concrete mixer truck gets chipped

Foothill Ranch, Ca

[@williammoses6460]

Best rivetbuster work I’ve seen on YT. I’d probably have used a point than a chisel, but that’s operator preference. He’s really a good operator. Breaking the concrete not the drum. ✅

[@mechcntr7185]

Indeed. It was an honor to have worked there, some of the best workers.

[@benjaminh958]

I learned on an old con tech like that.

[@mechcntr7185]

I found myself growing fond of the old truck. It was a work horse, never let me down.

[@Junhodapop]

Só acontece essas coisas se o motorista não tiver cuidado sempre lavo o balão com bastante água

[@ruthbees7214]

Been there done that thirty years of driving readymix. Getting in the drum and Jack hammering the concrete out. Also putting acid on horrible jobs.😁❤

[@CLVideos244]

Thankfully I have not had to go into the drum, we hired outside help for that

[@TommyLFC626]

The last time i got inside my drum it was like being in a Sauna. Never again, had outside help ever since.

[@CLVideos244]

Yes it looks like a brutal job

[@umeshmali5737]

Truck ka On ionisation wire open kar lo. Start nahi. Kar sakta.

[@poke85]

this says very irresponsible and neglected, here at knife river if our truck drums were in this condition u get fired because your costing the company money

[@CLVideos244]

Not my truck

[@Blblazer1210]

Had a guy quit and leave like 2 yards in the truck. That sucked chipping that out. Never let my barrel get very bad so i wouldnt have to be in there forever.

[@mechcntr7185]

That was kind of a dick move of that guy. Thankfully we didn't have to chip our own trucks, 3rd party did it. This plant was pretty high volume, the trucks were running all day and sometimes into the night, 6 days a week. We did hose them out after initial fill and after the discharge, but after a few weeks there was inevitably a build up that needed to be removed. Despite how the truck looks, for the volume they do it is a pretty impressive operation.

[@victorhugoguidoni4447]

Isso é a pior coisa do serviço de motorista betoneira não é facil não... O que gruda muito é o FCK30, O Concreto de maquininha de fazer sarjeta DEUS me livre... Bady Bassitt SP 🇧🇷🇧🇷🇧🇷