Carlos....thank you so much...I am a new widow and have had to learning many new things ..your instructions were perfect....my spout , I repaired and is awesome....thank you so so much!
@vickijd2221 күн бұрын
I'm also a widow, for 22 years had the benefit of being married to a man that could build or fix anything, but no more. As soon as he was killed all hell broke loose around here... I'm hanging in there, through the use of YT. I even replaced my kitchen faucet & installed an under the sink water filtration system. Stay tough! 💪
@markfleming-e7k9 ай бұрын
Thanks very much Carlos! I'm waiting for a little warmer weather and then will do this.
@DIYPlumbingGuy9 ай бұрын
For sure... good luck!
@glenpowell79343 ай бұрын
Thanks! This is a very informative video. You jumped right into the problem and explained everything very clearly and quickly. Great job! Thanks again.
@DIYPlumbingGuy2 ай бұрын
You're welcome!
@nambuck55832 ай бұрын
Thank you, very helpful specially with the link of the items you were using.
@everythinghomerepair1747 Жыл бұрын
This was great until the end when you pushed the diverter down while the water was running. That’s a sure way to ruin your new spout very quick. Always turn the shower off then push down the diverter.
@DIYPlumbingGuy Жыл бұрын
👍 Good tip! Thanks for sharing your knowledge and helping the community learn together. By the way, I love your channel and how you empower people to learn as well. Keep up the great work
@chrispaul409611 күн бұрын
I have a spout only with no diverter. The spout lets out a lot of water while the shower is running which makes the shower stream weaker. Would just changing the spout since it is old an corroded inside fix the leak im having while running shower?
@cristinaferreira22308 ай бұрын
Thank you great video
@DIYPlumbingGuy8 ай бұрын
You are welcome. I’m glad it helped you out!
@nicholaszenga4388Ай бұрын
What do you do, if you have a shower head that’s turned on by a faucet rather than at the spout? I’ve got 3 separate faucets one for hot one for cold and one to turn on the shower
@carlee7199 ай бұрын
Thanks for this video! My install was a breeze!
@DIYPlumbingGuy9 ай бұрын
Glad it helped!
@murataksu649626 күн бұрын
Great video! My spout was leaking. It’s thread one. I replaced with new one. I put tape over thread then put new spout but it’s still leaking. So annoying! What am I doing wring?
@ryanprichard179320 күн бұрын
Not sure if you got this fixed but I believe you need to replace the cartridge in the handle to stop the dripping
@rogerh2694 Жыл бұрын
If your copper pipe extends out further, say 1.5 to 2 inches, do you just not add on the 1st part of the plastic extender? Is there a universal rule to how far copper pipes should extend out the wall so tub spouts can be installed smoothly? I see vids with pipes extending out few inches vs one's just less than an inch. I appreciate your help, bro.
@DIYPlumbingGuy Жыл бұрын
Thanks for the support!! There is no rule how much it has to extend out. It simply becomes a preference for when installing the finish spouts. Some tub spout kits required the extra few inches to slide an adapter that will secure the spout, while others will screw direct to the pipe it self. I hope it helps, and thank for a follow up video idea 😉…
@rogerh2694 Жыл бұрын
Yea for sure! It takes a few tries and sure is worth the effort though, saving you money. Also, mine needed a rubber gasket to prevent leak from behind the spout which I finally figured out. It's these little things like this that you almost call the plumber for lol.
@BC-lo7kv11 ай бұрын
@rogerh2694 I needed the gasket for my 2" copper pipe so it didn't leak too. Did you use the gasket that came with the Danco spout?
@rogerh269411 ай бұрын
@@BC-lo7kv Damn, this was 8 months ago lol. I believe so but my memory is vague now. Recall going back n forth several times to Home Depot back then and putting the project on hold for a few months & just used another shower as I couldn't get the cartridge in, then came back to it. Fun stuff!
@BC-lo7kv11 ай бұрын
@rogerh2694 Oh yeah. Been back and forth a few times, too! 😂🤦♂️ this is the only shower. So got to make it work soon. Lol. Cool, thanks for the response. I might try a different brand.
@normandrental2695 Жыл бұрын
This is so good!!
@DIYPlumbingGuy Жыл бұрын
Thank you so much! I'm thrilled to hear that you found this video helpful. Your feedback is greatly appreciated! 😊
@annaarakelyan2026Ай бұрын
Hello. Do we need to close water supply to change the wall tap?
@debrahjohns5869 ай бұрын
Very nice job
@DIYPlumbingGuy9 ай бұрын
Thank you! Cheers!
@MrMafioso_1 Жыл бұрын
Phenomenal.
@DIYPlumbingGuy Жыл бұрын
Appreciate!!! Thanks for watching.
@josephwilliams54847 ай бұрын
If u had a cpvc pipe with a threaded connection on end of pipe would you be able to thread the spout right on without any of the plastic pieces inside of spout?
@DIYPlumbingGuy7 ай бұрын
This one yes, it’s a universal kit, it has the option to thread right in.
@aprilwaller123 Жыл бұрын
What if you?r shower head has good pressure ,but the leak is coming from the tub faucet only?
@DIYPlumbingGuy Жыл бұрын
Having proper pressure to the shower head, only means that the leak in the faucet is not big enough to affect the shower head. This fix should stop the leak. 🛠️👍
@DEADIKATED6 ай бұрын
My pipe extends about 3 inches from the wall and is threaded but the threads are damaged and the spout replacement shot off I tried but can’t unscrew the copper pipe to replace it
@nybiggs2 ай бұрын
3 monoths too late but might help the next person.... copper pipes don't screw into each other, they are generally soldered together. Trying to twist a pipe off might damage the pipe so don't even try that. You need to cut the pipe, then either restore it by soldering on a slip coupling and threaded connector again. Alternatively they also make slip fitting tub spouts which go on bare cut pipe (no threads needed). You just have to find the appropriate length one to match the copper pipe.
@raquelvs734 ай бұрын
Why do we use the tape?
@familyman8439Ай бұрын
Awesome
@UtubeAdviser6 ай бұрын
I always use just regular white teflon tape and I’ve never ever had any leaks
@sethurk2 ай бұрын
Great video. The basic design of the tub spout and its water blocking mechanism is wrong. Its not correct to have a pull/push mechanism to be used on a daily basis. We need some other better design for this shower/tub water source combo.
@percussion4U8 ай бұрын
🎉🎉💯👍
@DIYPlumbingGuy7 ай бұрын
Thanks!!!!!
@aaronalcaraz1959 Жыл бұрын
gracias carlitos.
@DIYPlumbingGuy Жыл бұрын
De nada. Gracias por apoyar el canal.😀
@xxmyspac6 ай бұрын
What was that blue stuff glue ?
@eramirez1981216 ай бұрын
It’s pipe thread sealant aka pipe dope
@DIYPlumbingGuy6 ай бұрын
Correct.. Monsters pipe sealant.
@candetect757626 күн бұрын
still have a little dripping you need to replace cartridge
@fredmccurdy78445 ай бұрын
The water was still dripping!
@JustinThaler3 ай бұрын
How much is this job worth because my landlord will want me to do it myself and give them the bill.