Thank you! I did side by side with laptop and performed maintenance. This was a top of the line demonstrative videos that i have came across. Thank You sir from Muncie Indiana.
@derrickbonsell5 ай бұрын
I haven't been trained on this procedure but I'll need to do it. It seems a lot simpler than i thought it would be.
@steelman863 жыл бұрын
I just bought a Deere 26G excavator and greased all of the joints yesterday but didn’t know about final drive etc. , i think i will get all new filters, oil so everything is new as I start my journey with this very helpful machine! Removing bushes, brush, stumps and will level back yard area close to my house for garage installation for my six vintage cadillacs !!.,thanks for braving the rain for we, the viewers! 👍👍👍👍A+++
@treemonkey_ma17183 жыл бұрын
Great informative video! I'm sure he appreciated that it started to rain at the beginning. Nothing like doing maintenance in the rain
@marioreyes1552 жыл бұрын
Excellent video and how He explains everything on detail 👌
@PawPaws_Place3 жыл бұрын
Thanks for the video. Don’t have one yet but was very informative for when I am able to get my 35g
@robertcook93754 жыл бұрын
At 3:00 you compare filters....they do not look the same....the original has the seal near the outside diameter, and the replacement closer to center...
@nkdave747 Жыл бұрын
I noticed the same thing.
@shanecampbell27173 жыл бұрын
Excellent video for future use on my machine
@WeGoOutdoors2 жыл бұрын
Excellent video thank you so much for taking the time to do this!!
@stewy_6042 жыл бұрын
Great video Keith! Very informative.
@oscarballesterosguzman53454 жыл бұрын
A good practice is always write hours of machine and date of service on filters
@lukesizemore11702 жыл бұрын
Awesome video, lots of great information for a Noob like myself! Thank you, very helpful!
@jaendre733 жыл бұрын
Excellent video! Thank you so much!!!
@alphadrains2 жыл бұрын
Great job, thank you.
@fredschwab234 жыл бұрын
Great video with nice tips, drive machine forward before filling final drive!
@larryabel35954 жыл бұрын
Great video would like to see how to raise cab
@maryriser7836 Жыл бұрын
What do I need to do to make sure my ac is working at max?
@garyp19308 ай бұрын
Is there swing gear oil
@rcbenavides702 Жыл бұрын
I put a whole gallon of oil in it and it was barely over the level; sure enough I started and let run to fill oil filter and the level went to exact full on the dipstick.
@mitchelljude41983 жыл бұрын
great video
@dougfrankiw42064 жыл бұрын
Thanks so much ... GREAT video
@briangarcia50803 жыл бұрын
when changing the hydraulic filter do you need to bleed the system to get the air out.(The manual says so) or just run and refill as needed
@precisionfilms377711 ай бұрын
I wondered this too but my dealer said it's not necessary. Only if you replaing the hydraulic pump.
@spiderpig58423 жыл бұрын
I think I can also apply this to my ZX30U-5A.
@ericwyman9723 жыл бұрын
Great Video thanks! Can I ask a question about my 50d? here it goes, It doesnt seem to have to much bucket curling power but there is plenty everywhere else. I just bought it. 6k hours. I have a 35 as well. I expected way more from the 50. Any thoughts?
@pingpong96563 жыл бұрын
Me excavator won't start after not being used for a month - it was running perfectly one month before. Cranks fine - just won't fire up... any thoughts?
@goat65244 жыл бұрын
"Do Not" use brake clean to clean out water separator! It will make the see thru plastic housing cloudy and then you wont be able to visually monitor . I know because I used it on mine
@gordondewald82673 жыл бұрын
Thanks.
@StinkyTeal4 жыл бұрын
I can't think of a weirder way to change oil.....wth was that
@tootoosick182 жыл бұрын
And he did that with no gloves and in rain. F that. Gloves and socal weather.