Comprehensive Review of DC Electronic Loads: ETS-5410A

  Рет қаралды 714

FEPLabs Radio

FEPLabs Radio

Күн бұрын

Пікірлер: 15
@HamRadioA2Z
@HamRadioA2Z Жыл бұрын
Thanks for the shout out Jim! Nice review on the load. I need to look into one of those. I used to have access to electronic loads at work that could do hundreds of amps and hundreds of volts. I miss that capability.
@FEPLabsRadio
@FEPLabsRadio Жыл бұрын
Any time! I needed the darn thing when I was troubleshooting the Astron PSU. Better late than never. The more power it can handle, the price gets stupid high, real fast. This one should do for most anything I need, I hope.
@LeeMcc_KI5YPR
@LeeMcc_KI5YPR Жыл бұрын
Battery tests do not need many dynamic load tests, maybe a bit for the BMS. But linear supplies do, and switching supplies much more so. Attaching a storage scope will capture finer over/under-shoots better than the load.
@FEPLabsRadio
@FEPLabsRadio Жыл бұрын
Lee, that is probably more advanced than I am going to use it for currently(see what I did there!). I've read that one of the downsides of this unit is that it is slow on response. Hooking the scope to it would work out well.
@AndyAAzeroAM
@AndyAAzeroAM Жыл бұрын
This is cool Jim, thanks for the video
@DonzLockz
@DonzLockz Жыл бұрын
It looks very advanced and very cool. I dont think I need one yet but I'll add it to my big wish list.🙏😊
@TheGmr140
@TheGmr140 Жыл бұрын
Nice unit 😊
@zacki5663
@zacki5663 Жыл бұрын
really wish all linear power supply reviews were like this
@robertlau8025
@robertlau8025 2 ай бұрын
Thanks for the review. Do you have a link for the PC SW? Does it run on Windows 11?
@FEPLabsRadio
@FEPLabsRadio 2 ай бұрын
It does run on Win 11, I don't have a link, you'll need to google for "East Tester 5410 software"
@davidbrowne1588
@davidbrowne1588 Жыл бұрын
Hi Jim I use a extra power resistor like the ones used for dump loads for solar, with my electronic load for higher current tests, Thanks Dave 2E0DMB
@FEPLabsRadio
@FEPLabsRadio Жыл бұрын
Great tip! I suspect this should do me for most applications (so far), but that's a solid idea. I need to get some big boy resistors.
@davidbrowne1588
@davidbrowne1588 Жыл бұрын
Also they will get hot, fit in to a box with a fan, like you would do with a rf dummy load, Also for long videos Also use silicone insulation wire leads, Keep them coming, Dave 2E0DMB
@TheSmokinApe
@TheSmokinApe Жыл бұрын
That’s some fancy pants software 😮
@FEPLabsRadio
@FEPLabsRadio Жыл бұрын
Truly, ham software.
#14 Rigol DG822Pro - New FW, 200 Mhz, OwnWaveform - Part 3
26:11
Marcel Mostert
Рет қаралды 681
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Instrument Basics: Electronic Loads - Workbench Wednesdays
10:53
element14 presents
Рет қаралды 43 М.
Linear MOSFET and Its Use in Electronic Load
29:46
Kerry Wong
Рет қаралды 46 М.
Duplexer or  Diplexer?  What is the difference?  Does it matter??
12:40
Iambic Keys -CWops Fundamental Course in Morse Code
6:37
Christian Herter
Рет қаралды 13 М.
Build a Portable Power Hookup for USB and 12 Volt Devices!
15:16
Another cheap scope: $18, shipped! (FNIRSI DSO152)
51:30
Adrian's Digital Basement
Рет қаралды 450 М.
Superheterodyne  AA5 from End to End
11:19
AllAmericanFiveRadio
Рет қаралды 32 М.
EastTester ET5410A+ Electronic Load Review | Voltlog #453
18:49