Complete Rebuild a POLARIS 500 From The Bottom Up! And a 425.

/ titaniummangarage
I'll show you step by step how to do a complete rebuild as I convert a 425 into a 500 engine.

[@trooperlife1]

Thank you.. very helpful video to increase my confidence in tackling this. Have a 97 Xplorer 500 that I am fighting to get running despite a new stator, flywheel, battery, coil, plug wire, plug, filter, fuel pump, carburetor, etc. Can’t get it to start without taking carb off and dumping fuel. Going to tackle the internals..

[@henryconnor4917]

Excellent Video, Rebuilding a Suzuki LTA750 top end and need to know what to look out for. Greatly appreciated.

[@nohandle5544]

Oh excellent, no nonsense instructions to service repair this Polaris engine. Appreciate you sharing this with us. Thank you very much.

[@TitaniummanGarage]

Your Welcome. Glad to help.

[@TravisInCanada1]

Such a helpful video I will be watching this a few times amongst others on your channel, thanks man!

[@TitaniummanGarage]

That's Awesome. Glad to Help.

[@MOUSEBOWEN]

Super awesome video thank you so much for sharing

[@genegibson3649]

Great video thanks for sharing you make it look easy

[@RayofallTrades]

Excellent video and explanation! Keep em coming

[@MrTraxxasJunky]

I enjoy your videos. Recently bought a 98 Sportsman 500 and yes I have had my hands full. You explain everything well keep it up I will be a Pro Polaris Mechanic! ha ha

[@TitaniummanGarage]

Sweet!

[@louismays9708]

Wish I could hangout with this guy and learn from him

[@brianmoore3659]

Great stuff bud!

[@gabortopi]

Thanks for the great video Brother...

[@Sonztee]

Hey there, just bought my first Polaris 500, this is awesome video for. New owner, don’t plan on rebuild but seeing you assemble this helps understand the internals. Thanks so much for sharing your wisdom ..

[@marcelinobalan7442]

Como ponerlo a tiempo el mottor

[@godfathergundogs2640]

Good job !!!

[@scottpinardi4991]

This is awesome I have a 425 low mile quad happen to have a spare engine out of a scrambler🇺🇸🇺🇸🇺🇸🇺🇸👍🏻

[@devinmitchell3073]

I love your video. I just subscribed. I have a 450 sportsman and

[@godsdozer]

excellent

[@bradgrannas3622]

Thanks helped alot

[@franklinarguedas4832]

I am talking about the dowel pins that go in the crankcase, the solid one, part number 3084840.

[@Frenemies2025]

great video buddy! Excited for the next video!

[@TitaniummanGarage]

Thanks Man! Glad you enjoyed it.

[@mikebray8795]

thanks for the vid very helpfull id like to see a vid of it running bet its fast

[@TitaniummanGarage]

Its a old video. I believe there is a link to click to see it running. Its pretty snappy off the line. I have a small dirt pile I jump it with.

[@jasonhamlett]

Wish i had this video a year ago! Great tutorial! Do you ever replace the plastic impeller with the All Balls metal one?

[@TitaniummanGarage]

Yeah! Definitely the way to go. Great product.

[@futuregamer5791]

Cylinder jug aka cylinder- 4 large 12 point bolts= 46 ft-lbs 2 small 6 point bolts= 72 inch-lbs

[@johnshepard1157]

Is this the torque value for the first 4 bolts he torqued before moving to the 4 bolts of the head? Not asking because you didn’t explain it well enough just want to make sure because I’m having trouble finding the torque value for the bottom 4 bolts lol

[@futuregamer5791]

@@johnshepard1157 Yes. It's the bolts that screw in around the piston. They sit down in it.

[@TheTechGuider]

got a 500 bottom end. connecting rod is in great shape. no end play and very little side to side. the main bearings are good to, turn smooth and no up and down play. but the whole cam shaft can slide left and right in the case maybe a half mm. what you think is wrong? i never split the case. you think something is worn, or maybe missing a shim? or should i just send it lol. have you ever experienced slight left and right movement in and out of the bearings on any of your engines. my other bottom end doesn't move at all.

