Complete Guide to Water Tank Installation: Step-by-Step Tutorial and Pro Tips|| Water Tank

Complete Guide to Water Tank Installation: Step-by-Step Tutorial and Pro Tips|| Water Tank
Water tank installation involves several key steps to ensure proper functionality and safety. Here's a detailed guide:
1. *Choose the Right Location:*
- Select a flat and stable area for tank placement.
- Ensure the ground can support the weight of the tank when full.
- Consider proximity to water source, downspouts, and distribution points.
2. *Check Local Regulations:*
- Verify if there are any local regulations or permits required for installing water tanks.
3. *Select the Tank:*
- Choose a tank type, material, and capacity suitable for your needs (plastic, metal, concrete, etc.).
- Consider factors like UV resistance, corrosion resistance, and insulation.
4. *Gather Tools and Materials:*
- Gather tools like shovels, level, tape measure, wrenches, sealant, and mounting hardware.
5. *Prepare the Foundation:*
- Create a leveled and compacted base for the tank using sand or gravel.
- Ensure proper drainage to prevent water accumulation beneath the tank.
6. *Tank Placement:*
- Carefully position the tank on the prepared foundation.
- Use a level to ensure the tank is perfectly horizontal.
7. *Secure the Tank:*
- If required, anchor the tank securely to the ground to prevent movement or tipping.
- Follow the manufacturer's guidelines for proper anchoring.
8. *Connect Inlet and Outlet:*
- Install a downspout diverter to direct rainwater into the tank's inlet.
- Connect an overflow outlet to divert excess water away from the tank's base.
9. *Install a First Flush Diverter (Optional):*
- Consider installing a first flush diverter to remove debris and contaminants before the water enters the tank.
10. *Connect Pipes and Valves:*
- Install pipes to connect the tank to your plumbing system.
- Include valves for water flow control and maintenance.
11. *Install Filters and Pump (If Needed):*
- Fit a filter to prevent debris from entering the tank.
- Install a pump if you plan to use the stored water for irrigation or household needs.
12. *Seal Connections:*
- Use appropriate sealants and fittings to prevent leaks at connection points.
13. *Test the System:*
- Fill the tank with water and test the system for leaks, proper flow, and functionality.
14. *Maintenance and Monitoring:*
- Regularly inspect the tank, valves, and connections for leaks or damage.
- Clean filters, pumps, and downspout diverters as needed.
15. *Water Quality Management:*
- If using the water for drinking, ensure proper treatment and filtration.
16. *Educate Users:*
- If others will be using the system, educate them on its proper use and maintenance.
Always refer to the manufacturer's instructions and consider seeking professional assistance if you're unsure about any step of the installation process.

[@bholayadav6994]

Es duniya kapahla anokha plumber maine apni jindagi me pahli baar dekha hai 😂😂😂😂😂😂😂

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching

[@siralasrinivasrao8502]

First valve and then union to be fitted.

[@abdulsathar1677]

Right

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching

[@PraveenKumar-ie2jt]

Electricals and plumbing tools video bro

[@Food.city_boy]

Super bro 🤣😂🤣😂🤣😂🤣😂

[@GreenValve]

yes you are right！

[@muheelaljjed2099]

Bhai Kam to galat Kar rahe ho ball valv Union ke pahale lagata hai

[@roobibasha9548]

Yes

[@dipakambre1378]

Right

[@AjitKumar-oj7rl]

Koi galat nahi hai fitting me bhai ball walve chahe aage kar do chahe union ko aage kar do isme koi galat nahi hai o to sirf tanki ko aalag karne ke liye kiya jata hai bhai

[@NAIMKING78640]

@@AjitKumar-oj7rl tanki ka pani kaise rok skte fir agar pipe line me kahi leek ho to🤔

[@vinayverma8172]

Yes

[@kscipkkkk]

Only two wraps of Teflon tape needed on tapered threads, NOT THE WHOLE ROLL!

