They have the Light Show, they have the Bike Show. Now they’ll be having the Enclosed Custom Trailer Show. This trailer is well on it’s way to be’n a Show Stoppa! Your Boy Chris do’n what he do! Raising the DIY bar once again! with an MC Hammer would defeintely say... “You can’t Touch This!” Because it’s simply too mucho Caliente!
@chriscaliente50335 жыл бұрын
Road Glide thanks for the compliments, but I really have no plans to make a show trailer out of it; just another tool to transport my things a little bit easier.
@campupnort1905Ай бұрын
Thx for the video, Chris:)
@kevincchurch23642 жыл бұрын
Thanks for the video !
@josephsanders30275 жыл бұрын
Hey Mr. Calienate, thanks for all the advice and how to vids. I am new to the Goldwing family and I am honored to have you as my tour guide in this new world of goldwing riders.
@chriscaliente50335 жыл бұрын
Thanks Joseph for watching and enjoying my videos, I'm honored to entertain the Goldwing community with tips and ideas.
@alanrobison26575 жыл бұрын
Great job Chris, the paint job on your trailer is amazing!!
@SmokinLoon51504 жыл бұрын
Nice review. You helped my decide on the Condor. Thanks for sharing!
@jefflink46715 жыл бұрын
Have 1 in my 12’ cargo trailer as well, its the earlier metal version with 4 thumbs screws to 2 metal straps mounted to the deck. Yours is definitely a nice upgrade with just 1 thumb screw. I do not trailer often but it has come in handy at times.
@hi-techredneck52935 жыл бұрын
Nice system!!! I'm going to look into that for mine!!! Thanks Chris!!!
@Andricity5 жыл бұрын
Just got one last week, works great
@cwqrpportable5 жыл бұрын
Great video Chris.........well done. I'm looking at buying these products and this video helped very much. Btw, your trailer is to die for. Thanks!
@rdalev14 жыл бұрын
Have the same wheel chock for my Triumph Trophy and it's a nice set up, other than getting the bike out of chock, a problem you probably don't have with a reverse gear. It takes everything I've got to pull bike out but, at least I know my bike is secure when in the chock. Good video!
@darrylyancey67533 жыл бұрын
Chris, what’s happening, great demonstration, I just purchase the wheel chock also. Now I need the trailer.lol✌🏿
@kenjacob5046 Жыл бұрын
What size trailer is that?
@dpcouchjr3 жыл бұрын
Great job and Great video
@deweyshaw72465 жыл бұрын
Chris - What is the spacing between the mounting holes on the TK-3000 mounting plate? My trailer has a 6" wide steel plate welded in the floor for wheel chocks and it'd be great if both bolt holes go through the plate.
@goferizer5 жыл бұрын
Chris, thanks for video. Have you tried the next pin setting up from the first one? I ask because optimal for 130/70/18 front is second pin hole per instructions. Just curious because I installed mine today but have not used it yet just trying to save a step! (2004 'Wing) Thanks
@MarkSmith-sh5xq5 жыл бұрын
Hi ChrisThe cradle that tilts should be turned around ,it says that in the instructions ,if you look at the two ends, they are different.
@terryfulmer69673 жыл бұрын
chris what is the height of the adapter. looking to put this in a toyhauler and want to know if a rug will cover it or the adapter would be high and we would stumble over it
@av8dr5 жыл бұрын
Nice. Thanks.
@tomw5vlt1194 жыл бұрын
Great video and coverage of mount and accessory, perfect, thank you. Looks like a beautiful trailer... what is it?
@jefftilghman90595 жыл бұрын
What is the song and group you used in your Wingding 40 "Wingasm" video?
@chriscaliente50335 жыл бұрын
Jeff Tilghman the artist name is Tucka, not sure what the song is called.
@colingroskopf10635 жыл бұрын
I want to use my trailer for snowmobiles as well. Can you drive over the permanent adapter with a snowmachine without damaging it?
@tomw5vlt1193 жыл бұрын
Doesn’t show the connection bolts between pit stop mount and optional adaptor. The adaptor sits a bit below the mount’s cross bar... especially when the mount is resting atop the horizontal front base support bar... so basically the only part I have concerns about - not shown in video
@dellparker76863 жыл бұрын
Any way for a short person to get the bike out of the wheel chock without a strain?
@chriscaliente50337 ай бұрын
To get the bike out the wheel chock, use the Reverse button on the Goldwing.
@AdventureswithRedbeard5 жыл бұрын
Great install video. Have you thought of getting some of these companies to sponsor you?
@chriscaliente50335 жыл бұрын
I need a good manager.
@noiwright26864 жыл бұрын
Chris Caliente what size holes & bolts are needed to secure to trailer?
@fredjohnson6885 жыл бұрын
Cool
@darrylgerow40402 жыл бұрын
Now that you have had that epoxy floor for 2 years, how is the epoxy holding up? I have read that over time the wood expansion and contraction will crack the epoxy because it does not flex. Thank you.
@chriscaliente50337 ай бұрын
I love my floor Expoxy It’s holding perfectly, zero issues. kzbin.info/www/bejne/nXPYnXahe7-gpK8si=Lcl-l6iSL2qwUVZi
@thomasandrewphd.58444 жыл бұрын
Nice trailer ! I will do one for my bike also. what size is your trailer?
@Jjason6015 жыл бұрын
Gold wings are made to ride cross country😂😂😂
@chriscaliente50335 жыл бұрын
That's very true, but there comes a time when motorcycle owners needs to trailer their bikes for various reasons or helping a friend, I had two long distance trips cancelled in the last 30 days for bad weather, one of them was because of Hurricane Michael. The way I see it having an enclosed trailer doesn't make you less of a man, it makes you more a versatile motorcycle owner with no restrictions, besides I have nothing else to prove everyone knows that Caliente rides hardcore year around.
@Jjason6015 жыл бұрын
Chris Caliente haha I’ll put my street bike it in a minute.
@g41thomas5 жыл бұрын
$300 vs $60 they both do the same greatly! m.harborfreight.com/1800-lb-capacity-motorcycle-standwheel-chock-61670.html