[@chaddeyton1371]

Really helpful! I’m completely tearing down my 96 500! Do you have any guides on rewiring everything?

[@TitaniummanGarage]

Now that's a big question. I've rewired a whole atv. lots of wires. what are you asking specifically?

[@trentkohlstotebagselliott46]

Do you have a video on replacing the water pump seal on a Polaris Sportsman 500?

[@trentelliott1473]

What do you use to clean up the crankcase prior to build?

[@franklinarguedas4832]

By the way, I was told by a Polaris dealer in Australia, that the Polaris oil pumps are so robust that they never fail.

[@jasonschmitt7543]

Lies

[@stewp.3298]

I like your style! I have a 2006 Sportsman 500 EFI that's locked up, where would you start? Thanks

[@anthonypoole6901]

Do a 3 part vid bud im gonna want more information . Do you buikd gearcases as well?

[@Parayeet15977]

I’m pretty late on this but I’ve never messed with engines and this doesn’t look to bad. What all part need replaced when doing a bottom end rebuild,and do you think it’s necessary to buy a new timing chain when doing this

[@stephenhall5430]

Hey man thanks for the rebuild of the 500. I am curious what brand of impact wrench do you use .

[@TitaniummanGarage]

I have a Milwaukee and a Dewalt.

[@TheTechGuider]

When I removed my crank my bearings stayed on the crank. The double bearings on the pto side. Did this happen to you and if so how’s you get them off.

[@mikecreagh9273]

I really appreciate the video its very helpful. i do have a question do you bottom out the nut on the water pump impeller? it seems like it presses the impeller onto the housing? thanks in advance for any feedback!

[@TitaniummanGarage]

I just snug it up with locktite. you don't want it rubbing against the case. you might have to back it off a little

[@michaelnelson1911]

You are so knowledgeable about the 2000 Sportsman 500. I wonder if you could give me some guidance and direction on a problem I have. I dropped a paper cap from a fuel stabilizer into the gas tank by accident. I can't think of any way to get it out. How hard is it to get the gas tank off. Or maybe you have another way to get it out. I feel like I need a trick here. I really don’t want to take the tank off. I have taken the seat off and the side shields. I was hoping that I wouldn't have to remove all of the plastic shields.

[@TitaniummanGarage]

A paper cap? there are screens on the fittings going to fuel lines that stick up. you have to remove plastics to get tank off. but if it doesn't dissolve the screen should keep it from blocking anything

[@jeremiahjorenby2275]

The 425 crank has 5mm less stroke, so essentially you've created a 465cc engine. Great news for 425 guys since there are kits out there for $90 that include the jug, piston+rings, and gaskets. Funny that it all just bolts right up and the piston has the proper deck height.

[@TitaniummanGarage]

Right. People don't believe it when I tell them I do that.

[@TXCOyt]

Can you provide a link to this kit I’m having issues finding it

[@TitaniummanGarage]

@@TXCOyt There isn't a kit. I just bought the gaskets and piston on ebay and honed out the 500 jug.

[@jeremiahjorenby2275]

Got my 425 running about a month ago with a 500 rebuild kit. Everything fit perfectly, has good power.

[@franklinarguedas4832]

Thank you, I will take a look at removing the cam and see what happens with the oil. What about the sheared bolt from the timing chain that fell inside the engine? Has it happened to you, as well? I trying to figure out a way of extracting it from the engine without having to dismantle the whole engine, too painful, mate!

[@TitaniummanGarage]

No I haven't. I have had to pull out piston skirt out of the engine. If you pull the cylinder and piston you should be able to get a magnet down to the bottom of the case. If you have a magnetic wand. I ended up splitting my case. Your just looking for a bolt so It might not be that bad.

[@osbornebay944]

Subscribed Sir. Really like your instructions that are clear and filled with experiences, super helpful. To test sparks on Polaris predator 500, with key harness removed (ordered a new one), is it going to spark? Any other items are restricting spark?

[@TitaniummanGarage]

You'll need the key unless you jump a wire to 2 reds. the kill switch will restrict it as well.

[@dmoyanaise]

Rebuilding my 425 and might get the 500 piston & jug. Did you use the 425 carb & exhaust or did you have to upgrade to the 500 carb and/or exhaust?