[@faisalmoazzam3969]

Nhi vo thik kiya hai cause it won't be leak

[@zdenekmachart8314]

I think, they say: put the tape on it.... Yeees and roll roll and roll :)

[@integrite839]

In that case, i think it can leak

[@kscipkkkk]

Water tank threads are called NPT threads and they are tapered and get tight after only three turns, a minimal amount of tape is required.

[@labhiseehra5811]

ਵਾਲਵਾਲਵ ਪਹਿਲਾਂ ਫਿਰ ਯੂਨੀਅਨ ਲੱਗਣਾ ਸੀ ਤੁਸੀਂ ਦੋ ਕੀਤਾ ਗਲਤ ਹੈ

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching

[@kantipanchal5718]

Why so much white seal tap ...Teflon tape is wound, less also can do I think, instead of full role consuming

[@syedahmad7048]

Why would you put union first it supposed to shutoff valve to tank then union and yes clean as you go.

[@arjunreddy4681]

Amma

[@ifeanyigchukwu4975]

Union before stop cork

[@mukeshkumar-or1uv]

@@ifeanyigchukwu4975 5th

[@muhammadshahzad9971]

I also want to say that😜😜😜

[@muhammadshahzad9971]

Only he want to make video but he dont know where is wrong🤭🤭🤭

[@frankseck1]

Why all of the Teflon tape?

[@arunranade8048]

ही plumbing ची माहिती सर्वानाच उपयोगी आहे This pluming technology is useful to everyone.

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@Shibuplumber]

वीडियो मस्त है भइया जी बॉल बॉल पहले होना चाहिए गलत कम में view ज्यादा मिलता है दोस्त

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@kingkobbys7065]

The Air Valves should have come before the Unions and also you have turned the Unions

[@liyat786]

Why using too much Teflon... Its causes crack the male adapter.and for the end cap why you using solvent..? Then what's the benefit of end cap...?

[@bosemp4994]

100 percentage the plumber belong to Orissa. Where he learnt plumbing. Great Oriya plumber.

[@AnwarHussain-bp9fv]

Gate valve k baad Union lagana chahiye,from Bangladesh

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@ArbazKhan-zv4dh]

RIGHT BRO YAHI M DEKH RAHA HU YAAR

[@pimp500store2]

Que tal jajajajajaja te pasaste de lanza con los 4 kilos de teflón para cada conector mucho gasto

[@camilobejarano3966]

Yo veo que es de eso teflón malo y delgado que no sella nada.

[@kantipanchal5718]

Near tank first shall be valve and then other fittings should be started, so whenever any maintenance work is to be done , can be taken up after shutting of the valve.

[@decorationprogramlive1897]

kzbin.info/www/bejne/n4TRgYJtip10nrc All moter ka deta sirf 1 mint mai nikale

[@reantadeo1266]

Correct 1st ball valve and then should be next union you know why because how to repair if trouble shuth

[@natarajanmarimuthu210]

@@reantadeo1266 @Rean Tadeo

[@danielh5685]

U r right!!

[@user-ox4hc6gf7t]

Are waha kitni achi fitting ki....Hamare yaha naye ladke bhi purane tarike fitting kar rahe

[@Md.ShantoAli-jh1wr]

Nice video😊😊😊 good job bro👍👍

[@bhaskaransyibumoin4135]

The drilling of hole on the tank was correct , however the plastic material waste which was inside the tank was not removed , tephlon tape applied is incorrect total wastage of tape , first you installed a black material then the vedio was edited it was shown in white . Save money and material of the owner so that it would be a learning opportunity for other PLUMBERS who do the outdated work and also for the new plumbers. Good luck for more improved vedios .

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@isthismehi3446]

Connect to the tank you must put valve before union

[@andreperait]

Hahahaha... before too long the floor would be crawling with pipes too...

