I'm just learning about this, so if I'm correct when your running these dynos, in between the runs your adjusting the tuning? If so, makes sense. I see a lot of people lose some weight and get a tune but they don't actually dial it in like this. They just kind of plug and play with the knob 1-4 etc.
@bradleewitt4048 Жыл бұрын
Could I put a 4th gen compressor housing on a 5th gen turbo? So I can run a 60 mm billet wheel?? Or just have 5th gen milled out??
@POINTBLANKPERFORMANCE Жыл бұрын
That’s a great questions sir we’ve never tried this !
@docksidemarine42732 жыл бұрын
I really like that blue. Looks excellent!
@POINTBLANKPERFORMANCE2 жыл бұрын
Thank you sir !
@4wdiesels2 жыл бұрын
How on earth is that stock 68RFE even holding up at this power level? Does he at least have a built valve body in it? I'm curious because my '19 has a Revmax billet valve body and 225psi line pressure and nothing else and I'm scared to run 500hp through it! For the sake of guessing, I'd say 765hp 1375trq on that Mustang dynamometer which are known to be frugal with #s...
@paulwiest81672 жыл бұрын
That’s baffling me too. I suppose this guy is not worried about the trans failing and will probably replace it as soon as it does. I’m in the same boat as you though. Looking to regear and do the valve body before I add any more power. Currently on 175 psi TCM tune on the stock VB.
@kyleparks62892 жыл бұрын
My 68rfe went and said good bye at 515whp, cldnt even tune the truck after doing the injectors.
@paulwiest81672 жыл бұрын
@@kyleparks6289 did you end up rebuilding the trans?
@alexchavez54712 жыл бұрын
780HP, it has the potential. Just the 64rfe trans is the weak point in the setup
@stevenmiller38872 жыл бұрын
803hp, 1336 tq depending on how the trans holds
@22snipes2 жыл бұрын
818hp 1221torque 👌🏻 keep killin it gents!
@POINTBLANKPERFORMANCE2 жыл бұрын
🖤🖤🖤
@Jason.O3797 ай бұрын
going to need a trans to get it to the ground eh
@mattrankin42372 жыл бұрын
750 HP 1385 TQ
@TheSavanto2 жыл бұрын
Does that setup have a waste gate?
@hamwallet7069 Жыл бұрын
How the internals hold up on 5th gen? Stock internals or upgrading rods, etc
@lanceevans40532 жыл бұрын
Can’t wait to bring my truck over
@JT2JZ2 жыл бұрын
741whp just to keep it relatively safe until built trans
@dixOut5.72 жыл бұрын
Idk. I have 1086hp and when I had my stock trans on here it burnt up within 2 days of driving before I put a built one, and at 821 in tune 1 same thing, so I wouldn’t risk that 68 lol
@POINTBLANKPERFORMANCE2 жыл бұрын
With a 10m pump ?
@dixOut5.72 жыл бұрын
@@POINTBLANKPERFORMANCE my truck? No I have dual CP3’s, and a ton of other stuff done but I have a fully custom build 68. But if that truck is g2g with a stock 68 that’s not bad but would hate to be stranded after doing a light pull in that thing lol
@kh84732 жыл бұрын
When will we see more on the 2022 in the last video??
@POINTBLANKPERFORMANCE2 жыл бұрын
Working on that ! Shooting for 2 / 3 weeks before it makes it on the channel !
@princenasser57432 жыл бұрын
740whp
@toddgarrett17682 жыл бұрын
608 and 1139
@saltyomalley3096 Жыл бұрын
Did you guys build the compounds?
@POINTBLANKPERFORMANCE Жыл бұрын
No sir !
@mikevernon74272 жыл бұрын
Is the second gen swap the way to go for compounds
@jeffreyvandenbiggelaar13997 ай бұрын
Most definitely
@Mrodg_2 жыл бұрын
748hp 1240torque
@tyler14702 жыл бұрын
793 HP 1281 TQ
@gutierrezc87092 жыл бұрын
What's that tiny fan for?
@johnnybags872 жыл бұрын
685rwhp and 1095tq
@ajhollingshead99162 жыл бұрын
838 / 1290tq
@sticctalk007 Жыл бұрын
What wheels are those?
@POINTBLANKPERFORMANCE Жыл бұрын
Specialty Forged !
@gacusdt2 жыл бұрын
Can I know where did you get intake manifold for 5th gen ? I'm looking all over the places and can't find with description says good for 2020 !
@POINTBLANKPERFORMANCE2 жыл бұрын
Pusher Intakes sir
@gacusdt2 жыл бұрын
@@POINTBLANKPERFORMANCE yes but there is no manifold intake at their website for 2020, I get hold of them and they say that they won't have any for 5th gen until new year , one that is available on website is for 2018 which will technically.work if you make fuel line dent little deeper, that's why I'm asking where did you get it , did you make any modifications like this dent to be little more deeper for fuel line clearance ?
@POINTBLANKPERFORMANCE2 жыл бұрын
@@gacusdt We offer its 100% ready to install if you wanna holler at shop sir !
