.

[@xtratalk1]

You need to download Flash Player get.adobe.com/flashplayer/

[@Uber_Versace]

Brings back an old memory of mine. About five years ago I got one of these for Christmas I was incredibly excited but then I discovered the camera didn't work and I was like well it'll still be fun to fly around like an RC helicopter I took it out it went about 20 feet up in the air and then just fell out of the air slammed into a bush and completely quit working I was like well this is a complete disaster but at least I have a working SD card that came with it no it was snapped in half so we brought it back to Kmart and decided to buy a different one and the thing is the packaging was very misleading because it was a freaking Micro Drone in a box the size of something midsize with a very misleading and unproportioned picture I flew that thing around in the house for about 2 minutes and slammed into the wall and snap the propeller and I just never cared to replace the propeller and just left it alone for years Its in a bag in my shed somewhere I don't know if I ever have the motivation I might buy propellers for it and

[@michaelmcdaniel8968]

Can anyone help me with mine? It didn't sync initially. I tried the original instructions, some similar instructions that reverses the order of drone/RC power up, and even the calibration. The lights never go steady but remain slowly flashing.

[@zachrollins4569]

Michael McDaniel when you start it up start the drone pull your left hand lever down and turn on the controller then push it up then pull it down like what he did but did not say it will also beep 2 times

[@twodragons1235]

I just ordered my syma x5c looking forward to it : )

[@DrewCompton00]

I ordered mine a week and a half ago and got it today! It's a lot of fun. How's yours

[@twodragons1235]

Drew Compton i ordered it 14 july and it still coming. 😯😯

[@twodragons1235]

Where did you ordered it?

[@davidmaddison2628]

I've ordered one and can't wait to get it. Thanks for the videos. Any idea how much payload this could lift?

[@CoseCinesi]

Not to much. You can replace the stock camera with #808 keychain for better video, adding few grams. Someone managed to lift a mobius, drastically reducing flight time. In any case we suggest to remove the prop guards and also the landing skid to eliminate unnecessary weight.

[@xtratalk1]

So far I've had it carry a plastic carrier bag, a spy key chain cam and a full metal sparkler amongst other things so it is capable of a little weight.

[@DiogoAlmeida10355]

mine doesn't works... it doesn't fix the lights i know in the manual on page 10 it says to adjust the band on the transmitter the same as the band on the quad copter but it has no instructions on how to do that. how does one adjust the band?

[@xtratalk1]

You shouldn't need to adjust the band the control and quad should match. Make sure the quad is on a level surface, then turn on the control (make sure the throttle is in down position) then switch on quad, the lights should flash fast for a few seconds then go steady, then you need to push straight up and down on your throttle and that should sync it up.

[@movimentosacerdotalmariano6641]

hi, I just bought one for me and I'd like to know how hight does it go? 50m,100m? tnx.

[@xtratalk1]

Hi Andrea, it will go very high, basically it will go as high as you like so long as it is in range. 50m is the approx quoted range on the standard X5C models and the newer version the X5C-1 (see my other videos) is quoted as having a much further range. You can easilly extend the range of the X5C, have a look at my "Syma X5C Remote - Easy Antenna Range Extender Mod" video to see how. Due to the many factors involved the height possible varies so it's hard to give a certain answer but if you take it outside I'm sure you won't be disappointed. One thing though, if your new to this and it's a windy day don't go too far at first as it's easy to loose control, like anything the more you practice the better you get. Have fun :)

[@pxrxdox]

Thank you for the explanation

[@enissan45]

good video thank you!!

[@bucklee2945]

nice guide! what is that beeping sound just before you 'flip' the quadcopter?

[@xtratalk1]

It beeps when you press the flip button to confirm you've pressed it, then any push in any direction will make it flip in that direction.

[@Varro252]

On ebay they are selling the Syma x5c with out a transmitter can you any transmitter?