[@nabirasulalam6003]

Yes bro

[@faisaljavedtv]

Also the air pipe should be before valve

[@satheesankrishnan4831]

Why you apply such a lot of tuflan tape ??what is the purpose of using some agent between treads?? It ll not reach full thread dear, and it may create crack in the coupling in the future , due to pressure in the coupling... you can apply litharge and glycerene mix instead

[@orlandodelrio63]

This guys spends more in Teflon tape than I pipes

[@danagreene7469]

🤣🤣

[@netrocker9990]

Yes. I was also thinking the same

[@brydengreenland3485]

Too much tape man

[@faizulluck]

Customer Ke Paise ke tha kaam with material nahi tha 😝😹

[@iqbalahamedinamdar582]

APVC or CPVC Pipe & fittings are durable than pvc pipe & fittings.

[@gulsherkhan8918]

Itna time leliya yar aur union se pahle ball wall lagana chahiye na agese khayal rakhna yar good job 👍

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@donaldlgianino]

Teflon tape sales video!

[@blueg3027]

An entire roll of Teflon for one fitting. My boss would fire me on the spot.

[@mohamedmansoor3652]

You are not plumber rong installation

[@blueg3027]

@@mohamedmansoor3652 I’m been plumbing for 10 years. If you are using this much Teflon with this head pressure then just quit your job. YOU ARE NOT a plumber Mohamed.

[@danagreene7469]

Ive never in my life seen somebody use that much virgin tape in my entire life 🤣🤣

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺

[@siah147]

It baffles me too. Then to add pipe cement!!

[@AK-ko3wn]

In India, most of the plumbers like that. When the fittings are in correct size, no need of Teflon tape.

[@SADDAMHUSAIN-tw9lh]

Kyo Bhai get wall ke jagah par union laga rahe ho. 1. Get wall 2.union 3.air pipe

[@faucetmeaning6107]

Your instructions are great. Love your vide and learn much. Keep up the good work!

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@Srk-Plumbing-Works]

Good video bhai air trr KO leboow ke jga lga dete to or unyan ki jga Ball KO 😁

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@RATANSIPAHI]

I'm new subscriber bhai

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@aurangjebkhan3084]

Valve se pahle union nahi lagta hai aur elbow ke jagah khara tee lagate to vent ke sath ek elbow bhi bach jata

[@ernestocipriano8121]

That is wrong installation gate valve first after uninon...why? If the union lake you drain first water?hehehe...

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺

[@kamrulhasan-er9lz]

You right

[@Speed_ZUp]

I love you anuraag bai pro cricket expert love you❤😘🤟🤟🤟❤ from India🇮🇳🇮🇳🇮🇳

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.

[@erickgarcia7948]

Aquí en México a esos trabajadores les llamamos chambones! Pésimo trabajo!

[@Kirankumari-dz8ph]

Ball Valve to union se pehle lgana chahiye or or elbow ki jagah t lgate to usi Mai air system bhi ban jata or bend bhi mil jata

[@muhammadrafique2889]

Good

[@sandhyadutta1034]

Plumber Is V V Good Mechanic fitting V V Well Thanks Take 1 hr

[@plumbingking5452]

Are bhai sahab app plastik ka pipe and feeting use kr rahe ho to app ko tank nipal ke sath union lgane ki kya jrurat hai directly connect kijiye na aur kabhi bhi tanki ko change karna ho to pipe line katna hi padega tab bhi lga sakte ho ap union

[@learnpassearnprofessional7467]

Thank you

[@IITIANBOY278]

Bhai hmari summer 1" inch Hain toh inlet 1" Hoga Toh outlet tank connector Kitna inch mein lagaye or basin Takk Kitna inch mein rahega plz batana Bhai ???

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@kaali000]

Gate valve, union நுக்கும் tank கிற்கும் இடையில் இருப்பது நல்லது.

[@harikadhi3110]

ஆமாம்,

[@insaf_ikram_love.]

