Compressor tank fire pit build

[@telawright494]

Allen brother I just personally want to thank you for what you do...just a man out here working hard and taking pride in his work. Hats off to you sir.

[@eldorado1244]

I don't own a welder but l admire welders, carpenters, brick layers and mechanic's....you know these profession's you can find work any place in the world...

[@rawbacon]

Been out of the metal business for about 15 years now but it feels good to see someone that knows how to handle a torch.

[@johnhagopian545]

Dilly dilly cutting with torch with straight lines I'm impressed

[@dewayneandrews642]

I like the idea of the AIR COMPRESSOR FIRE PIT... COOL... Can u build a grill out of 1 of those air compressors with a pull handle & wheels & have a ash pan in the bottom too??

[@edgartex9853]

Another video of you making it look easy. Thanks for the content Allen. I learn a ton just by watching the way you do things

[@eddielanger4748]

An artist at work. You make it look easy

[@slm350707]

Brother! I hope the customer loved it! Seems like you really put some thought into it!

[@shawnspidle2530]

That looks awesome. Nice quick job

[@janbaillargeon2763]

I made a barbecuer grill out of an old portable air tank 6 years ago. It works awesome .

[@saltydog888]

The air raid siren noise the welder is making is a classic for a metal working vid

[@mikehornsby599]

Great pit , looks very nice!!

[@gurvinderkau1e5w18]

Great video. Great built

[@tomsawyer247]

I'm sure he will like it nice job I like your Alaskan dog house.

[@ramondiego8146]

Nice very good black smith welding

[@davepelfrey3958]

Really nice job.

[@rockerobertson4002]

omg..I wish you were my neighbor. You are amazing. Great job.

[@buenacg]

Dang. You’re work is really amazing. I’m just getting started with welding and metalwork and you’re definitely an inspiration. Thanks, man!

[@richsellskc]

nice job. better than i expected.

[@davcot3675]

He gets what he gets and like it! Nice job.

[@isidroperezjr.4332]

you have some awesome skills thanks for sharing

[@lukespangler7322]

Another great build !! You are a master at what you do !

[@kennymysak2079]

Another great job and idea. I'm liking the idea of the trailer hitch grill. Keep up the great videos

[@4seasonsbbq]

Awesome job Allen and great idea with the cut out.

[@thebeardedone1225]

I picked up one of those long handle propane brush burners to knock the paint off my used tanks. You just have to have a respirator, because that crap is nasty. I just squirt it down with charcoal lighter fluid, let it set a minute or two, and then go to town on it. You said you were looking for new Ideas: Have you made any fire pits out of washing machine tubs? The perforated section is usually stainless, or porcelain coated though.

[@mmanut]

ABSOLUTELY GORGEOUS‼️👍👍 Vinny 🇺🇸

[@robwhitmore4369]

Looks really good! I want one!!

[@robbobcat7286]

You Got some Skills Bud ! very nice

[@backyardgrillsergeant2649]

Cool Fire pit

[@noneyabezness4062]

Nice Work Allen, man your productive no stops no break. liked the video.

[@JAY-CRA]

2 words “GREAT WORK”👍🏾

[@tonypollard244]

Nice work bro as usual

[@bradthurkle7217]

Looks fantastic mate🤙

[@kevinlesch9656]

Nice to see the torch back out. It seems anyone can use plasma but I know how hard oxy/acet can be but you make it look easy. Nice work as always allen!!

[@johnnyramirez9082]

Good looking pit sir.

[@christofix]

Nice build man! I like that style!

[@heltonsilva8858]

Nice job mam..

[@rippinglips187]

Very good work

[@scottpetrie8707]

Another outstanding project brother! More cylinders? Drum smokers.....

[@realfreshfood4575]

Great as usual. Looking very forward to that hitch pit. Keep it up, Allen!!!

[@hiramrodriguez9544]

The hitch setup sounds great! I think that it would be better with a lid. Please let me know if you do make it. I will buy one from you.

[@jimzivny1554]

Nice project

[@timothyleger4385]

That would've made a good pit ! Great job Allen !!

[@t54760]

Always love your videos. I learn something every time. Hey, Allen if you ever have a mind to, show the layout process. Like how you drew out the chalk lines for the legs. How you got those curves so it looked great and fit the tank. On the tank cut out if you could show your process for drawing the lines for the cuts. It all looks so symmetrical. Thanks again!

