Enjoyed reading the comments. I am the engineer who designed the machine about 11 or 12 years ago. Yes the machine is safe. Yes it is loud. If you use water there is no issue with silicosis. It must be operated in well ventilated areas. It is a diesel so Carbon Monoxide is not a huge issue like gasoline. This operator and company are good at what they do. It is not overkill for the Blade size. This machine actually had an even larger blade.of 60" diameter.
@suphx8 жыл бұрын
A blade that size is at least $2,000. Possibly more depending on the type of blade. You have some blades where the diamonds are bonded a certain way to deal with excessive rebar. And a few other types. They're super pricey.
@sqrlzxbigxnut20187 жыл бұрын
Pretty funny people commenting who have no idea about concrete cutting.
@richyalf7 жыл бұрын
Are the blades disposable?
@georgethomas50577 жыл бұрын
Donald Meister This is a awesome machine.Can i know upto what depth it cuts.Am in demolishing biz.Thanks.
@robertking31306 жыл бұрын
Can you slice cheese witit?
@daris3577 жыл бұрын
You should not be at cutting speed until that blade is in the cut line. Once you lower the blade a couple inches in the cut line you can increase speed to what ever it is you want it at. And always lower your RPMs when you pull the blade out of cut. This is just for safety reasons but the other reason is your blade is clearly wobbling at the higher RPMs and is cutting or wearing into the water supplies lines inside the blade guard. So lower RMPs until inside cut and lower RPMs when you pullout of cut.
@ToriBreeJordyn201 Жыл бұрын
You're sooo right I see what you mean.
@johnnyfannucci9 жыл бұрын
This is like watching the first ten minutes of final destination
@RoyAndrews828 жыл бұрын
HOLY SHIT.. I'd hate to see it kick back..
@MrBmxbrawler8 жыл бұрын
it doesnt kick back. it would jump forward. see the rotation
@15thsquadron017 жыл бұрын
No chain.
@ZS6JMP9 жыл бұрын
Finally Chuck Norris's nail clipper sees industrial use.
@chrisjones236411 жыл бұрын
One of the best jobs a guy can look forward to in the morning....I tell you the truth......
@williewright87876 жыл бұрын
chris jones I start tomorrow as a labor any advise you can give me ?
@aldofrausto38194 жыл бұрын
@@williewright8787 hey did it go are you still working as a labor? Did you like it?
@xMrFuzZyKitteH4 жыл бұрын
teach me
@juantorres84014 жыл бұрын
@@williewright8787 my advise to any laborer who wants to achieve anything more is to watch everyone around you find who is good at the job you want to do and befriend them. And learn a trade
@JohnAnderson-kt4mb3 ай бұрын
As well at the end of a job $$$$$, have a good friend that owns a concrete cutting company in the Midwest, union job, lucrative pay, hard work.. cool shit
@artcarsnguitarsAdamS9 жыл бұрын
So that's how the Egyptians did it...
@jsullivan37368 жыл бұрын
+S.V.A.S good point
@RickDirt115 жыл бұрын
Have a look at TURKEY and SYRIA and LEBANON too
@oscarmzqt110 жыл бұрын
is he cutting the planet in half???
@chrisjones23649 жыл бұрын
It felt like it
@CherrySox6 жыл бұрын
lol
@Lovetolivetruely5 жыл бұрын
Sure looks like it....
@johnfoltz81833 жыл бұрын
no wonder why there was an earthquake somewhere.
@AlphatecEngineering3 жыл бұрын
hahahahaha
@paulmc34573 жыл бұрын
Gotta love going full depth with a 36 inch blade, it's the only thing that would cut right through the concrete at the airport! 👍👊💪
@tazhillleader3 жыл бұрын
When I did Dallas Airport we had to spin 48" on final cut. 60" in certain spots that was wild spinning a 60
@suphx2 жыл бұрын
This looks more like a 48” or a 54” sir 🤣 36” is way smaller lol
@runewarrior010 жыл бұрын
Finally, something to chop my vegetables with for stew
@chrisjones23649 жыл бұрын
👍🍅🍆🍍🍉🍈🍑🍌🍠🍐🍓🍋
@diamondcut220811 жыл бұрын
Good work man, very impressive sir!!!