அது stop valve

[@pankajkashyap4026]

Bhai Tum nea tank nipal kea badd kya kya lagya please reply bhai good feeting🎉🎉🎉

[@learnpassearnprofessional7467]

Thank you

[@AmitSingh_1997]

Kitna easy ho gaya hai pipe ka fitting kerna 😃😃😃

[@mdemdadhosslnchowdhury3650]

টেপে গুলু লাগাতে ২০ বছরে দেখিনি, প্রথম দেখে অবাক হলাম, কোন টেকনিকেল কলেজের চাএ ভাই

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@mdimranmdimran1732]

New new plumber

[@electricianplumber123]

Uniyan pele laga k sabit kar diya ki aap bhot ache pilamwar ho ....🙏🏻

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@asikparadaiss618]

Tank sea 2 hole kiya naa usmea pipe connection thiyaa uska connection ka name kya hea?

[@neiltorceno6051]

whats the purpose of the two long tube facing up?

[@user-wd1nl6xp4j]

لاخراج الهواء من الانابيب عند ملئ الخزان عند الافراغ

[@jahangirabbasi3715]

For air

[@saleemuddinkhaja6549]

Air tube

[@urbancompanyplumber4316]

Union kaun hisab se phle dya hai bhai agar hmko union kholkar pani stock Krna hga tb kya kroge.mai yeh kaam se satisfied nhi hu.....phle valve lgta hai uske baad union..

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching

[@shivamkashyap7242]

Nice good job ☺️👍👌💯

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.

[@heberromero2834]

Es una exajeracion de teflon,me equivoco?

[@shahbazakhtar3955]

work is incorect

[@learnpassearnprofessional7467]

What is incorrect??

[@AneesFathima-jb4rr]

First fiting value next union

[@darosa5741]

I don't know... I think they need more Teflon tape.😅🤣

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching

[@voiceoftruth1O1]

Show us how to install solar water heater?

[@lingopaix1981]

the airlock system was the best

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@MREPMONJUR]

Naice

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@TechnicalBrothers21]

Better one on our channel

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@arsalanferozi6817]

Valve k bad elbow ki jaga Tee Laga dete Air k lye tou zada acha tha

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@IITIANBOY278]

Silencio pipe or swr pipe dono ek Hoti Hain ya dono alag ????

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@subashraghavan6035]

It's high time to change the hacksaw blade. What a rusty one he is using

[@user-qd5fb1eb3k]

العمل فيه خطأ التنفيس الخاص بالخزان يجب ان يكون عند نقطة نزول الماء وليس تنفيس على البلاط ...،

[@user-jw4rv3ls3t]

والخطأ الثاني القفل او الكاك لازم قبل النونيه مو بعدها

[@sukhvirsingh5683]

Mechenic ne Sara kachra tanki me hi chhod dia safai to ki nahi. Not a good work.

[@allstatus6041]

First Tank Nipeel Tee Elbow Ball Vall Last Uonin Pipee Fitting Karana Bhai

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching

[@allstatus6041]

Thank you

[@gaushoolazam6240]

Bhai cam to flat kr the ho.phele union rhega .ush ke bad volwall rhega.nahi to thki Ka Phani bagar girne legaga

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@gkhan6166]

دوست پہلے وال لگا لیا کرو اس کے بعد یونین

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@bharatghedia4622]

How to repair mild hall in middle part of the tank

[@mohdayoubwagay7581]

Bai sahab pehle gate valve lage ga ya union...

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@quangthangtv]

Bó tay cho bạn này rồi , nhiều công đoạn quá .

[@bikinilover1853]

Alot of critics, but did he achieve the goal?

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@mohdayoubwagay7581]

Bai sahab jo kam kr rahe ye kam bagair fit kiye b kr skte the

[@learnpassearnprofessional7467]

Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.