[@jonbraddock5545]

the 425 "engine" crankcase. Was the crankshaft assembly and connecting rod all 425 as well? so you just changed the piston and just. The cams are the same but the valves are different numbers between the 425 and 500. Would've been nice to confirm if the valves were the same size with dial calipers.

[@devinmitchell3073]

I have a 2018 sportsman 450 and when it's idling its making a clicking sound but it goes away when I give it gas. Would it be the valves that's making the noise

[@dkkauffmanjr]

Can you remove the chain guide without removing the head? Also I need to replace the timing gear on the crank and the split nut is proving difficult in to coming off. Is there a spanner socket for it?

[@TitaniummanGarage]

The right side chain guide is positioned under the head so you have to remove the head to get it out. The left or topside could possibly come out without removing the head with the chain out of the way. There should be a socket on ebay for that goofy nut. Or you could make one. Some guys make them out of pipe and notch the end out.

[@futuregamer5791]

Torque spec for cylinder jug bolts? Did I miss that?

[@adamtucker8330]

I am struggling to find a torque spec for the rocker arm tower bolts. I looked through a manual online and found 9 ft lb. that seems to be very light to me and want to be certain before putting it back together. If it is only 9 ft lb would it benefit having some blue lock tight to keep the bolts from coming out?

[@TitaniummanGarage]

I would do that just to be safe.it is an aluminum block so that could be right.

[@ISuckAtCOD1]

I've got a scrambler 500 ho 4x4 wanna rebuild it I googled the compression ratio and it's 10:8.1 but every piston I see that will work for it no matter where I look is 10:2.1, is that the actual compression ratio?... really don't wanna be down on power and speed.

[@kennethmorgan2704]

I got a 2013 Polaris sportsman with fi with 7600 miles on it, so with that said, it got to where it wouldn't cold start without holding the fuel down on it, so I would do a valve adjustment and it would be alright for about a month, or so, and then the intake valves would tighten back down, well, finally I bought new valves, and done a valve lap and installed them. If it starts with the same problem, do you think I ought to buy a new head and new valves to cure the problem?

[@TitaniummanGarage]

Sounds like your chain might be streached.Try to replace the chain. clean the carb and check the choke adjustment.

[@jimtraveler4073]

Hey T, thanks for your videos!! Would the 2007 sportsman 450 fall into this category of using a 500 top end? There's not a lot of information on it. Any suggestions? Thanks, Jim

[@TitaniummanGarage]

I haven't worked on a 450 so I'm not sure.

[@atonyrodify]

Hello I've subscribed to your channel great content but I have a question what is the standard Piston ring gap for a 98 Polaris 500 because i have the manual and it say that its supposed to be gapped at 0.20/0.36 is that correct Thanks for your time keep the videos coming

[@TitaniummanGarage]

Depends what piston you buy.

[@kelliemattison4724]

I have 2012 think the balancer shaft gear spoon. How can I find out if it did

[@JonB1991]

Great video quick question on the jug itself the 4 short bolts what are the torque numbers? I know the head bolts have a special torque sequence on the video you posted I just can’t find any specs on the jug bolts torque specs

[@TitaniummanGarage]

49 to 51 ft lbs

[@JonB1991]

@@TitaniummanGarage thanks !

[@anthonypoole6901]

Subbed . Man you have confirmed my tgeory same part different number thing! Ive seen that with a lot of polaris stuff out there particularly sprocket and axle bearing carriers and what not. I have a 2000 polaris 500 sportsman 6x6. Chain snapped busted rh of the gear case. My thougts are i had an alignment issue on tge new sprocket and the output shaft bearing. Got a lot of slop in that output shaft now. I cant find my gear case rh anywhere! Do you have a source for that part? Id like to rebuild the trans while i got this down. Also the sprocket was replaced with a superceded part on that middle axle . The old one was seized to the axle and i couldnt get it off. I bought this used from a guy had bad bearings back there and he just rode it that way for god knows how long. Well when it came tim to fix this , i ran into siezed sprocket on thw axle and rhe biggest of pullers only warped the old sprockt didnt budge it . So i had to cut the axle bearing carrier in half straight through the axle. The acle was badly damaged anyway so i was gonna have to replace it. But i could not get it out. The locking hubs were siezed up on one side as well . It was a real pain to get that back together. Well when i did i realized the sprocket would not line up proper. I need a spacer any idea where i can find one of those?