@mrslkungpowchikn1206 Жыл бұрын
And they say not to do it all in one pass! 😂 Now THIS is efficiency!
@brandoncleveland8704Ай бұрын
Don't think he did probably has two saws with him one with a smaller blade to do the first cuts to keep straight lot of flex in a big blade like that to do a straight pass
@xzantronos2 жыл бұрын
I've used a cutter like this before but smaller and only had 3ft blade on it and was powered by twin cylinder Wisconsin.
@damon2772nomad3 жыл бұрын
Damn...just when I thought I ran a big husqvarna saw, I literally see a guy driving one. Yes I would buy this if I had the money, because my manhood is being challenged. Sure I might go to jail for cutting a road in half, but they would probably have to wait until I hopped off of my saw. Not to mention they would have to help me pick up my giant balls I was dragging behind me.
@tttarms19703 жыл бұрын
Dont let those balls near that blade....lmao
@Az-ov1ti8 ай бұрын
Hahaha
@arctaniunkut1592 жыл бұрын
I would like to know if cutting this DEEP requires a (811 call before you DIG) I think there could be a Gas line underneath the concrete and always keeping in mind it’s all about safety first!
@ricksanchez9669 Жыл бұрын
i do this for a living in Canada. We like to call if theres even a chance we're over lines of any kind. Power lines can be much closer to the surface than you would like.
@johnsomerset15109 ай бұрын
I was looking at people using stone saws like the Stihl ts410 with it 12'' blade (which I'm getting) and was quite impressed. But then this beast came up to look at, which I thought was a funny giant joke cartoon thing. But then you fired up its diesel engine and started cutting with that massive blade! I could hardly believe it was real and nearly fell off my chair laughing.
@christianallen8763 Жыл бұрын
lol the sound of water tubes getting shredded gets me every time :D
@kyleschueler7873 Жыл бұрын
Oh you know that sound too? There isn’t many people that do. I run a construction crew doing highway work in Iowa. We use this exact saw everyday except newer
@MrInternet699 жыл бұрын
They don't rent that at Home Depot!
@marlonquintana34663 жыл бұрын
When the concrete cutter you hire is level 99 prestige.
@jpsholland8 жыл бұрын
Chuck Norris use this saw to cut his baguette every morning.
@tamikamcfarlaneleadon10813 жыл бұрын
I seen my husband use one of these.. Good Job sir..#onelove
@richyalf7 жыл бұрын
Can I buy this at Home Depot?
@Izzy-tc8mc6 жыл бұрын
I seen that blade come off the saw and it flew about 150-200ft into the corn field. The scariest shit ever. The guy turn albino quick never got his color back.
@andressegura58384 жыл бұрын
Concrete cutter/ gas pipe cutter/ all underground conduits cutter and even main sewage line, holy shits that thing will take you within a mile from the earth's core hahaha
@eleven73284 жыл бұрын
laughing at the smoke rings
@bradenkingsley47306 жыл бұрын
I love the smoke rings
@phillipkramer66389 жыл бұрын
How heavy is that thing and do they make a liquid fuel powered model? Gas, propane, alcohol or something similar so you wouldn't need a cord. Also how much electricity does that need? What size generator would you need to power it properly?
@bighit668 жыл бұрын
and to answer your other question at least at hour company we have a 60Kpa generator to run the electric saw off 480 3 phase cable
@michaelgatien42778 жыл бұрын
that's the LARGEST concrete saw I ever........uh, seen :D
@NBT24698 жыл бұрын
And THAT, my friends, is how you slice a pizza pie!
@mykolaparashchak5882 жыл бұрын
I like this machine! Do you think 230/460 vac motor with gearbox can do better? Thanks.
@jerrystackhouse74053 жыл бұрын
Worked at I.H.C. doing exactly that on the airport runway however in 95degree weather 12hr shifts
@stevemurdock754010 жыл бұрын
Could you imagine having that thing catch on something and kickback haha... wholly shit.