[@blindeinsteinnichols2023]

been watching for a while you bad ass with that torch I had to buy a plasma to get my shit as smooth as you

[@charliehustle8096]

That's bad ass!

[@boneal4942]

Great job!

[@whywoulditellyoumyrealname4598]

Glad to see the gas ax back in action?

[@ifell3]

Why did you choose horizontally rather than vertical? Great build.

[@Allensweldingwoodworking]

No reason, I do several verticals also

[@ifell3]

@@Allensweldingwoodworking looking at building from a helium balloon tank, incorporating a BBQ and fire pit. Which orientation do you recommend? Many thanks

[@a_mango9210]

Like your vids man👍🏼👍🏼👍🏼

[@neil19hockey]

Love your workmanship tell me what heat resistant paint do you use thank you from Gloucester.UK

[@notasbignow1]

Hey Allen that's amazing it will be great I think your friends friend will love the pit dude your awesome and I really enjoyed this video amazing as usual Take Care Allen can hardly wait for the next video 🤔😄😄

[@chrishigdon1070]

very nice

[@stevemackelprang8472]

I like plasma, but for some things, you can't beat oxy/acet .. nice work!

[@reedschneider9376]

So now what blade are you running on that chop saw?

[@dalejacaway4881]

Sandblasting probably the easiest way. All the times you can find the hundred and eighty-five CFM air compressors going for sale right after winter heads because the companies to blow out sprinkler lines are going to upgrade and so that's when they put theirs on the market. Same with road construction sells its stuff off in the winter and that it's not actually too hard to build a little Hopper and a nozzle or to find an industrial sandblaster that maybe most of the safety crap is broke on it but you can bypass all that and make it work

[@felipebaltieras6151]

Great work Allen . tell me what grade tubing you use , I have an air tank to make a stand for , thanks

[@buckshothunter2177]

Make one just like that but a Santa Maria grill type

[@levimitchell8047]

Break fluid takes paint off better than paint stripers

[@greganderson6584]

Do you sell and ship grills?

[@koeoo361]

Как всегда у вас ОТЛИЧНАЯ работа💪. Большой и жирный ЛАЙК 😻😻😻

[@darrellshuman7751]

What is the the cutting wheel you use in your 4 1/2" grinder? I can't find anything local that lasts in my town so I need to order something. Thanks for all you do.

[@jrhattenstein]

Looks like just an 1/8" grinding disk

[@ronbowles1387]

SWEET!

[@jceletroeletronica]

Mais um serviço bem feito. Parabens.

[@GD-cs4nh]

How has the tank held up after all the burning you’ve done in it? I’m thinking of using a 22 gallon as a firebox for a smoker

[@Allensweldingwoodworking]

It wasn’t for me so I’m not sure, those tanks hold up pretty good though as long as you use a coal rack inside and have a way for water to drain out, make a ash pan with the part you cut out of tank

[@GD-cs4nh]

Thank you for helping me with that

[@MARTIALCOMBATIVES]

howdo you like that evolution i have one leaks oil where the handle connects to the motor seems to be an issue with them, how many cuts do you get out of a blade i'm finding they are great for a straight cut, but blades are so expensive angle grinder is best, thanks you are a real artist your torch work is just like watching a artist create the masterpiece under the layers of nothing

[@edwinmedina1029]

To remove the paint I used Luster 50/50 with water. I let it sit for 5 minutes and all the paint came off with the water hose.

[@Allensweldingwoodworking]

Thanks!

[@M3Eurotrash1]

What kind of paint do you use? Havent been able to find a paint to hold up to the heat.

[@MrLucifuge1973]

High heat paint is pretty easy to find. www.homedepot.ca/product/tremclad-high-heat-rust-paint-gloss-black-340g-aerosol-/1000406051 Works for me. Been 3 years or so now. If this doesn't work for you then you are sol..unless, of course, you're going to powder coat and bake in an oven. Which just isn't realistic for most. If you Duckduckgo powder coating in your area, there should be someone offering it as a service. I imagine if you brought your own paint it be cheaper. You can get powder paint for around 1$ an ounce

[@mannyfrias45]

Allen, Again great job. Have a ? for u is this your full time job because u make it look like it is 2nd nature to you. God bless...