[@jblook7291]

Really liked the video on engine rebuild. I just have on question on the torque specs for the cylinder base bolts. I cannot find them anywhere. Or do the need torqued at all. I'd really would appreciate if you could reply what they are.

[@TitaniummanGarage]

46 to 49 ftlbs

[@jblook7291]

@@TitaniummanGarage Thank you so much. Also your videos are great.

[@keitht4428]

Good work! I have learned alot from your videos. I've got a real teaser for ya.. 02 500 ho just rebuilt topend, namura piston gaskets etc. Bored over as well. Anyway, runs great! But will only start with recoil, key cranks engine but no fire.. Any ideas?

[@TitaniummanGarage]

Thats a new one for me. I'm gonna have to research that one. Interesting! Refresh my memory. does the 02 have the key that turns all the way to start it like a car? Or is it the push button style? something in the wiring isn't reading correctly.

[@keitht4428]

@@TitaniummanGarage Turn key ignition, I've tried jumping power from battery, directly to starter with key in hot position, still no fire, seeing week spark while cranking with starter, strong spark with recoil..pretty stumped. I can start it but my girls can't. I appreciate your thoughts and suggestions very much!

[@JohnnyMentat]

What kind of crankcase sealant did you use? Polaris OEM Crankcase Sealant is about $50 for a small tube. Is the OEM sealant necessary or is there an acceptable alternative? Great video. I'm using it to help me rebuild my Magnum 330. Not exactly the same but a lot of what you show in your video is helpful. Thanks!

[@TitaniummanGarage]

I normally use 3m gasket maker. You can get it at a auto parts store for 18 bucks.

[@rmattas79]

Great video, i just bought a 4x2 scrambler 500 and the motor is locked up.. at least i know how to tear into it now.. is there a full rebuild kit out there? Thanks!

[@TitaniummanGarage]

I think so. But beware..some cheap China parts come with it.

[@rmattas79]

@@TitaniummanGarage great! You don't have a motor laying around do you? Lol

[@trooperlife1]

Question. After putting my 97 Sportsman back together, I learned the oil seal is leaking (oil leaking out of weep hole). Can this seal be replaced from the impeller side without disassembling the engine and splitting the case?

[@TitaniummanGarage]

I've been asked that a lot. There is a way but it involves a tin snips and a flat screwdriver. It usually ends up in scratching the surface. If you do it that way put a light coat of gasket maker down. Just a thin coat. It says not to but there is a chance if you scratch the surface the mechanical water pump seat will leak.

[@futuregamer5791]

link to the cylinder jug torque video?

[@patiencepeeler7103]

Sir question what is the torque lbs on the jug bolts ??? Can’t seem to find it working on this same build on a sportsman

[@TitaniummanGarage]

46 to 50ftlbs

[@franklinarguedas4832]

Which oil hose do you pinch to prime the oil pump? Merry Christmas, don’t drink too much Budweiser, mate. How is Covid-19 doing in your area? By the way? How do you pull the crankshaft apart? And putting it back together? Hasta la vista amigo. Ándele ándele, arriba arriba

[@TitaniummanGarage]

Have a Merry Christmas as well. We are getting hit hard in Wisconsin. I use a press to remove the crankshaft out of the block. You could use a big rubber mallet too.

[@concealit4800]

So Polaris made a 425 that had a 5 speed auto clutch trans I just wonder if u could make a 500 ho using a 500 jug cam and carb that thing would be wicked fast

[@TitaniummanGarage]

I tried. Put an H.O carb and cam in it. wasnt much faster. Clutching it out right does the trick.

[@JohnCollins-kv5kj]

Hello my question is what years does this work. I have a 2000 with a 425 motor

[@MarkBryant-ed2hv]

Ever build a Polaris 500 sportsman for a racing application?

[@TitaniummanGarage]

No. I've always wanted to find a way to make it faster. I even tried a slide carb.