@chrisjones23649 жыл бұрын
Don't even talk about that
@chuck23677 жыл бұрын
It runs off of a belt and not direct drive. Of course a big spinning mass could pose issues but if blade gets stuck the belt snaps. Still one cool saw.
@modeldaughters7 жыл бұрын
Steve Murdock Rock saws tend to be less dangerous than wood saws but a binding blade heats up and dishes - freakin' expensive! Not a good job for those who like to daydream, heh heh...
@luisfeliciano07086 жыл бұрын
The machince stalls when that happens.... Automatically shuts off.... Local 57 concrete cutter i see it everyday....
@shawncrisostomi1375 жыл бұрын
They don’t kick back. I use one every day. The blade would just lock up
@baldfatgit18 жыл бұрын
Hell now that is a mans TOOL what a saw :)
@letscook636 жыл бұрын
baldfatgit1 I use one
@user-ds4zd5jt1t10 жыл бұрын
В душевой ремонт буду делать, куплю такой плиткарез ! :-)
@pelassancho246 жыл бұрын
The other end of the blade just came out through my street in downtown Bangladesh! Wtf Chris who's going to pay for the dirt street you destroyed?
@abouomar13596 жыл бұрын
صحيح مزعجه ..... ولكنها عملية ومختصرة للوقت والجهد.👍
@modeldaughters7 жыл бұрын
I'd love to get a bunch of blocks like that - maybe thinner (I'm guessing those are over 6" thick by the blade?). Very neat.
@yourmother638Ай бұрын
6 inches lol try 24
@davidchavez814 ай бұрын
As if it wasn't already comically huge, it had. to shoot out smoke rings like a 1920's mickey mouse cartoon.
@MrRagingbull838 жыл бұрын
On your Step Cut how many passes did it take to cut threw with that setup? Or with that being so powerful you make the cut in one pass?
@MrJackBronson4 жыл бұрын
This is God’s own concrete saw...
@sqrlzxbigxnut20186 жыл бұрын
got some balls starting that out of the cut. let alone reved up all the way
@mechanicojoe6 жыл бұрын
Was this for demoing the concrete, or cutting 1/4 depth of the slab thickness? Im thinking for removal of concrete, either way its BADASS!
@davidfitzgerald36532 жыл бұрын
Removal.
@z1m7x2n69 жыл бұрын
why do you cut this? are you trying to remove floor? in that case custs are not good shaped
@miguelcampos21923 жыл бұрын
You aren’t wearing much protection . Assuming machine is well designed? If blade breaks, how bad can it get you? Covers look on top of blade.
@Alex-qx5rv8 жыл бұрын
Jheeeezzzus... Imagine the kick back loooool
@MrBmxbrawler8 жыл бұрын
why the hell would it kick back. its not a table saw. it rotates forward
@ahornedbeast8 жыл бұрын
It wouldn't kick back, the black is spinning clockwise, opposite a conventional miter/skill saw. It would kick forward lol
@RickDirt112 жыл бұрын
Absolutely.. which is another reason you want a big blade spinning slower. That way if the blade does lock up?? it doesn't lift and throw the saw up and forward at full power. Big blades 42" and up spin slow.. saves the blade.. motor.. and your laborer
@actioncorner31147 жыл бұрын
where does it sell? is it ready for sell on amazon, alibaba or ebay? plz tell me how to buying it , Iam very interest. Iam come from VietNAm. thanks!
@ju5mike9064 жыл бұрын
I wonder how long the blades last, im currently doing a large job, with a core cut cc1200 and i have to cut through paver, asphalt and concrete, halfway through and have used up about 5 blades had to stop because the belt snapped, but boy i can imagine when that big ass wears out you hear some real alien noises.
@aldofrausto38194 жыл бұрын
That is a monster saw. But why go so deep if concrete only seems to be 6"?
@sqrlzxbigxnut20188 жыл бұрын
YOOOO!!!! that Vacuum is bad ass. the Vacuums we have, have the vacuum head and a hose and a wonde. Gonna see if we can find these and order the vacuum. lol
@CarlosGonzalez-kz1tu2 ай бұрын
They suck, 3 have fried in the past week for cutting openings
@reggiefleming77128 жыл бұрын
my friend Hugh Jaynus runs a saw like that. he works for Dixie Normus Construction
@Marcus3.1410 жыл бұрын
The Frankenstein saw.