[@pankajkashyap4026]

Mea bi bhai plumbing apprentice pea hu🎉🎉

[@learnpassearnprofessional7467]

Thank you

[@perfectplumber2213]

#parfectplumbar 👆

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@mjani9348]

Har bar union khil k lagana chaye solution joint me ja sakta hai or union useless ho jayega

[@SrinivasaRaoVVSRao]

Sir Air lock pipe should be kept before the bend... KZbin/DCS vizag

[@SrinivasaRaoVVSRao]

Yes, Later on we modified thank you for your valuable feedback. May God bless you

[@anamoly94]

u shud use two 45 instead of 90° bend for better water pressure

[@learnpassearnprofessional7467]

Thank you

[@mahmoudelbadry6565]

من الأمثل تركيب المحبس قبل الاكور التجميع

[@ombwallmagiccoat9681]

OMB WALL MAGIC COAT 🔥 क्या आप गर्मी से परेशान हैं क्या आप गर्मी से मुक्त होना चाहते हैं यदि हा तो हम आपके लिए लाए हैं गर्मी कम करने वाली बाहरी कोटिंग

[@learnpassearnprofessional7467]

Thank you

[@immanueldorai]

Avoid using excess gum and press firmly after putting the joints. Another important thing , routing the line from the motor should be close to the wall. If you route the way you have routed, it will be a disturbance while using the floor for any purpose.

[@learnpassearnprofessional7467]

Thank you sir for comment

[@immanueldorai]

@@learnpassearnprofessional7467 Thank you for taking my advice in a right spirit.

[@learnpassearnprofessional7467]

Wellcome sir

[@rosemarryumrail4785]

W0al00q

[@epworks3799]

Bro u made one mistake before using the unions first u should fit the gate volve then union, 2ndly instead of using double elbow u could easily use one tee and one elbow and that would be better and cheaper, first use tee the upper side of the tee u should connect the exhaust.

[@mohammadrizwanuddinjandp439]

Hana Solutions bhainsa

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@aknoorsingh9550]

Y saab jo gate valve ke paas elwo hai baha par tee lga dete 2 elwo weste hone se bach jate aur air vi niklti

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.

[@tomallen7699]

Used 4 rolls of Teflon tape- wtf?

[@jk.ambhire]

😂😂😂👍

[@mdsharif-gz1hr]

nice wark

[@marioperez1037]

La idea es muy buena, pero Eres muy Cochino para Trabajar y desperdicia demaciado material, eso al final lo paga el Cliente y eso no se vale, Ya que ellos confían en nosotros los prestadores de Servicio!! Saludos desde México!!

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺

[@rajgopalmaloth4292]

Is it 400 ltr tank.but in appearance its big and a higher cap one.

[@user-ly9bh2bz9g]

كنت باتعمل بعد المحبس القطعه التي على حرف T باتستفيد منها تهويه الى الاعلى والاتجاها الاخر الى الاسفل و وسط القطعه يكون باتجاه الخزان ومنها تكسب نزول اقوى للماء لانه المكان الصحيح للتهوية ومنها توفر للقطعتين التي على شكل L الذي اسرفت فيهم دون فائده .. وتحياتي وتمنياتي لك بالتوفيق

[@SrinivasaRaoVVSRao]

I cant read the Arabic literature... however thank you very much for your feedback. May God bless you

[@Louis7491]

Whole roll of Teflon tape😂 and he still insists on making an instructional video.

[@karamatali2460]

Min valve Hasmsh union se pehliy Lago bad mein koi fayda nahi farze Karo k valve band Kar k union open karna ho to tank ka saray water zaaay ho ga

[@saoudjal2726]

He is right a pipe features

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.

[@jamalhossain1118]

Pehle valve

[@lokeshshuryavanshi8791]

itni derr main tank k saath pressure pump bhi laga deta c.p.v.c. aashirwaad hota toh

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.

[@NiteshKumar-by2jk]

Need to fix union after Gate valves and for air pipe the T should fix at the place of elbows near the gate valve.