[@xtratalk1]

You can't use any transmitter only ones that are compatible. Even the old version X5 controls will not work with the new X5C quadcopters so make sure they will bind before you but ;)

[@kobikhong4850]

My Syma was working before, but when i removed the SD to view the pictures and then put it back into the copter, when i turned it on the lights were flashing and it wouldnt fly when i turned it on.

[@xtratalk1]

Try removing the camera and see if the fault is gone, if so it looks like a problem with the cam, also try reinserting the SD card and formatting it.

[@LordQueezle]

Hello! Thanks for doing this video. It has really helped me start out me "quad" journey. :) I got my copter (X5C-1) yesterday for Christmas and I've been having a lot of fun flying it around the house. Now I'm just waiting for a nice day to take it outside. My Question: What is the crash durability of this model? (general question I know but take it any way you want) any answer will be fine. :)

[@xtratalk1]

They are actually pretty durable. If you're new to quads and practicing inside then putting the prop protectors on is a good idea at first as it will save clipping your props. Outdoors they are good, I've dropped them out of the sky from high altitudes onto solid ground surfaces and they've survived most crashes, the light weight of them helps with this.

[@LordQueezle]

xtratalk1 Nice! Believe me the guards where the first thing I did. (I figured it wasn't was to fly a propeller into someone... or the tree...) :P I actually was able to do a test flight outside today and it worked wonderfully. There was some wind drag but to much that it was hard to fly... I'm loving quads more and more!!!!!!

[@xtratalk1]

Lord Queezle Ha ha yeah they're awesome and really addictive ;)

[@nialljamesbuckley]

Your videos have been very helpful - thanks! had ours about a week, works great. I can't figure out how to change the time-stamp on the videos though, they all record as if they were created in October 2013

[@xtratalk1]

When you view your SD card look for a file called "TIME.TXT" and delete it. An alternative is you can set your own date. Create a text file called "time" so you have time.txt and put the current date and time in the following format: 2015/03/15 15:02.00 and save this and it will correct the date and time.

[@nialljamesbuckley]

xtratalk1 hmmm, i don't see such a file (hidden or otherwise) on my sdcard. i might try your alternate method and check back. thanks!

[@xtratalk1]

You are OK deleting all the files on the SD card, all that is needed are two folders one for VIDEOS and the other for PHOTOS. If you still can't get rid of the date then method two should at least fix the date for you.

[@nialljamesbuckley]

xtratalk1 it sure did. thank you so much - i really appreciate your help. enjoy what's left of your weekend

[@xtratalk1]

b Glad to help, have fun flying :)

[@stathismakrygiannis3595]

Can somebody help me???...... The camera is always green even when i presses the up right button of the remote and no pictures-no videos have been recorded (the sd card is inside the camera). What could be the reason??

[@xtratalk1]

Try disconnecting it and then reconnec it firmly. Then when in flight hold down the top right button (on the top right of the remote control) for 1-3 seconds, it should beep to indicate it's recording.

[@geraldcyr7967]

Can i ask for help how to let the drone fly at that same level and steadily at the same place

[@vg5157]

If you trimming the device well

[@milin6983]

How can I identify which are the rotating and the reversing blades and it's proper location?

[@xtratalk1]

Two go one way and two go the other way, each of the matching motors are diagonal to each other.

[@raresoupninja]

Hey buds I love your videos by far as big of syma supporter as I am but I recently. Ordered the. Three blade propellers and am having issues now with jello an was wondering you run two sided tape on your Canada as an angel mod how does that help jello thanks for the good work on the videos

[@xtratalk1]

Yes the main cause of the jello effect on quad cameras is an insecure camera, fixing it securely with strong double sided tape should fix this. Also be sure you props are on the right way as shown here quadcopteruk.tumblr.com/image/115223772044 and give it an easy recalibration as shown here kzbin.info/www/bejne/npmvfpWnaLGeqK8

[@santiagogrossi9077]

Hi!! thanks for the video. I used my drone every day yestarday. Today i can't in to the ready for flight state. I turn on the drone, turn on the radiocontrol, i go up and down with the thortle and nothing. I charge the battery everynight, change the batteries of the radiocrontol and buy another battery of drone. Can you help me? Thanks!! Santiago, Argentina.