@chrisjones23649 жыл бұрын
I like that description.
@mattseymour86379 жыл бұрын
Thats what you call a circular saw! What HP is it?
@chrisjones23648 жыл бұрын
84 HP
@modeldaughters7 жыл бұрын
chris jones Whoa! I never would have guessed that - serious grudge slaker!
@CSJiGSaW086 жыл бұрын
This was used for my circumcision LOL
@raforafo14739 жыл бұрын
Beautiful machine.
@hernandez86058 жыл бұрын
good job to the operator, but what people don't know is that he started with a 26" blade then a 36",42"54"with a smaller slab saw a 6600 then you bring out the big8400 that's a huskabarna slabsaw I know cause I have one my company just baught a diamond products slab saw that makes this saw in this video look like a baby toy check it out on you tube search alliance concrete cutting,and look for the video where we are cutting in the navy pier in Chicago il ,4 ft thick with a 82"blade
@The88champion8 жыл бұрын
+Hernandez I watched that video. and that wasn't a 84 inch blade.
@josie40653 жыл бұрын
That’s awesome. Is that a 65” blade?
@tazhillleader3 жыл бұрын
Looks to be a 60"
@jarrheadja15223 жыл бұрын
My 2 concern is why ware a white t shirt when doing this and why the dark safety glasses where are your indoor safety glasses sir
@davidgangadeen57689 жыл бұрын
great piece of tool
@JJR0SS22 күн бұрын
Bro we got it. It's an over cut. I would died had you of walked any further away to watch!
@iceelemonades26326 жыл бұрын
Who makes this machines. whats the model.
@ngwilkum9 жыл бұрын
Do those things have a tilt sensor so they the turn off if they fall over or roll down an incline?
@chrisjones23648 жыл бұрын
Personally I am not aware of any flat saw equipped with a tilt sensor.
@PyroBanditt5 жыл бұрын
"How to cut concrete" ....... With a big fucking saw.
@vcadenas19908 жыл бұрын
I cut concrete too tomorrow I will be cutting 22in thick concrete what is your technique or tip on using big blades Cris jones
@chrisjones23648 жыл бұрын
To start I make sure the blades you use to step cut with are in good working order. No cracks at the segment base or the blade as a hole. Check to make sure you saw is in good working order. Now it depends on the machine you use and operator preference. I would start with a 14"-16" .220, this cuts to a 5" depth. Then I would jump to a 30"-36" .187, this cuts to a depth of 12". Now I would like to put on a 48" .165, but that would only cut around 21". If the concrete won't break (wire mesh at the bottom or even rebar not placed 2" to 3" up off the bottom) you will have to use one size bigger blade at least. Probably a 54". This will get you to 24" deep. Use plenty of water to remove spoils from the cut and keep the blade cooled. Always match your blade rpm to the saw or be sure change to the proper gear. Wear all proper PPE. Safety glasses, hearing protection, ect.
@vcadenas19908 жыл бұрын
+chris jones thanks am on a 32 in and 36 in blade den am putting 42 in blade. so you think a lot of water is better because I been told if you use to much water u can wash of the sharp to cut on teeths on blade. wat is your Technike to cut a rebar running long way in the cut Cuz I ran into one today
@shylonkado98574 жыл бұрын
When I’m walking down the street and see this I get scared and think of final destination
@electric74878 жыл бұрын
Holy crap how deep does that thing cut
@JG74M-Wilfried7 жыл бұрын
El_Ectric guessing that it might be a 48" blade he's likely only cutting 20".
@edibledoctor4233 жыл бұрын
Is that husky saw ? We have core cut
@deviceundertest10 жыл бұрын
Can anybody tell what for they cut this? they will use concrete blocks for something? or kind of demolition?
@chrisjones23648 жыл бұрын
The concrete blocks were demoed and recycled.
