Рет қаралды 4,511
In this video I show you how to concrete over concrete and what depth you need which is a minimum of 3inch of concrete. I was trying to marry up with the existing concrete but didn't have the depth there for the concrete had to be broken out along the edge of the existing concrete giving me the depth I needed, at first I thought I'd have to take out all the concrete but once I got some levels set out I only had to break out along side the existing concrete, which was a result.
The average depth of the concrete was about 90mm to 70mm , I also put a expansion through the to stop the concrete cracking out , I used a concrete edging for that & I also put in some 12mm thick reinforced mesh in each concrete bay.
The concrete married in perfect with the existing concrete, it had a tamped finish and all edged out with a Marshalltown edging trowel,
Tip : when concreting on a slope try and get the concrete mixed to the right consistency having it to wet will just make it run on you and cause you problems when laying the concrete
Health and safety:
-Safety Glasses
-Eye Protection
-Gloves
-Safety Boots
-Dust Mask
Thanks for watching! Subscribe to my channel here: / @creativecrambo
📩Contact here: Creativecrambo@hotmail.com
Edited by: sm.editing@outlook.com