[@xtratalk1]

Put the drone on level surface, then turn on control, then turn on drone and wait for lights to go steady. Then go straight up and down on throttle. If you do it in that order and it still isn't syncing it looks like you have a problem.

[@JamesAtLarge]

I order mines yesterday

[@EnriqueGonzalez-rm2wh]

Mam oh man you are a pro..Should come to florida show me how to control the controls....Cant get it to fly with my control s maybe i am doing something wrond with contrl box...thank you sweet ride....

[@drummingbikedude]

Thanks for sharing. Very informitive

[@xtratalk1]

Thanks for the comment mate :)

[@ModestlyAmazing]

Hey wonder if you can help, just bought my son one of these but when I turn the controller on it doesn't beep it just buzzes and the green light in the middle flashes and doesn't control anything on the actual drone

[@shapsugh1864]

I know I'm late and chance you'll see this are slim but what did you do in the end? Did it work?

[@ModestlyAmazing]

@@shapsugh1864 Afraid not, we ended up chucking it 😔

[@TheWimpytech]

Please do. A video on vision quadcoptor

[@aadilmajothi1980]

Can an author of this VDO plz kindly direct message I'm having a lot of problems with mines

[@kennyodonnell7122]

This video made my mind up to get this quad and it's great except, I am struggling with the video, it recorded the first flight first and since then all I get is o bytes of video. I am gutted and don't know how to get this to video consistantly, hope you can help. Tried turning the video off before turning the quad off but same result. It flies very nice and would be perfect for what I want, that's to take on my motorcycle travels and taking videos of the areas I visit. Hope you can help

[@xtratalk1]

Make sure you push and hold the button in for video (as a short press just takes a photo). You should see the red/green light change on the camera to show it is recording, when finished make sure you press the button again to stop and save the video before turning off the quad. You don't have to fly it to practice and test the camera, if you still have problems then try reformatting the SD card on your PC or Laptop.

[@30kenton]

can any suggest a site that sells them for $50 canadian ,i can only find them for $100,also what version of the syma x5 seris is the better version thanks

[@xtratalk1]

Try Gearbest, Ebay or Amazon. The X5C-1 is the latest and best version but this is now sold and branded as the X5C.

[@30kenton]

Ok cool thank u very much

[@Hungrylion1000]

Excelente dia para todos! Preciso de ajuda dos senhores: quando ligo o controle do Syma X 5 C, ele fica ascendo e apagando a luz verde do controle e fica apitando, chegando até a incomodar. A pergunta é: alguém sabe como fazer o controle parar de ficar apitando e porquê ele fica apitando? Obrigado. (Portuguese: Google Tradutor).

[@lilchubs123]

Hello, thanks for the video. I have one question about the copter, after I take photos and videos how do I get the videos and photos on my laptop/computer? please respond I got this for Christmas I want to see the videos

[@gauravarora4807]

You will have an sd card behind the camera on the quadcopter pull it out and put it in a adapter to see the videos on your laptop

[@xtratalk1]

Yes that's correct. You should have got a little USB adapter included, put the SD card out of the camera into that and plug it into the USB port on your computer.

[@jasminesantos4360]

thanks! very helpful :)

[@JP1970]

Wonderful video---thank you--SUBBED!

[@GVherry]

I am a 72 year old beginner. Your video was essential to my startup. I hope to use this to record some of my more interesting ATV outings. See some of them at Jerry Hamby. Thanks.

[@oravraham7301]

+Jerry Hamby forever young respect pal

[@theironcreeper1483]

Jerry Hamby Iain

[@MoslyTed]

i think its a great hobby at any age. Well done sir.