@lakhajikharpuse16646 жыл бұрын
How much. I want to buy it .as much as fast . Is any one know the price of this cutter.
@willygp8008 жыл бұрын
what kind of floor do you have to cut that deep is that for driving tanks on
@slicksloth_4168 жыл бұрын
+Willy G P Most likely a foundation.
@Ptik0bj8 жыл бұрын
+Willy G P Airport runways are usually too deep for a regular flat saw to cut. And as stated before, foundations in sky scrapers are pretty thick as well
@fredricful4 жыл бұрын
Jeg sjerer meg rett jennom veggen jir fan
@seeul8rwaynekerr8 жыл бұрын
so it's a huge stihl saw then basically?
@actioncorner31148 жыл бұрын
how much is it? and how is the deep it could cut?!
@LAWLXP2211 жыл бұрын
it was blowing rings :D
@ВладимирЛушник10 жыл бұрын
вот это я понимаю болгарка :-)
@kccoringandcutting20397 жыл бұрын
Hell yeah!
@kolos3pl9 жыл бұрын
нужно такую , только на 22й платформе
@ChicagoCannabisConnoisse-ls4id5 жыл бұрын
Do a video on how to use one of those step by step
@BuffaloBrandedOutdoors5 жыл бұрын
It's not hard at all lmao, I used to cut 1300' a day at 20in deep
@Osramsihosam9 жыл бұрын
Big job for big FS!
@concretecuttingsaltlakecit85438 жыл бұрын
Nice Saw!
@lego4av7 жыл бұрын
can someone explain why are they cutting the concrete like that ?
@mtrclub20682 жыл бұрын
Berapa in mata kating
@eleven73285 жыл бұрын
the smoke rings are funny
@dejffjed9 жыл бұрын
Why are they cutting it?
@chrisjones23649 жыл бұрын
The company wanted to install a new printing press. This floor was at a thickness of 27-28 inches. The new press required a floor thickness of 36 inches. If I remember right it was about 300 ft run end to end.
@AlphatecEngineering3 жыл бұрын
that is a hell saw!!
@PushSueAside5 жыл бұрын
NO OVERCUTS!!! So tired of no overcuts. What saw are you running? It’s nice being able to spin a...42-48? Out of the cut
@zwell5555 жыл бұрын
If he had too he could have double cut it aha. But I feel you.
@PushSueAside5 жыл бұрын
Nathaniel Mapp surprised he didn’t have to.
@dave_in_florida4 жыл бұрын
Boris Badenov requesting when u r done
@simonst-jean46158 жыл бұрын
i have the same but if modified tout put a 72 inch blades
@chrisw71886 жыл бұрын
i can see this thing being on a saw movie set
@phantomofoaktown4 жыл бұрын
They should feature this saw in a slasher flick or the next friday the 13th, or nightmare on elm street.
@yourneighborhoodwierdo83494 жыл бұрын
which saw is that?
@reniumj39 жыл бұрын
What is the brand of that machine? Where can I get one of those?
@chrisjones23649 жыл бұрын
Husqvarna 8400. Olathe KS USA.
@reniumj39 жыл бұрын
Thank you very much!!
@healthyperson82146 жыл бұрын
Wow.. I thought the thumbnail was a fake click-bait!
@kateaitken32307 жыл бұрын
I bet that was $100000
@micjubba7094 жыл бұрын
Earths crust cutter that lol
@gundymetre75714 жыл бұрын
That monster could cut to the outer core
@habeebzy8 жыл бұрын
Looking for the Precision Machine to cut the Concrete[RCC]Pipes of Diameter 600mm in certain degree.Pls send mail to me
@lifeshort11 жыл бұрын
when YOU'RE hungover
@디정6 жыл бұрын
This machine can cut the earth too. (used google translate)
@haroldmclean37553 жыл бұрын
Chew Baby Chew ! 👍
@sinino34247 жыл бұрын
Я уже представил, как эта машина разбрасывает чьи то намотанные кишки
@rickmccaskill78885 жыл бұрын
What does a blade cost for one of these?
@BuffaloBrandedOutdoors5 жыл бұрын
A 48" diamond product blade we used to buy for about $800