[@hankpikuni7024]

What would be some damage to look for when a timing chain goes out?

[@TitaniummanGarage]

Check the cam, gears, inspect the area for any damage and make sure the woodruff key didn't break. You also have to consider why did it break? Piston shot? Cam seized?

[@christopherduclos1595]

Is this pretty much the same procedure as a 06 sportsman 450 motor

[@kevincassell6502]

Are all the 400HO engine crankcases interchangeable with 500s? I have a 2009 sportsman 400HO. Does it mater what year 500 jug i use? Thanks

[@TitaniummanGarage]

That I would have to research. The older 400's had shorter connecting rods. No it doesnt matter what 500 jug. they are all the same.

[@simonnystrom8137]

@13:10 you say: "Most of the other parts are (from) 425." I´m planning to do the same upgrade, what parts besides the jug and piston do I have to change on my 425? Thank you for great content!

[@TitaniummanGarage]

The lower end was a 425. the upper was a 500 piston and jug.

[@franklinarguedas4832]

I will take a look at the oil pump replacement, what made me question following that path was that a Polaris Dealer said to me that Polaris oil pumps are virtually indestructible, and they hardly ever fail, however, it is worth my while to take a closer look, hopefully, the cylinder head is not irreparably damaged, they are bloody expensive. KInd regards and thank you, Franklin

[@TitaniummanGarage]

You could take the cam out and turn the engine over. See if oil comes up to the rockers. That how I test my oil pumps . If no oil it could be the pump or the oil port is plugged where the cam cover is.

[@ah100bandzent]

Great video. By chance do you know the name for the tool that removes the crank timing chain sprocket?

[@TitaniummanGarage]

Crank shaft nut tool socket. On ebay.

[@ah100bandzent]

@@TitaniummanGarage thanks

[@michaelheverly1099]

Does a 97 polaris xpress 300 have a timing chain

[@gvn-xk6eq]

How do you tighten up the crankshaft cam cog is it with a castle socket ??

[@TitaniummanGarage]

you could buy a socket for it. I used a air hammer to do it.

[@gvn-xk6eq]

@@TitaniummanGarage do you have a link or the name of the socket mate sorry to be a pest I really appreciate it

[@jackgiljr]

Great information! You just got a faithful subscriber! :) I hope you can answer a question for me and save me some time. I recently rebuilt a 2003 Polaris 700. It has been running fine now I have water in the oil. I can see seepage from the side stator casing. Do you think it would be the oil seal or head gasket?

[@TitaniummanGarage]

I had one too. Its the Mechanical water pump seal. It could leak into the engine. But you said water right? Or coolant?

[@jackgiljr]

@@TitaniummanGarage Coolant.. I think water pump and water comes out of my mouth. You never hear them called coolant pumps. LoL

[@TitaniummanGarage]

Lol. That what I thought. But yeah..the mechanical water pump seal leaks, gets in the engine and oil. The 70's are known for it. I have a video how to replace it.

[@TitaniummanGarage]

700's. Not 70's.

[@jackgiljr]

@@TitaniummanGarage Thanks, you probably saved me some time attacking it at the right end first.

[@wickedapollo7075]

Is this the same for an 05 sportsman 500 ho? The engine seized up and had a rod knock before hand, needs a rebuild

[@TitaniummanGarage]

Yes. The only difference is the chain tensioner. The 05 is smaller. Nothing to worry about. Other than that everything is identical. I just rebuilt one.

[@markwallace8497]

So I have a 1995 425 and I keep breaking timing chains. What could be the problem?

[@sorehair7075]

hey there enjoy your vids! I have a question if you dont mind. I have a 2001 pol. sports. 500 ho. Need to replace the cam. Am looking at a kit from Niche. Have you used them? What would you recommend? Thanks!..

[@TitaniummanGarage]

Glad to hear you enjoy the vids. Niche is good. I've never had a problem with them.

[@sorehair7075]

@@TitaniummanGarage thank you sir!

[@StroFly-pw1og]

I need a head gasket job done

[@jacobziegler1188]

How do you tighten the bolt that hold the chain sprocket on?