[@michaeldevlin2685]

Hey there Allen, you do good work your vids are always very clear and informative and the finished product always looks great. Can you please let us all know what brand of paint you use for your projects, I assume it's a high temperature paint. Cheers from the U.K. 👍

[@mrd2817]

U made a grill an a griddle in one that's how I would use it u are blessed 🙏

[@jessemarin5044]

Hey Allen if you made a grate for the top and made a santaMaria grill out of it that would be a great lil bbqr,build a 1-1/4 angle iron attach it to the wires to lift up and down like a santaMaria grill then put the grate in it and or a griddle so that it would be versatile to cook or leave out for a fire to warn up on etc.....you actually inspired me to build my own bbqr and well it's almost done and I think you would like it. I'd like to have your email so I could send you what I built and maybe start your own fan page on builds inspired by your welding utube. If this turns out as good as I hope it will I might even have to make a few more for people but a lot smaller lol...mine is huge 2'X2X7 with and insulated fire box and a warming cabinet it's been a hell build starting from scratch and really learning on the fly but it's been your Utube channel that has been one of my biggest assets as I'm always turning to your pages of expertise and experience on how to fix or do something haha...

[@lukespangler7322]

Where in Louisiana you at ?

[@tristenmcmillan4890]

Allen, Please make the Tailgate Pit Video next!

[@gordjohnson70]

That cut out could be also be used as a snuffer lid. A lot of us like to cover the coals and embers before going to bed. A gust of wind could start a forest fire. A cut off piece of big culvert makes a good fire pit.

[@funkyole1125]

What kind of paint do you use on your grills and pits?

[@Allensweldingwoodworking]

Rust-o-leum high temp paint

[@renerangel3891]

I made a hitch grill with legs and used the handle from air tank to pull it to the park

[@renerangel3891]

Sorry I meant wheels (2)from air tank to roll

[@ajsironworks3937]

Dude your channel is getting so big. Where do you get your compressor tanks? I’m in Idaho looking for some so I can make smokers if they are thick enough

[@klarei4326]

Trennschleifer ohne Schutz-Untragbar dieses Video

[@denvernow7294]

Love the build. But I bet I'm not the only one that wants a little less special effects.

[@asm7050]

COOL

[@countryboy6738]

Dont worry brother I cant hardly say that word either let alone try and spell it lol,,but nice simple build bet it was nice change of pace,,but what ever happened to the trailer smoker build with the deck over in all metal,,bet ya had to beef up the axels on that 1,,but god bless brother keep them coming

[@Waffle_cones]

What's with the phycodelic camera i thought my phone screen was going out...

[@kplandscapinglawncare563]

I've seen a lot of your videos and my question is I run a lawn care business and need welding done occasionally but also I weld everyday on small projects

[@lalotrbeca]

How I can contact you??

[@sn00ch]

What's the price and and do you ship? I'd LOVE to purchase one! NICE work my friend!!!

[@fabianmoya9896]

Basic bbq oils are the best

[@neilpetersen5287]

Fear and loathing in Las Vegas meets Allens welding!!! Dude. Plasma cutting manufacturers are throwing away their equipment once they see they see your skills.

[@The-Sportsman69]

👍

[@sn00ch]

What's zat a Jersey accent? I'd rekkinize that anywhere?

[@robertspike6611]

Iyt could be a good thing it went into the fire first, many a person has been injured and killed cutting and welding on compressor tanks due to the oil residue from the pump, be careful everyone.

[@raziel3726]

Craftsman!!

[@allenwilson9656]

I just got one question ? What kinda shit are you on to make you work that fast ? I need some of that stuff 🤣

[@ColKorn1965]

Now I know what to do with the 3 well tanks somebody gave me.....

[@EasyFirePits_]

And for those who want to convert their wood burning fire pit to burn Propane or Natural Gas look up EasyFirePits online. Marine Grade Stainless Steel Gas Burners and Connection Kits that assemble in minutes. Check us out at EasyFirePits.com! Plenty of Q/A and project pics to inspire those who DIY.

[@eaglehaslanded]

N

[@largerooster2059]

Hey my friend, your work and work ethic is incredible! But do yourself and the people who love you a favor...... Start using the proper ppe for that type of work. Even if you just start by using a fan to draw away that smoke and ground up metal... I have seen my brothers in this trade dying of " copd" or lung cancer or heavy metals poisoning to much in my lifetime. Your a young strong guy today but when you get a little older that shit is going to bite you right in your ass! Protect yourself my friend ! GOODLUCK.