[@geethakumari3258]

യൂണിയൻ ഉള്ള കണക്ടർ കിട്ടും (സോൾവ്ന്റ് സിമന്റ്‌ പുരട്ടുന്ന രീതിപോലും ശരി അല്ല. ടാങ്കിനുള്ളിൽ കയറാതെ ഫിറ്റ് ചെയ്യാൻ പറ്റും )

[@bababanarasi1171]

Baal walb ke baad union lgane ka n bro?

[@jaswantsingh997]

Nice.video....🙏🙏🙏🙏🙏

[@learnpassearnprofessional7467]

Thank you

[@ahmadfaraz2265]

Sir khali teflon tape pani kasy rok sakta daga to lagaya nh

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺

[@sneakypete830]

I think you need more teplon tape...holy shit

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.

[@r-arts5628]

😅😅😅

[@mukeshkumarkapil9948]

Sorry for saying but you should put valve before union

[@learnpassearnprofessional7467]

Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺

[@NareshKumar-nf7mq]

सबसे बड़ी चुनौती ये है कि टैंक के फर्श में (सरफेस पर)पानी निकास की व्यवस्था बहुत ही जरूरी है।वाटर टैंक बनाने वालों को एक ऐसी व्यवस्था करनी चाहिए, जिससे नीचे जो गंदगी-मिट्टी जमा होने पर टैंक के अंदर साफ करना बड़ा दूभर और मेहनती काम हो जाता है,उसकी व्यवस्था सबसे जरूरी है। अतः टैंक बनाने वालों को कोई नई तकनीक से फर्स की गंदगी सुलभ तरह से साफ हो कि व्यवस्था बनानी चाहिए ।प्रायः होता ये है कि गंदगी साफ नही होने से बहुत से इक्विपमेंट RO मशीन वैगेरह गंदगी-मिट्टी की वजह से बहुत जल्दी जाम वो खराब होते हैं। अतः इस काम पर विशेष ध्यान देकर यदि टैंक बनता है तो वो ज्यादा पसंद करेंगे लोग। उसकी बिक्री भी अधिक होगी।👌

[@camilobejarano3966]

Yo veo que usa de ese teflón que es delgado y bien malo y que fuera de eso trae menos que el resto, yo en esas condiciones le mando un rollo de ese teflon basura también 🤷🏽‍♂️🤷🏽‍♂️🤷🏽‍♂️

[@cristiangaribay2971]

Eso de usar teflon es prehistorico Ahora llevan una goma o orrin como lo llamen en su pais el fabricante te suministra todo el equipo de instalacion completo

[@albertofranciscopelayo3581]

Que raro si en estados unidos siguen usando el teflon o pasta teflon

[@camilobejarano3966]

Prehistórico??😂😂😂😂

[@oscarsanchez6617]

Pasta sella roscas Siller.

[@asimashraf5856]

Why you don't install valve before Union now your union and valve both useless if incase anyone have to do something on this pipe line he have to waste all water then he can separate the line....

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@engineering1111]

Nice

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@mynamyna7602]

good..

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@jerrybabatunde3380]

Clean as you go. The plumber or tech doesn't have to wait until he finished the job before do the cleaning

[@muhammadrafique2889]

Air vent ke pipe wrong Lage hain air lock ho gi confirm

[@sambhajipatil1005]

@@muhammadrafique2889 को

[@willymariano9816]

this more than 400 liters tank bro

[@thomasponnan]

actually tank base should be less than the diameter of tank, otherwise rain water get into the bottom of the tank and plants like baniyan tree will grow there..

[@learnpassearnprofessional7467]

Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.

[@rebotiborah666]

Hahah banayan tree😀😀😀😂

[@thomasponnan]

@@rebotiborah666 you're also make.. it's banyan tree

[@thomasponnan]

@@rebotiborah666 anyway, thank you..