[@TitaniummanGarage]

Keep at TDC. Use loctite and snug them up. You should be able to tighten them in that position .

[@shawncordeiro5078]

is that a yamaha snow blower ?

[@chrisstevens335]

You mentioned the crankcase was cracked. Did you just get one used crankcase half and mismatch it with yours or did you use a used pair?

[@TitaniummanGarage]

I used a matching set. I have done a 400 2 stroke with missing match set and had no issues.

[@TitaniummanGarage]

Miss matched

[@chrisstevens335]

Thank you for the reply on an older video. I managed to crack the right side case while pushing in the counter balance bearings.

[@norain31]

so you said head and cam shaft was the same on 425 as 500 is only the valves different ?? are they larger on a 500 .?? asking because 425 parts are like 1/2 price of 500 parts i find .

[@TitaniummanGarage]

Same

[@norain31]

@@TitaniummanGarage wow so the only thing differnt is the bore and pistion ?? sorry last time i'll bug you .

[@TheTechGuider]

can you pull the whole engine out of a sportsman or do you need to take the top end off to get it out?

[@TitaniummanGarage]

You can pull the whole thing out.

[@TheTechGuider]

@@TitaniummanGarage my secondary clutch is stuck you got an easy way to get it off

[@jaywinters2483]

This is a great video. Just subscribed. Just got my 1st Sportsman 500 w 900 hours. The engine has a little knock. (It's not a deep knock like low end.). I've noticed other Sportsman 500's on KZbin have the same sound. What is it? What do I need to do? Preventative wise?

[@TitaniummanGarage]

It could be the clutch buttons. The lifters and chain make that noise as well when they are worn.

[@jaywinters2483]

@@TitaniummanGarage Started it up again today. Sound goes away when rev it but it smokes around the head/valve cover. Shut it down right away. I ordered cam & rockers. Should I pull the head to see if there is piston slap? Pretty sure the knock is from the engine.

[@TitaniummanGarage]

@@jaywinters2483 could very well be. I did a video years ago on a ATP. Turned out half the piston skirt was at the bottom of the engine.

[@hankpikuni7024]

Does oil need to be drained before removing stator bolts?

[@TitaniummanGarage]

Some oil will leak out if you dont. Not much.

[@trentelliott1473]

I have an 03 500 that I picked up and it must have overheated in the past because the piston pin was welded into the crankshaft. I took the water pump cover it inspect the propeller and noticed what looks like hairline cracks . The are no visible cracks on the outside of the crankcase. Would you say this is a big issue?

[@TitaniummanGarage]

You have to ask. Why did it over heat? If the mechanical seal wasn't leaking and those hair line cracks are by the pump. I dont know If I would trust it.

[@trentelliott1473]

@@TitaniummanGarage thanks for the feedback. My thoughts too but wanted your opinion. Thanks again!

[@TitaniummanGarage]

@@trentelliott1473 Sometimes you need another person to bounce an issue off of. I do it all the time. It's all good..

[@futuregamer5791]

72inch pounds on both head covers and tensioner center bolt

[@deanjellots9912]

I have a qustion on a 96 sportsman 400

[@franklinarguedas4832]

Hi again, do you happen to have a dowel pin lying around that you may not need? Ia m short of one. How much do you want for it, if you have it, and how much to send it to Sydney, Australia? Thank you

[@TitaniummanGarage]

No, Sorry I don't. I need all mine.

[@prestonprice4589]

Hey buddy I’m working with a 99 sportsman 500 oil is leaking from front exhaust manifold and when it runs it blows white smoke. Could it be my piston rings or a head gasket? Any knowledge or suggestions is greatly appreciated I’m debating on rebuilding the whole engine

[@TitaniummanGarage]

Actually It could be both. the oil ring or head gasket letting oil seep into cylinder.

[@RayofallTrades]

Losing coolant, black oil, fouled plug (if so what color)? Air bubbles in radiator? Top end rebuild easy pretty easy and common

[@futuregamer5791]

link to buy the manual?

[@jhonnygonzalez1623]

One question, that head is from a Polaris Magnum 425..

[@TitaniummanGarage]

Yes. Its the same as a 500.