@gacusdt2 жыл бұрын
@@POINTBLANKPERFORMANCE link please of course , I will place order now !
@POINTBLANKPERFORMANCE2 жыл бұрын
@@gacusdt We can email you sir if you’d like , we don’t have them up on the site .
@mpaoness2 жыл бұрын
758hp 1290tq
@show-mediesel81682 жыл бұрын
693hp 1189 tq
@johnnickles82302 жыл бұрын
850
@mattward3302 жыл бұрын
764hp and 1325tq
@andrewcrouch46862 жыл бұрын
775hp 1300 torque
@sethseth88882 жыл бұрын
768 hp 1386 torque
@jimmiewasson45652 жыл бұрын
740
@davidbetancourt1of12 жыл бұрын
700hp 1200 torque
@134nick2 жыл бұрын
714hp 1330tq
@granth33622 жыл бұрын
762/1302
@stretchsws62 жыл бұрын
805 hp 1310 tq
@The_Coleman2 жыл бұрын
760/1240
@84ydurmi2 жыл бұрын
697hp 1077tq
@curtbernard7552 жыл бұрын
I’d guess around 750 horsepower maybe 🤔
@curtbernard7552 жыл бұрын
Dang I was actually very close !!
@leonardriddick2 жыл бұрын
704 hp /1216 tq
@DavisSquadElite2 жыл бұрын
720
@zacharybuck83822 жыл бұрын
707whp
@austinmetcalf71182 жыл бұрын
722 1250
@XCXFlashBang2 жыл бұрын
777 hp. 1291 torque.
@troymerritte18112 жыл бұрын
803HP 1405Torque that 68 will take it!
@dingo31902 жыл бұрын
711hp & 1650tq
@matthewsteadman57402 жыл бұрын
Ya my as well order the Trans now lol
@POINTBLANKPERFORMANCE2 жыл бұрын
Faith!
@caydencrawford96832 жыл бұрын
795
@zmx11092 жыл бұрын
755hp
@mikeb63002 жыл бұрын
I’m predicting that the engine will build 775 hp and 1375 lbs of torque that’s if the trans does not grenade.
@POINTBLANKPERFORMANCE2 жыл бұрын
Must have faith !
@mikeb63002 жыл бұрын
I have a 2017 Ram 2500 megacab That I bought just a year ago And currently has 46,000 miles on it and have done mild upgrades so far I have done a banks cold air intake, Banks monster Ram air intake, Banks PedalMonster, and ATS trans thermo bypass, do want to do other upgrades down the road, What tuner would you recommend When I’m ready to do other upgrades?
@FernandoSanchez-jm7mi2 жыл бұрын
700
@bird30222 жыл бұрын
700 1300
@bunchsdieselperformance12552 жыл бұрын
745/1290
@toddgarrett17682 жыл бұрын
653 hp 1147 torque
@POINTBLANKPERFORMANCE2 жыл бұрын
Killing me Todd !! Lol the L5P kicking ass ?!
@toddgarrett17682 жыл бұрын
@@POINTBLANKPERFORMANCE out runs ram trx all day! Lol
@POINTBLANKPERFORMANCE2 жыл бұрын
@@toddgarrett1768 Lol o help me Jesus !! 😎😎
@CountyCreekHomestead2 жыл бұрын
835 hp, 1220 tq my guess
@donaldstasche47952 жыл бұрын
818hp, 1211tq
@billyrose71812 жыл бұрын
725hp and 1280 tq
@KingEbby2 жыл бұрын
640hp 1100tq
@brandonb86982 жыл бұрын
815hp
@frankmills47012 жыл бұрын
725hp
@fredcalder28692 жыл бұрын
793 hp and 1307 tq
@The1m162 жыл бұрын
790HP/1465TQ
@josephrogers29602 жыл бұрын
786hp 1258
@moparblood2 жыл бұрын
819hp 1670trq🤔
@rob668672 жыл бұрын
706hp, 1267tq
@juancpereira50622 жыл бұрын
760hp
@zakerycampodonica882 жыл бұрын
850hp
@kris76stewart2 жыл бұрын
804
@briangarcia58942 жыл бұрын
784
@hawserdog22 жыл бұрын
805hp you will bust 800 for sure
@POINTBLANKPERFORMANCE2 жыл бұрын
If not we burn it 😎
@hawserdog22 жыл бұрын
@@POINTBLANKPERFORMANCE hi Tyson ..this is Dave hochstedler ..I don't know if you remember me but I'm the one in Granger ind. That called you Alot when I was installing my first turbo I got from you guys ...it's all good and running great ..I have a 2015 dodge 3500 with a 6.7 and wondering what your next step would be on building this truck?
@POINTBLANKPERFORMANCE2 жыл бұрын
@@hawserdog2 Hey sir !! For sure would be a Fass Fuel System!
@hawserdog22 жыл бұрын
@@POINTBLANKPERFORMANCE would I have to change the injectors when I do that? Whats your thoughts on the intake manifold