[@TheTechGuider]

How did that crank just slid in lol. Arnt they pressed

[@TitaniummanGarage]

If they are Polaris isn't doing it very well. LOL. I've done quite a few and they all slide in. Some with a little persuasion. The 400 2 strokes are pressed in that I can tell ya. I need a press to get them out.

[@jitheeshmaniyalil6911]

7:00 , what about woodruff key?

[@geezusfrye3087]

I bought a ,ran dry of oil, seized up 400 sportsman. What are the chances this would fix that?

[@TitaniummanGarage]

Similar engine. Depending where it seized up

[@franklinarguedas4832]

One more question Sir, How can you tell when the oil pump is not working? The pressure is minimal and I had my Sportsman 500 HO shear the timing chain sprocket, I guess it seized out of lack of oil.

[@TitaniummanGarage]

I had one that snapped the chain. I would replace the pump. Also check the hole where the oil comes in by the head .see if it's not plugger. It should be by the cover to pull cam out.

[@RayofallTrades]

Any chance that you forgot to prime the pump after an oil change? Requires pinching the reservoir hose for 10 seconds....

[@TitaniummanGarage]

@@RayofallTrades That's a great tip. Thanks.

[@jmartinezstudios]

Do you ever use blue lock tight?

[@TitaniummanGarage]

Yes I do, but for the video I don't show it. It would make the video too long if I showed every bolt.

[@FredRobich]

Awesome video man. Just to confirm this is the normal 500 and not the 500 HO Piston/Cylinder, correct?

[@TitaniummanGarage]

Yes, it should be the same. The 500 ho has the same piston

[@FredRobich]

@@TitaniummanGarage Sounds good, thanks!

[@gshew6769]

Did you use a crank and rod from a 425? If so that should be a 465cc. I’ve been wanting to build one for a while. Basically put a 500 top end on a 425. Then use the h.o cam and intake /carb.

[@eyeballengineering7007]

Hopefully the rod is longer. He never checked deck height. Hopefully it's not 7x1 compression now. I am planning the same

[@gshew6769]

@@eyeballengineering7007 have you calculated the compression to be 7:1 if using a 425 bottom end and 500 top end ? I was always curious. I think I remember the 425 being 8:1 and the 500 is 10:1 roughly.

[@eyeballengineering7007]

@@gshew6769 no, I went down the rabbit hole last night. The cylinder height is apparently the same. It's only the rod length that changes. So it should actually increase the compression directly between what the Magnum 425 and the 500 have stock. The magnum is 9.2x1 while the 500ho is 10.2x1. so the 465 with the same chamber and deck height should be approximately 9.7x1. I could not find the chamber size or the head gasket thickness. When I get my motor yanked apart I'll know a lot more. That's why the numbers are approximate.

[@gshew6769]

@@eyeballengineering7007 very interesting, keep me updated my old 400 is pretty lazy and I’m considering doing a rebuild on it and adding some stuff like a cam , bigger carb etc. might even do some at home port polishing.

[@nadinerivet6084]

Is namura piston set worth saving $ or stay with wiseco

[@TitaniummanGarage]

I've used namura most of the time. No issues here.

[@nadinerivet6084]

@@TitaniummanGarage great thank you!

[@DerBoss-hr3ts]

can you really reuse the cylinder head bolts ??

[@chrisschmitz1926]

Did you put a new oil pump in it

[@TitaniummanGarage]

No I didn't need to.Most of them are rock crushers.

[@codybowden7636]

Great videos very helpful !! One question what are the torque spec on the jug bolts ?

[@TitaniummanGarage]

There is a link in the video for another video I have doing the torque sequence.

[@eduardofeliciano9990]

I have a serios problem I hope you can give me an idea ... a friend broke the water pump shaft on my polaris predator 500 2007 an I open the cases put everything back together an when i tide the case bolts the piston won't turn it gets so hard the. I untide them back an it move do you have an idea what can be holding it

[@RayofallTrades]

Did you change bearings and not set them proper depth? Forget shim placement or maybe order the wrong impeller? Are you sure timing chain is correct?

[@eduardofeliciano9990]

It was the bearing wasn't all in thank you so much I have it done